These kits are used to make-up custom adapters between the increasingly popular RJ45 modular connector and the ubiquitous D-sub types, without soldering or crimp tooling. Clearly useful in networking…
The Ikon USB-ST screw terminal adapter brings the four USB contacts out to screw terminals with minimal signal loss, and is designed for panel mounting applications.
Panel-mounting recessed USB connectors, housed in a metal D-series size shell. The front of the connector insert is flush with the housing, to minimise risk of damage. The insert is an A-B adapter…
Dummy plugs for both A and B type USB sockets, incorporating a finger-grip, that can be used to protect unused ports from the ingress of dust and other contaminents. They may also make an elegant…
USB feedthrough connectors mounted in metal housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with connection panels, connection plates, wallboxes…
Panel-mounting recessed Firewire 400 (IEEE1394) connectors, housed in a metal D-series size shell. The front of the connector insert is flush with the housing, to minimise risk of damage. The insert…
Firewire 400 (IEEE1394) and Firewire 800 (IEEE1394B) feedthrough connectors mounted in metal housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with…
Panel-mounting recessed HDMI v1.3 connectors, housed in a metal D-series size shell. The front of the connector insert is flush with the housing, to minimise risk of damage. 19-pin standard HDMI…
These are used on the last lighting fixture on the circuit to terminate the DMX512 data signal. Available in 3-pin and 5-pin versions, male and female. They are housed in Neutrik XX series connector…
In-line adapters for DMX applications, with an RJ45 socket at one end, and XLR 5-pin male or female panel type connector at the other.
XLR 5-pin male and female panel connectors with adapter to provide an RJ45 socket at the rear. These are suitable for rear of panel mounting only, and require M3 mounting screws.
A range of ruggedized Cat5E connectors, using proven Neutrik style body-shells, cable clamping, and positive latching mechanisms. The panel connectors are integrated into the main Neutrik ranges…
A range of ruggedised Cat 6 RJ45 connectors, using proven, Neutrik style body-shells, cable clamping and secure ‘push-pull’ latching mechanisms. These fully shielded connectors are fully Cat6…
These hinged covers are suitable for all Neutrik D-series and Canford ‘Universal’ series connectors, and seal them, when unmated, from dust and water ingress to IP42. There is a recess on the cover…
A two-part rectangular profile extruded case which enables custom adapters to be assembled. It accepts any D-series connector from Neutrik or Canford at each end. The two sections interlock, and are…
Push-fit protective rubber covers to fit most Neutrik cable connectors, together with EtherCon and OpticalCon panel connectors. Covers for cable connectors are available with or without a looped…
These dust protection covers can be used in Neutrik D-series size panel connectors when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when…
These EPDM gaskets provide a dust and water resistant assembly for all D-shape panel connectors when mounted on the front face of panels. Overall dimensions 39.2mm x 34.2mm. Available in 6 different…
This fixing plate with M3 threads offers efficient and easy mounting of all D-sized panel connectors, without the need for nuts. It can be used with the connectors mounted front or rear of the panel…
These Category 6 compliant, screened patchcords are made using Cat6 FTP cable, and have Neutrik NE8MC-C6 Ethercon Cat6 connectors at each end. These handle data rates up to 10Gbit/s, and have…
RJ11 and RJ45 are crimp connectors widely used in telecoms and data applications. RJ11 are available in 4-pole and 6-pole body sizes, RJ45 are 8-pole. RJ11 6-pole are available with 4 or 6 contacts…
A ratchet type tool for crimping RJ45 type connectors. Two die sets are available, one is for Cat5E type plugs, the other suits Cat5E and Cat6 plugs. The tool is supplied without die sets, which…
Moulded strain relief boots with latch cover suitable for use with most RJ45 connectors. Nominal internal diameter 5.5mm (suits cables up to 6.0mm) and 6.0mm (suits cables up to 6.4mm). For Cat5E…
Bel Stewart are one of the leading manufacturers of precision RJ45 connectors. The versions stocked are suitable for use with most of the types of Category cables available as bulk cable, with either…
Ratchet type crimp tools suitable for both the Bel Stewart and generic RJ45 and RJ11 plugs supplied by Canford. They all have a full cycling, parallel action, ratchet crimp action with manual…
Claimed by the manufacturer to be ‘the world’s easiest terminating RJ45 plugs’, these simplify twisted-pair terminations by allowing the wires to be inserted through the connectors and out of the…
RJ45 to RJ45 Cat5E and Cat6 in-line female-female couplers. Available either fully shielded or unshielded. An invaluable product in many situations, for example, extension of equipment, patch and…
RJ45 feedthrough connectors mounted in plastic housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with connection panels, connection plates, wallboxes…
A range of faceplates and snap-in modules providing Cat5E and Cat6 RJ45 outlets. Connector modules are 50mm x 25mm. Blank modules are 50mm x 25mm or 50mm x 12.5mm, the latter enabling a single…
This range of plastic, surface-mounting back boxes is suitable for a wide range of applications. Manufactured from ABS, they are much less brittle than traditional electrical back boxes and so less…
Plug-in two-way ‘Tee’ adapter, with two RJ45 sockets and one plug.
Enables an additional signal to be transmitted down the two unused pairs of Category 5 twisted-pair cable. This allows expansion of an existing system without the need to disrupt the cable…
A travel adapter that interfaces between the RJ11 computer modem output connector and the eight most significant phone line connectors in use in Europe. Located on one end of the unit is a snap-fit…
A range of three line-adapters allowing telephone equipment to be connected to RJ45 structured wiring systems. All units comply with OFTEL approval NS/G/23/L/1090005 & BS6312. These have a male…
The 431A plug is 4 pole, and fits all sockets. Suitable cable is CW1311 4 core, ‘D’ shaped. Extension cables are also stocked, 431A plug to 431A type socket, 5 metres.
A range of traditional “Christmas tree” terminal blocks. Both types have rectangular holes in base (5mm x 20mm) and are mounted using two tapped holes in the base. TypeNo. ofNo. ofBase…
Please select from the list of categories above
3 Products