BPR JAM - SDI TO SCART CONVERTER - RGB, PAL and audio
Similar to the JEM which provides an SDI to composite and RGB conversion in a convenient package, the JAM unit, in a slightly elongated package, adds embedded audio facilities to the video conversion. The SDI input is via a BNC connector and the composite and RGB outputs along with the first two channels of audio are fed out via a standard SCART connector. Typical applications would be to use a JAM to record SDI signals onto VHS or DVD recorders. The unit is powered via a 2.5mm DC connector (screwlock). Pin 16 on the SCART is identified to +5V via 75 ohms in order to facilitate automatic switching of equipment to SCART RGB inputs.
Two types of power supply are available - a plug-in type, with interchangeable pins for UK/Euro use and fitted with screwlock connector, and a BPR compact in-line power supply with a two-pin IEC figure-of-eight mains input (mating cable is 42-160, not included) and a non-locking 2.5mm DC connector. A SCART line-connector including a hook and loop fastening kit is also available for non-SCART applications.
Input:||SDI (to 601/656) at 270Mb/s|
Output:||RGB and composite PAL, L and R Analogue Audio|
SCART powering:||Ident pin16 and 8 powered to +5volts|
DC input:||5VDC, 500mA|
Mating connector:||Screwlock DC connector 44-244, or any non-locking 2.5 mm DC connector (not supplied)|