www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

RODE MICROPHONES - Miniature lavalier, clip-on, pin-mount

This selection of Rode miniature lavalier (tie-clip) microphones have been designed to provide broadcast quality audio in a variety of situations including studio and location work.

The mics, with omni-directional condenser capsules, can be connected to a variety of branded wireless systems, cameras, and portable recorders by using the applicable MiCon connector.

Lavalier - Condenser, omni-directional, MiCon connection

The 'Lavalier' is a 2.54mm omni-directional condenser capsule housed in a black casing designed for film, television, and house of worship use. A frequency response of 60Hz - 18kHz and the included mini-furry windshield help retain voice nuances in adverse conditions.

The 1.2 metre black Kevlar reinforced detachable cable has a sub-miniature screw to connect to any one of the MiCon series connectors. Connectors are not included and should be ordered separately, see below.

Capsule size: 2.54mm. Frequency range: 60Hz to 18kHz. Output impedance: 3000ohms. Maximum SPL: 110dB. Sensitivity: -33.5dB. Weight 1g. Dimensions: 12 x 4.5 x 4.5mm (h x w x d).

Included accessories: Minifur-Lav artificial fur windshield, Lav-Clip mounting clip, WS-Lav pop filter, Anti-Trauma case, and spanner.

Pinmic - Condenser, omni-directional - Up to 1.5mm fabric

This has many of the characteristics of the 'Lavalier' microphone, including the 2.54mm omni-directional condenser capsule and the 60Hz - 18kHz frequency response. The 9mm deep, and 11mm diameter capsule head comes with a black housing that can be switched for an included paintable silver mesh. A pin-through design where the microphone's back plate is hidden behind the fabric, makes it easier to conceal than a lapel style microphone. Mounts through fabric up to 1.5mm thick. 'DeadMouse-Pin' fur windshield reduces unwanted noise caused by wind and adverse conditions.

The 1.2 metre black Kevlar reinforced cable has a sub-miniature screw to connect to any one of the MiCon series connectors. Connectors are not included and should be ordered separately, see below.

Capsule size: 2.54mm. Frequency range: 60Hz to 18kHz. Output impedance: 3000ohms. Maximum SPL: 110dB. Maximum output level: 189.0mV. Sensitivity: -33.5dB. Weight 10g. Dimensions: 16 x 22 x 33mm (h x w x d).

Included accessories: Clip1 MiCon cable clip, 1x unpainted mesh head, Anti-Trauma case, tool kit, DeadMouse-Pin fur windshield.

Pinmic Long - Condenser, omni-directional - Up to 3.5mm fabric.

Has all the characteristics of the PinMic, however it has a longer pin and therefore it is suitable for thicker fabrics up to 3.5mm thick.

Specifications and accessories are as for the Pinmic above.

Micon Extension Cables - For Lavalier, PinMic, or PinMic Long

Made with Kevlar-reinforced cable to extend the reach of the captive cable of the Lavalier, PinMic, or PinMic Long microphones. these are terminated with MiCon-compatible, sub-miniature screw and socket connectors, 1.5mm in diameter. They are offered in 1.2 and 3 metre lengths and various colours.

Micon-1 Connector - Jack, 3.5mm, 3-pole with locking ring - Sennheiser transmitter

An optional adapter to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to a Sennheiser wireless transmitter with locking 3.5mm TRS jack socket. Dimensions: 39 x 10 x 10mm (h x w x d). Weight: 10g.

Micon-2 Connector - Jack, 3.5mm, 3-pole - Stereo devices

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to a standard 3.5mm TRS jack with a power supply of 1V minimum. Dimensions: 37 x 10 x 10mm (h x w x d). weight: 8g.

Micon-3 Connector - TA4F, 4-pin mini (XLR) - Shure transmitter

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to select Shure transmitters with TA4F four-pin mini connector. Dimensions: 36 x 13.65 x 10.4mm (h x w x d). Weight: 10g.

Micon-4 Connector - 4-pin female with locking ring - Audio Technica Transmitter

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to an Audio Technica UniPak body-pack wireless transmitter with a locking 4-pin female connector. Dimensions: 36 x 11.6 x 11.6mm (h x w x d). Weight: 13g.

Micon-5 Connector - XLR, 3-pin, male - Standard microphone input

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to a standard, 3-pin XLR, female input with phantom power. Dimensions: 61.8 x 30.1 x 21mm (h x w x d). Weight: 50g.

Micon-8 Connector - Jack, 3.5mm, 3-pole with locking ring - Sony Transmitter

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to a Sony UWP transmitter with a locking 3.5mm jack. Dimensions: 39 x 10 x 10mm (h x w x d). Weight: 10g.

Micon-11 Connector - Jack, 3.5mm TTRS - Smart phones

An optional connector designed to connect the Rode HS1 headset and Lavalier, PinMic, or PinMic Long microphones to a device with 3.5mm TTRS jack socket such as an iPhone, iPad, and select Android devices. Dimensions: 1200 x 9 x 9mm (h x w x d). Weight: 7g.

Minifur-Lav - Microphone Cover - For Lavalier or smartLav+ microphone in a high wind.

Designed to give the lapel microphone protection from windy conditions when on location the Minifur-Lav is manufactured from synthetic fur and compatible with the Rode Lavalier, smartLav and smartLav plus, a handy accessory for outdoor use. Supplied in pack of three. Dimensions: 26 x 44 x 44mm (h x w x d). Weight: 1g.

Invisilav - Microphone Cover - For Lavalier or smartLav - Discreet, skin-safe adhesive.

InvisiLav has been designed to help the user conceal the positioning of their Lavalier or smartLav microphone by allowing adhesion to skin or fabric. Two mounting points allow for a redundant microphone if required, and the soft, medical grade, skin safe, material absorbs noise and vibration giving a cleaner audio signal. Supplied in packs of three or ten. Dimensions: 18 x 25 x 6mm (h x w x d). Weight: 5g.

  Description Price (£) Add to basket
RODE LAVALIER MICROPHONE Lapel, condenser, omni-directional, MiCon connection   Stock code:
Please login for stock availability and lead times.
£155.30
RODE PINMIC MICROPHONE Lapel, condenser, omni-directional, 1.5mm   Stock code:
Please login for stock availability and lead times.
£155.30
RODE PINMIC LONG MICROPHONE Lapel, condenser, omni-directional, 3.5mm   Stock code:
Please login for stock availability and lead times.
£155.30
RODE MICON CABLE Extension, for Lavalier, PinMic, or PinMic Long, 1.2metre, black Black Stock code:
Please login for stock availability and lead times.
£28.55
RODE MICON CABLE Extension, for Lavalier, PinMic, or PinMic Long, 1.2metre, pink Pink Stock code:
Please login for stock availability and lead times.
£26.44
RODE MICON CABLE Extension, for Lavalier, PinMic, or PinMic Long, 3m, black Black Stock code:
Please login for stock availability and lead times.
£33.58
RODE MICON-1 CONNECTOR For Lavalier, PinMic, or PinMic Long, locking TRS jack, for Sennheiser Tx   Stock code:
Please login for stock availability and lead times.
£12.59
RODE MICON-2 CONNECTOR For Lavalier, PinMic, or PinMic Long, 3.5mm TRS jack, for stereo devices   Stock code:
Please login for stock availability and lead times.
£14.27
RODE MICON-3 CONNECTOR For Lavalier, PinMic, or PinMic Long, TA4F 4-pin mini connector, for Shure Tx   Stock code:
Please login for stock availability and lead times.
£15.94
RODE MICON-4 CONNECTOR For Lavalier, PinMic, or PinMic Long, 4-pin connector, for Audio Technica Tx   Stock code:
Please login for stock availability and lead times.
£21.82
RODE MICON-5 CONNECTOR For Lavalier, PinMic, or PinMic Long, 3-pin XLRM plug   Stock code:
Please login for stock availability and lead times.
£21.82
RODE MICON-8 CONNECTOR For Lavalier, PinMic, or PinMic Long, locking 3.5mm TRS jack, for Sony Tx   Stock code:
Please login for stock availability and lead times.
£12.59
RODE MICON-11 CONNECTOR For Lavalier, PinMic, or PinMic Long, 3.5mm TTRS jack, for smartphones   Stock code:
Please login for stock availability and lead times.
£16.36
RODE MINIFUR-LAV MICROPHONE COVER High wind, for Lavalier or smartLav microphone   Stock code:
Please login for stock availability and lead times.
£12.59
RODE INVISILAV MICROPHONE COVER, Discreet, skinsafe adhesive, for Lavalier or smartLav, 10-pack   Stock code:
Please login for stock availability and lead times.
£35.26
RODE INVISILAV MICROPHONE COVER, Discreet, skinsafe adhesive, for Lavalier or smartLav, 3-pack   Stock code:
Please login for stock availability and lead times.
£14.27
Request callback