UK Sales 0191 418 1122     Int. Sales +44 191 418 1133

www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £75
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

28-331

SSE MLT-500 CAT5 ADAPTER 1x video BNC, 1x audio RCA (phono), send

Studio Systems Electronics MLT-500

SSE MLT-500 CAT5 ADAPTER 1x video BNC, 1x audio RCA (phono), send

STUDIO SYSTEMS ELECTRONICS MEDIALINK 500

The Medialink 500 series provides a cost-effective method of transmitting video and audio signals from point to point via a single twisted-pair Cat. 5 (Category 5) cable. This connects on each unit via a standard RJ-45 socket. Broadcast quality signal fidelity is maintained at distances of up to 350 metres. The four different models in the series offer options for full-duplex video and audio (balanced or unbalanced), and RGB/YPbPr or composite video signals. The video distribution is system independent and therefore works with PAL, NTSC or SECAM.

MLT-500/MLR-500

Supports audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The audio interface is unbalanced on RCA (phono), video on BNC.

MLT-500BE/MLR-500BE

Supports balanced audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The MLT-500BE /MLR-500BE are the same as the MLT-500/MLR-500 except that the audio interface is electronically balanced on XLR connectors.

MLT-500BT/MLR-500BT

Supports balanced audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The MLT-500BT /MLR-500BT are the same as the MLT-500/MLR-500 except that the audio interface is transformer balanced on XLR connectors.

MLT-502/MLR-502

This system transmits up to 3 video signals in a single direction over a single Cat. 5 twisted-pair cable. These units are designed for composite video signals but can also be used to transmit 3 component signals (without audio). An additional feature is that power is not required at both ends for Cat. 5 cable lengths of up to 100 metres. For Cat. 5 cable lengths over 100 metres, DC power must be provided at both ends.

Technical Specification:

Video

System compatibility:PAL, NTSC, SECAM, R,G,B, Y,Pb,Pr, or Y/C.
Signal level:1V p-p into 75
Input/output impedance:75 , BNC connector
Frequency response:Within ± 0.5dB to 5.5MHz (up to 350m of Cat. 5 cable)
Bandwidth:-3dB at 8 MHZ (up to 350m of Cat. 5 cable)
Differential gain:<0.2% at 4.43MHz
Differential phase:<0.4 degrees at 4.43MHz
Signal to Noise ratio:Better than 58dB (Luminance Weighting)
Better than 69dB (PAL System I Colour weighting)

Audio

System:Analogue base-band
Input signal level:5V p-p maximum
Input:MLT/R-50010k , RCA (phono)
MLT/R-500BE10k , XLR
MLT/R-500BT2k4 , XLR
Output:MLT/R-500100 , RCA (phono)
MLT/R-500BE100 , XLR
MLT/R-500BT600 , XLR
Bandwidth:MLT/R-500 and MLT/R-500BE-3dB 10kHz to 100kHz
MLT/R-500BT-3dB 30kHz to 35kHz
Signal to Noise ratio:Better than 80dB (10kHz LPF)

General

Controls/indications:Video gain, video HF equalisation, power
Powering:+12 to 16VDC at approx 140mA per end, 2.5mm circular (centre positive)
Dimensions:175(l) × 80(w) × 30(h)mm (MLT/R-500 and MLT/R502)
175(l) × 80(w) × 60(h)mm (MLT/R-500BE and MLT/R500BT)
Weight:220g (MLT/R-500)
320g (MLT/R-500BE)
430g (MLT/R-500BT)
230g (MLT/R-502)

Ordering information

Pricing not available
This item is discontinued. Please contact Technical Support for advice on alternatives.

Ask a question

Please select the appropriate department from the dropdown list and enter your question providing as much relevant detail as possible.

(Fields marked * are required)

  1. UK Sales

    1. 08.30 - 17.30 UK time
    2. Tel: +44 (0) 191 418 1122
    3. Fax: +44 (0) 191 418 1123
    4. sales@canford.co.uk
  2. International Sales

    1. 08.00 - 17.30 UK time
    2. Tel: +44 (0) 191 418 1133
    3. Fax: +44 (0) 191 418 1134
    4. international@canford.co.uk
  3. Technical Support

    1. 09.00 - 17.30 UK time
    2. Tel: +44 (0) 191 418 1144
    3. Fax: +44 (0) 191 418 1145
    4. techsupport@canford.co.uk