3-pole connectors for 250 volt working, with a 5A contact rating. The earth contact is directly connected to the body shell. Terminations will accept 16/0.2mm cable. Live and neutral contacts on both…
The Neutrik 'Powercon' is a new generation of power connectors following on from the XLR-LNE series, with increased current rating and secure locking. Despite the widespread adoption of the IEC320…
The 32 amp Neutrik 'Powercon' is an extremely robust and reliable, locking, single-phase, AC mains power connector. It is available in cable and panel versions for use on equipment inputs, and is…
A range of dummy plugs, incorporating a finger-grip, that can be used to blank off unused panel connectors, also to protect against ingress of dust. Each version helpfully has the type code moulded…
This fixing plate with M3 threads offers efficient and easy mounting of all D-sized panel connectors, without the need for nuts. It can be used with the connectors mounted front or rear of the panel…
A range of industrial plugs, connectors, socket outlets and appliance inlets designed to meet BS EN 60309 -1:1999, BS EN 60309 -2:1999 and splash-proof to IP44. Connector bodies are resilient…
Commando series A range of industrial plugs, connectors, socket outlets and appliance inlets designed to meet BS EN 60309-2:1992 (formerly IEC309 and BS4343), and splashproof to IP44 or waterproof to…
In outdoor situations, such as outside broadcasts or location recording, it is often necessary to bond the mains supply “Earth” to ground. This might be for a variety of reasons, one of which might…
British made, using heat treated, drop forged, shot blasted, polished face steel heads, with genuine hickory handles, these specialist tools will ensure correct fitting of most earth spikes, as well…
Converts both the UK 3 pin (BS 1363) and 2 pin 5A “shaver” plugs to the European 2 round pin standard (with both side and third earth pin connectors).
UK FP228 Three-pin 13 amp BS1363 fused plug, white hard plastic. UK manufacture. UK/Euro Converter Plug 3 pin 13 amp BS5733 fused adapter plug for cables with 2-pin flat-bodied moulded Euro plugs…
High quality industry-standard 3 pin 13 amp BS1363 mains plugs, with colour coded pins and terminals, robust enough to withstand the rigours of use in commercial environments. Note: These connectors…
A range of UK manufactured mains connectors, all in accordance with BS1363/A (13 amp) or BS546 (15 amp). Note: These connectors are approved for use in the UK and certain other non-European…
A range of UK manufactured mains plugs and sockets, all in accordance with BS1363/A (13 amp) or BS546 (15 amp).Note: These connectors are approved for use in the UK and certain non-European countries…
Cable types Rewireable IEC mains connectors, with good retention in sockets. Female (mains outlet) connectors available in standard 10 amp version (uprated from 6 amp) without keyway, and also 10…
Panel types with filter Male (mains inlet) type with integral mains filter, designed to filter mains borne interference where capacitors alone may prove inadequate. Integral 20mm fuse holder, panel…
IEC AC mains power connectors, non keyed (cold condition), 10 amp 250VAC 50/60Hz rated. Approvals: IEC/EN, UL, AS/NZS and CSA. Cable Types Rewireable male and female cable types with professional…
A range of IEC (CEE22) mains outlet units. Manufactured by Schurter. Technical Specification: Socket outlets:IEC 10 amp (to CEE22) Power input:IEC 10 amp (CEE22) chassis inlet Total load (all…
An in-line mains “splitter”. IEC 10 amp (CEE22) chassis inlet with two shuttered IEC 10 amp (CEE22) socket outlets. Maximum load per outlet 10A, total load 10A. Manufactured by Schurter.
These leads use patented female connectors with an internal locking mechanism which locks in an IEC power inlet, to provide a simple way of securing a power cable to any electrical equipment fitted…
'C'- section cable markers are offered, suitable for moulded AC mains power leads and other cable installations where the markers must be fitted after connector termination. The markers are…
Standard moulded IEC320 female AC mains power connectors, terminated to IEC320 male connectors, UK 13A plugs or to bare ends. IEC320 male connectors to bare ends types are also available. All…
A range of 3 pole mains cables with a variety of connectors and cable lengths. All UK types use 3 core 1.00mm² (10amp) cable, with black PVC jacket. All connectors (except Neutrik XLR-LNE) are…
These innovative products offer a simple, cost effective solution to the powering of multiple IEC320 inlet appliances from a single socket outlet. They feature inline moulded 'Y-junction' splitters…
Neutrik Powercon NAC3FCA connectors terminated to Duraplug UK 13A plugs. All types use 13Amp, 3 x 1.5sq.mm cable with Arctic PVC flexible jacket. Plugs are fused with a 13A fuse.
Please select from the list of categories above
1 Products