Description
GORGY CLOCKS AND TIMECODE DISPLAYS
Independent Quartz Clocks
A range of elegant display clocks manufactured in France by Gorgy Timing. As standard, these are all available as independent quartz controlled units, not requiring a control master clock, accuracy ±0.2 sec per day.
All clocks and displays (except LEDI Green) are supplied as standard with high intensity red LED displays; green or yellow displays are available to special order at extra cost. Green is standard for LEDI Green. Cases are black as standard, but also available in blue, green, white, yellow, grey, anodised gold, red or chromium to special order at extra charge. All operate from 220/240 volts 50/60Hz supply, and incorporate NiMh batteries giving over 48 hours operation in the event of mains failure.
LEDI 6/S
Hours and minutes 7 segment display, 4 red LED’s per segment, with character height 70mm (legible to 25 metres), and seconds display with 50mm character height (legible to 20 metres). Push button time setting. Black lacquered metal case, 405 × 145 × 67mm.
LEDI 6/60S
Hours and minutes 7 segment display, 4 red LED’s per segment, with character height 70mm (legible to 25 metres). Seconds display with 50mm numerical character height (legible to 20 metres) and also by 60 circumferential LED’s, illuminating in accumulating sequence till whole minute, then extinguishing and recommencing cycle. Black lacquered metal case, 365 × 365 × 67mm.
LEDI 1/60
As LEDI 6/60S model, but miniature version and without numerical seconds display. Hours and minutes 7 segment display, character height 18mm. Display of seconds by a circle of 60 circumferential LED’s, diameter 80mm. Brightness adjustment. Available in two case versions. Surface mount version is 115 × 115 × 40mm. Recessed version has anodised 2.8mm alloy front plate 160 × 132mm, cutout 124 × 108mm, depth behind panel 40mm.
LEDI 1/60S
As LEDI 1/60, but with a numerical seconds display (8mm characters) in addition to the circumferential seconds display. Available in surface mount version is 115 × 115 × 40mm. Recessed version has anodised 2.8mm alloy front plate 160 (w) × 132 (h) mm, cutout 124 × 108mm, depth behind panel 40mm.
LEDICA 6/M
The previous LEDICA 6/M has been replaced by the current LEDICA 6/M, with date and month in 50mm LED characters and hours and minutes in 70mm characters. Legible up to 25m. Gloss-painted ultra-flat aluminium case 660 × 145 × 67mm.
SMPTE/EBU Timecode Slave Clocks and Timecode Displays
All these models are physically indentical to the Quartz Clock versions detailed above, with the same size and format displays, but are slave clocks driven from an external SMPTE/EBU timecode source (for example, where this is distributed around a building as a master time reference). All models display hours, minutes and seconds only, but two models, LEDI6/60S and LEDI1/60S, are available to special order displaying timecode frame numbers also.
LEDI 6/S
Hours, minutes and second display.
LEDI 6/60
Hours, minutes display, with circumferential LED display for seconds. Black lacquered metal case, 365 × 365 × 67mm.
LEDI 6/60S
Hours, minutes display, with circumferential LED display for seconds. Frame number (special order version only) is displayed in 50mm characters.
LEDI 4/60
Hours, minutes display, with circumferential LED display for seconds. Black lacquered metal case, 220 × 220 × 67mm.
LEDI 1/60
Hours, minutes display, with circumferential LED display for seconds.
LEDI 1/60S
Hours, minutes display, with circumferential LED display for seconds. Frame number (special order version only) is displayed in 8mm characters.
Options
To special order, most clocks and timecode displays can be supplied with RS232C and/or RS422-485 input/outputs, DCF (Germany) or TDF (France) radiocode synchronisation (MSF UK not available), count up/down timers, temperature (displayed alternately with time) and pips on the hour. They are also available as slave clocks operating either on the IRIG B (AFNOR NFS 87500) code, or 24 volt parallel polarised minute impulses.