These Category 5E compliant screened patchcords are made using Canford's CAT5E-F extra-flexible deployable Cat5E cable. They are fitted with Neutrik Ethercon NE8MC1 connectors at each end. The…
This range of robust stage boxes, patch boxes and multicore cables is designed to withstand the rigours of life on the road. Available in four-way or eight-way configurations with standard…
These Category 5E compliant, screened, adapter patch cables are made using Canford's CAT5E-F extra-flexible deployable Cat5E cable. They are fitted with Neutrik Ethercon NE8MC1 connectors at one end…
RJ45 unscreened patchcords fully compliant to Category 5E 'component level' (as opposed to the lower 'channel level' performance that is found with some lower cost Category 5E patchcords). Conductor…
These Category 5E compliant screened patchcords are made using Canford's CAT5E-F extra-flexible deployable Cat5E cable. They are fitted with RJ45 connectors with black boots at each end. The…
PatchSee is an innovative system for rapid patchcord identification, using plastic optical fibres inside the cable. A special LED illumination tool is placed over one connector boot, which causes the…
Neutrik Etherflex is a ruggedised, deployable data cable for Cat5E applications. It features stranded cores for flexibility, a foil and braid screen for maximum EMI and RF shielding, plus a…
These Category 6 compliant, screened patchcords are made using Cat6 FTP cable, and have Neutrik NE8MC-C6 Ethercon Cat6 connectors at each end. These handle data rates up to 10Gbit/s, and have…
These Category 6 compliant, screened, adapter patchcables are made using Cat6 FTP cable, and have Neutrik NE8MC-C6 Ethercon Cat6 connectors at one end and a conventional RJ45 at the other. Note…
RJ45 patchcords fully compliant to Category 6 'component level' (as opposed to the lower 'channel level' performance that is found with some lower cost Category 6 patchcords). Connectors are fitted…
Flexible screened patchcords for use with Canford RS422 patch panels and any other RJ45 application where screening and flexibility are important. Manufactured using Canford’s CAT5E-F deployable…
There are three types of Krone access plug – two pole listen only (does not break the circuit) and 4 pole, which can be used to break or listen, depending on how it is wired and its orientation in…
Moulded D-sub connector cable-assemblies, with all pins wired. All connectors have thumbscrew fixings. Stock codeConnector 1Connector 2LengthPin wiring 73-1519 pin female9 pin male2m1-1, 2-2, 3-3…
This short cable only has the power circuit connected, and is intended to avoid viruses and other malware being transferred to PC’s and Macs by phones and other equipment being connected for charging…
Highest quality USB cables for transfer rates up to 480 Mbps, compliant with USB 2.0 standard. Available with both Type A (4-pole), Type B (4-pole) and Type B-mini (4-pole and 5-pole) connectors…
Highest quality USB cables for transfer rates up to 480 Mbps, compliant with USB 2.0 standard, using 'Low Smoke Zero Halogen' cable. (LFH - 'Low Fire Hazard') Available with Type A (4-pole) and Type…
‘Firewire’ cables for transfer rates up to 400Mbps meeting the IEEE-1394 specification. Twisted pair construction with foil and braid screening, plus 0.32 sq.mm (22 AWG) power cores enable maximum…
The USB v3.0 'SuperSpeed' specification was released in 2009. Equipment featuring the functionality added in this version is started to come onto the market in early 2010. The connector has an…
These 'Firewire' cables for transfer rates up to 800Mbits/s meet the IEEE-1394B specification. Two individually-screened twisted pair construction with foil and braid screening, plus 0.32 sq.mm (22…
Please select from the list of categories above
2 Products