www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £75
  • Industry leading
    customer service
  • Free technical support
    from our team of experts
28-334 SSE MLR-500BE CAT5 ADAPTER 1x video BNC, 1x audio XLR, balanced, receive This item is discontinued. Please contact Technical Support for advice on alternatives.

28-334

SSE MLR-500BE CAT5 ADAPTER 1x video BNC, 1x audio XLR, balanced, receive

Studio Systems Electronics MLR-500BE

SSE MLR-500BE CAT5 ADAPTER 1x video BNC, 1x audio XLR, balanced, receive

Image may be provided for illustrative purposes only, please refer to the product description.

STUDIO SYSTEMS ELECTRONICS MEDIALINK 500

The Medialink 500 series provides a cost-effective method of transmitting video and audio signals from point to point via a single twisted-pair Cat. 5 (Category 5) cable. This connects on each unit via a standard RJ-45 socket. Broadcast quality signal fidelity is maintained at distances of up to 350 metres. The four different models in the series offer options for full-duplex video and audio (balanced or unbalanced), and RGB/YPbPr or composite video signals. The video distribution is system independent and therefore works with PAL, NTSC or SECAM.

MLT-500/MLR-500

Supports audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The audio interface is unbalanced on RCA (phono), video on BNC.

MLT-500BE/MLR-500BE

Supports balanced audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The MLT-500BE /MLR-500BE are the same as the MLT-500/MLR-500 except that the audio interface is electronically balanced on XLR connectors.

MLT-500BT/MLR-500BT

Supports balanced audio and composite video in both directions using a single Cat. 5 twisted-pair cable. The MLT-500BT /MLR-500BT are the same as the MLT-500/MLR-500 except that the audio interface is transformer balanced on XLR connectors.

MLT-502/MLR-502

This system transmits up to 3 video signals in a single direction over a single Cat. 5 twisted-pair cable. These units are designed for composite video signals but can also be used to transmit 3 component signals (without audio). An additional feature is that power is not required at both ends for Cat. 5 cable lengths of up to 100 metres. For Cat. 5 cable lengths over 100 metres, DC power must be provided at both ends.

Technical Specification:

Video

System compatibility:PAL, NTSC, SECAM, R,G,B, Y,Pb,Pr, or Y/C.
Signal level:1V p-p into 75
Input/output impedance:75 , BNC connector
Frequency response:Within ± 0.5dB to 5.5MHz (up to 350m of Cat. 5 cable)
Bandwidth:-3dB at 8 MHZ (up to 350m of Cat. 5 cable)
Differential gain:<0.2% at 4.43MHz
Differential phase:<0.4 degrees at 4.43MHz
Signal to Noise ratio:Better than 58dB (Luminance Weighting)
Better than 69dB (PAL System I Colour weighting)

Audio

System:Analogue base-band
Input signal level:5V p-p maximum
Input:MLT/R-50010k , RCA (phono)
MLT/R-500BE10k , XLR
MLT/R-500BT2k4 , XLR
Output:MLT/R-500100 , RCA (phono)
MLT/R-500BE100 , XLR
MLT/R-500BT600 , XLR
Bandwidth:MLT/R-500 and MLT/R-500BE-3dB 10kHz to 100kHz
MLT/R-500BT-3dB 30kHz to 35kHz
Signal to Noise ratio:Better than 80dB (10kHz LPF)

General

Controls/indications:Video gain, video HF equalisation, power
Powering:+12 to 16VDC at approx 140mA per end, 2.5mm circular (centre positive)
Dimensions:175(l) × 80(w) × 30(h)mm (MLT/R-500 and MLT/R502)
175(l) × 80(w) × 60(h)mm (MLT/R-500BE and MLT/R500BT)
Weight:220g (MLT/R-500)
320g (MLT/R-500BE)
430g (MLT/R-500BT)
230g (MLT/R-502)
Request callback