www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £75
  • Industry leading
    customer service
  • Free technical support
    from our team of experts
76-0993 FBT AMICO 1000 PORTABLE SOUND SYSTEM Stereo, 5 channels, 900W, sub and satellites This item is no longer manufactured. Please contact Technical Support for advice on alternatives.

76-0993

FBT AMICO 1000 PORTABLE SOUND SYSTEM Stereo, 5 channels, 900W, sub and satellites

FBT AMICO 1000

FBT AMICO 1000 PORTABLE SOUND SYSTEM Stereo, 5 channels, 900W, sub and satellites
FBT AMICO 1000 PORTABLE SOUND SYSTEM Stereo, 5 channels, 900W, sub and satellitesFBT AMICO 1000 PORTABLE SOUND SYSTEM Stereo, 5 channels, 900W, sub and satellites

FBT AMICO PORTABLE SOUND SYSTEMS

This range of completely integrated, ready-wired sound systems offer a convenient plug and play solution for drama, education, conferences and small groups performing live in small to medium venues. Mixer, amplification and sub bass unit are presented in a single ultra light-weight enclosure of exceptional strength. Two models have storage for satellite speakers, so the wheeled system can be transported as one piece. Several models offer a choice of input channels and power outputs. All are powered by AC mains.

All models share the same main enclosure, with a speaker grille on the front. A cover, also acting as a towing handle, hinges off the top, to reveal a mixer set horizontally, with it’s connections facing to the rear. The rear cover detaches to allow access to a 1U storage slot for carrying accessories such as microphones or a CD player. Beneath this are two storage shelves into which satellite speakers, where included, press fit for storage, and at the bottom the power amplifier, with connectors facing to the rear; two NL4 speaker connectors for the satellite speakers and an IEC power inlet with associated fuse.

AMICO 400 - Mono, Single Unit, 350W

This is the entry model in the range; there is a one inch (25mm) compression driver with circular 60x60 degree horn fitted as well as the 15 inch (380mm) bass driver fitted to the other models. These are driven actively by the internal amplifiers, 300W and 50W (RMS) for low and high frequencies respectively. Active protection circuitry provides 'total component protection'.

The mixer has four channels. There are two microphone/line channels. The microphone input is a balanced XLR, with 24V phantom power switched globally, the line input uses a 6.35mm jack. Controls are: Volume, gain, pan, effects send, high, mid, low equalisation. Two stereo channels are each fed by two 6.35mm jacks, and have volume control only. The master section offers stereo CD/tape inputs and outputs on two pairs of RCA (phono) connectors; the inputs may be fed to the main mix with a button. A headphone output is provided with a 6.35mm stereo jack socket, and has a volume control The inbuilt digital effects processor offers 16 presets and a level control to the mix. The master level control feeds two mono 6.35mm jacks in addition to the feed to the power amplifiers via an amplifier volume control. A further jack is fitted for connection to a foot pedal, not included, to switch on and off the digital effects. Power source: 230V AC 50Hz 400VA. Dimensions 478 x 780 x 433 (w x h x d )mm. Weight 33kg.

Included accessories: User manual. Power cord, IEC, 5 metres.

Amico 500 - Stereo, 460W, Sub and Satellites

This model has more inputs, and is supplied with two satellite speakers; the main unit has a 15 inch (380mm) bass driver acting as a sub-woofer. There are three power amplifiers, with 300W and two 80W (RMS) channels for the sub and the two satellites respectively. These enhancements result in more headroom, reduced feedback and increased dispersion, all contributing to a larger coverage area. The satellite speakers are moulded from polypropylene and are fitted with 6.5 inch (165mm) low/mid drivers and 1 inch (25mm) compression drivers with constant directivity 90x60 degree horns. Connections are by NL4 style connectors. Again active protection circuitry provides 'total component protection'.

The mixer has five channel strips. There are two mono microphone/line channels. The microphone input is a balanced XLR, with 24V phantom power switched globally, the line input uses a 6.35mm jack. Controls are: Volume, mute, gain, pan, effects send, monitor send, high, mid, low equalisation. Three ‘stereo’ channels may be fed by a mono balanced XLR microphone input, or a stereo signal from two 6.35mm jacks. Controls are the same as the mono strips except the pan control becomes balance. Each strip has a peak level LED.

The master section offers stereo CD/tape inputs and outputs on two pairs of RCA (phono) connectors; the inputs may be fed to the main mix with a button and level control. A headphone output is provided with a 6.35mm stereo jack socket, and has a volume control. An effects send level control feeds a mono output jack, as well as the inbuilt digital effects processor which offers 256 presets. This is fed, via two 6.35mm break jacks for inserting external effects, to a level control to the mix and a level control to the monitor mix. The monitor master level control feeds a mono 6.35mm jack. The master level control feeds two mono 6.35mm jacks in addition to the feed to the power amplifiers via a balance, and 'Sub' volume control. Four LEDs form a stereo level display. A further jack is fitted for connection to a foot pedal, not included, to switch on and off the digital effects. Power source: 230V AC 50Hz 500VA. Dimensions: 478 x 780 x 433 (w x h x d)mm. Weight: 40kg.

Included accessories: User manual. Power cord, IEC, 5 metres. Two aluminum, telescopic speaker stands. Two speaker leads (speakon style), 10metres, contained in a separate carrying bag.

Amico 1000 - Stereo, 900W, Sub and Satellites

This is essentially a more powerful version of the Amico 500, with two extra channel strips and with 600W and two 150W (RMS) channels for the sub and the two satellites respectively resulting in 3dB extra sound pressure level. The mixer has seven channel strips, three mono microphone/line channels and four 'stereo' channels. Controls, connectors, features and accessories are as the Amico 500. Power source: 230V AC 50Hz 800VA. Weight: 41kg.

Request callback