A range of gooseneck light fittings, operating from 12V AC or DC, with 5W high intensity (quartz-halogen) bulbs or an LED version for shockproof, cool-running, near perfect colour balance, plus a variety of fixing options. These units will provide the ideal solution for localised illumination in theatres, studios, TV galleries, on mixers turntables etc. They have a slot in the lamp housing to accommodate colour filters. LED versions offer a red-LED operational mode for night-vision work. All halogen units are supplied inclusive of bulb. Power supplies are not included as standard (suffix A denotes no supply) but these are available separately. Lamps draw 300mA. LED version draws up to 100 mA. L, RL and P types have a 300mm cable with 2.1mm coaxial in-line inlet connector. On XLR types, pin 1 zero volts is not isolated from the connector shell.
L-3 series
High intensity quartz halogen lamp on 300mm or 450mm gooseneck (denoted by /12 or /18 suffix) permanently mounted on base unit which includes dimmer (with “off” position) and 300mm cable.
LnnA-LED
As L-3 series but using LED illumination and without dimmer.
L-7 series
As L-3, but gooseneck exits from the end of the base (on L-3 it exists from the top of the base).
RL series
High intensity quartz halogen lamps on 300mm gooseneck permanently mounted on 1U 19 inch recessed rack panel, including dimmer. Goosenecks lie flat along recessed panel for storage, so can be used on racks with doors and in flightcases with lids. RL-10-SA is single gooseneck, RL-10-DA is dual gooseneck type.
P-HI series
High intensity quartz halogen lamp on 300mm or 450mm gooseneck (denoted by 12 or 18 prefix), 3/8 inch threaded end. For use where permanently mounted units are required, fits panels up to 3.2mm thickness. (For greater panel thickness use accessory MP mounting plate).
P-LED
As P-HI series but using LED illumination and without dimmer.
G-HI series
As P-HI series, but BNC connector at base for where plug-in detachable units are required.
G-LED
As G-HI series but using LED illumination and without dimmer.
X-HI series
As P-HI series, but XLR 3 pin male connector at base for where plug-in detachable units are required. Wired pin 2+ V, pin 1 0V, pin 3 N/C. This series also includes a 150mm long version, 6X-HI.
X-3-LED
As X-HI series but using LED illumination and without dimmer.
X-HI-4 series
As P-HI series, but XLR 4 pin male connector at base for where plug-in detachable units are required. Wired pin 4+ V, pin 1 0V, pins 2+ 3 N/C.
X-4-LED
As X-HI-4 series but using LED illumination and without dimmer.
XR-HI and XR-HI-4 series
As X-HI and X-HI-4 series, but right angle, XLR 3 pin, male connector, for use with consoles where the socket is mounted on the back panel, and the gooseneck stem must come up and then over console. Available in both 3 and 4 pin XLR version, both 12 inch and 18 inch lengths.
XR-LED
As XR-HI series but using LED illumination and without dimmer.
XR-4-LED
As XR-HI-4 series but using LED illumination and without dimmer.
DM Dimmer rheostat
Panel mounting, for varying the intensity of halogen lamps. Used in applications with P-HI, G-HI, X-HI or XR-HI series goosenecks where dimming is required. 2 goosenecks maximum per dimmer. Fits panels up to 3.2mm thickness (for greater panel thickness use accessory MP mounting plate), supplied complete with fixing nut and knob. NB: Has no “off” position. Rated 10W.
CL Clip mount
For attaching L series units to a vertical panel or lip-e.g. music stands, console end-cheeks etc. Adjusts to clamp over material from 1.6 to 18mm thickness. Includes mounting bracket, spring plate and screws.
SM Snap mount
Used wherever a quick easy placement and removal of L series units is needed. Consists of two self-adhesive backed pads, one for base of Littlite, the other for the mounting surface. The two pads interlock when pressed together to form a secure but easily detachable mounting.
CWB Weighted base
Used where a moveable unit is required. A cast metal plate fits over the L series bases, making the lamp freestanding.
MB Magnetic base
Fixes permanently onto base of L series lamps, to allow magentic attachment to steel surfaces.
MP Mounting plate
44.0mm square metal plate with 9.5mm diameter hole in the centre. Used to mount P series goosenecks or DM dimmers on thicker panels.
HTC High tension clamp
Fastens lamps to surfaces up to 37mm thick.
CF Colour filters
Set of three colours - dark red, blue and clear - slide into lamp housing.
HIC High intensity conversion kit
High intensity lamp housing plus Q5 lamp, for conversion of now discontinued low intensity units to high intensity, or for replacement purposes.
LPS2-4 Power supplies
12VDC 1.5A power supplies suitable for use with all Littlite halogen and LED type lights. The outlet connection is a 2.1mm coaxial type, which connects directly to L, RL and P type Littlites (splitter cables are available for installations where more than one Littlite is to be powered from a single power supply). The housings have fixing lugs for easy mounting and are available with several AC power connections. LPS2-4-UK has a 1.8 metre cable with UK 3 pin 13A plug, LPS2-4-EU has a re-wireable Shuko plug.
Spare bulbs
Q5-quartz halogen high intensity; 1815-low intensity (for now discontinued P and G low-intensity series series).
Spare O-rings
Used to retain lamp cover onto lamp holder.