CANFORD RACKS - Plinths, floor fixing kits, castors and levelling feet - For ES362 Series
Plinths, floor fixing brackets, castors and levelling feet for use with Canford ES362 Series cabinets
Used to space the cabinet off the floor by 100mm, allowing access for cables through a brushed aperture at the rear, into the base of the cabinet when the cabinet is on a solid floor.
Floor Fixing Brackets
A set of two brackets, used front and back are positioned under the bottom frame of the rack and fixed from the inside, and can then be attached to the floor. Recommended with taller racks with heavy loads. Note that castors cannot be used when brackets are fitted to a rack.
A set of four castors, 2x braked, 2x un-braked, are fastened to an adapter plate which, in turn is bolted to the base of the rack. Fasteners included. Maximum load per set of four: 600kg. Note that castors cannot be used when floor fixing brackets or levelling feet are fitted to a rack.
PVC feet on threaded steel studs, to screw in the base of racks. Thread: 10mm. Maximum loading per set of four: 600kg, subject to load capability of flooring. Note that castors and levelling feet cannot be used together.