SONY SRP-X100 AUDIO MIXER
A 1U rack-mounting audio mixer with mono and stereo inputs, stereo main and record outputs, and mono sub-mix outputs. The SRP-X100 is intended for use as a PA mixer in small-scale halls, and in AV systems.
Six mono XLR and three stereo phono (RCA) inputs each have a single rotary level control and signal present LED indicator. Large rotary controls are provided for MASTER and SUB outputs and the master output also has a mono switch and a peak LED indicator. A mains on/off switch completes the straightforward front panel.
The rear panel has an overall 48V phantom power switch, six microphone-level mono inputs on XLR connectors and three stereo inputs on phono (RCA) connectors. Mono inputs 1 and 2 are dedicated microphone inputs while mono inputs 3,4 and 5,6 may be switched (on the rear-panel) in pairs to be mono microphone inputs or stereo line inputs. Microphone inputs are routed to the mono SUB output and line inputs to the stereo MASTER output. These outputs are normally combined but can be separated by a rear-panel switch. The MASTER output can be selected to MONO by a front panel switch. All outputs appear on the stereo REC output.
Technical Specification:
Frequency response: |
20-20,000Hz +0.5dB/-1.0dB, (master outputs) |
Input levels: |
|
Mono mic: |
-60dBu nominal, -30dBu maximum (>2,200 ohm) |
Mono line: |
+4dBu nominal, +24dBu maximum (>10k ohm) |
Stereo line: |
-10dBu nominal, +10dBu maximum (>47k ohm) |
Distortion: |
|
Stereo input: |
<0.005% THD at master output (1kHz, -10dBu input) |
Microphone input: |
<0.01% THD at master output (1kHz, -44dBu input) |
Signal to noise ratio: |
>90dB |
Crosstalk: |
<-80dB |
Power: |
120/230V AC 50/60Hz 19W (IEC mains input) |
Weight: |
2.6kg |
Dimensions: |
1U rack-mounting x 175mm deep (excluding connectors) |