COVID-19: Canford remains open for business and web orders are being processed normally. Please see our Coronavirus statement for the latest updates.

UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

GLENSOUND DANTE NETWORK INTERFACES - AoIP Series

This range of Glensound AES3 interfaces have been designed for use in outside broadcast, theatre, and location applications, where interfacing between AES3 and Dante/AES67 is required.

AoIP22 – 2-channel, bi-directional

AoI22 is an analogue to digital and digital to analogue converter designed to connect line level analogue audio circuits to a Dante audio network.

AoIP22 provides two, 0dB analogue line level inputs to the Dante network and 2 analogue line level outputs from the Dante network. These circuits are electronically balanced on XLRs but can be wired unbalanced. AES67 is supported by the Audinate’s Ulitimo chipset and can be easily turned on/off via the Dante controller.

The front facing panel of the AoIP22 has 2 balanced analogue 3-pin XLR outputs that provide outputs from the Dante/AES67 network. The outputs are electronically balanced and set to a line level whereby full scale (0dBFs) on the digital network equates to an analogue output of +18dBu. There are also 2 balanced analogue 3-pin XLR inputs that provide inputs to the Dante/AES67 network. They are electronically balanced but can be wired unbalanced. They are set such that an analogue input of +18dBu equates to full scale (0dBFs) on the digital network.

The right side panel of the AoIP22 has a link status LED that flashes to show when data is being correctly communicated with the attached switch. One Ethercon connector can mate with Neutrik XLR based network cables and standard RJ45’s. This should be connected to a PoE enabled switch or to a normal network switch via a Mid Span PoE injector. It is a 100Mb connection.

The left side panel of the AoIP22 shows a recessed reset button that’s main function is to allow the firmware within the AoIP22 to be updated. The micro-USB connector is used for connecting the AoIP22 to a PC when updating its firmware.

Audio: Input type: Electronically balanced (can be wired unbalanced) Neutrik 3-pin XLR socket. Input impedance: greater than 20k. Output impedance: 50 ohms. Output type: Electronically balanced (can be wired unbalanced) Neutrik 3 pin XLR plug. Max input before clip: +18dBu, Max output: +18dbu. Frequency response: 20Hz to 22kHz less than or equal to +/-0.25dB. Noise: -92dBu (residual). THD+N analogue in to network out: Relative (1k +18dBu): 0.00134%. THD+N Dante in to analogue out: Relative (1k +18dBu): 0.0026%. Dynamic range: 108dB's. Crosstalk (0dBu input to output 1k tone): -135dB. Digital full scale: +18dBu = 0dBFs.

Network audio: Compatible audio networks: Dante uncompressed, low latency audio & AES67. AES67 Compliant: The Audinate Ultimo chipset used in this product is AES67 compliant. Network connection: Neutrik RJ45 EtherCON. Dante network resolution: 24bit. Dante network sample rate: 44.1/48/88.2 & 96kS/s. AES67 network sample rate: 48kHz.

Power: Can be powered by PoE. Consumption: 2.6W. Dimensions (WxDxH): 153 x 105 x 41mm. Weight: 420g. Mechanics: All aluminium construction, anodized and laser etched

Included Items: Handbook (download also available), 2m Cat5 RJ45 plug to RJ45 plug cable, and belt clip.

AoIP22 AES3 – AES3 interface for Dante/AES67

AoIP22 AES3 is designed to easily and quickly interface existing AES3 equipment to a Dante/AES67 network audio system, providing one balanced AES3 audio circuit on and off the Dante/AES67 audio network. PoE ensures that only a single cable needs to be connected to the network to carry both audio and power. AES output is synchronised to the network audio sample rate and as such the clock follows the Dante/AES67 circuits.

The front facing panel of the AoIP22 has one 3-pin XLR input that can accept sample frequencies from 32 to 192kHz, and the AES3 output can support sample rates up to 96kHz. AES3 transformers provide isolation of the audio inputs. The front panel also features a single 3-pin XLR output.

On the rear of the AoIP22 AES3 there is a recessed reset button that enables the firmware within the AoIP22 AES3 to be updated via a micro-USB connector. Firmware can be updated using a compatible PC. The right side panel of the AoIP22 AES3 has a link status LED that flashes to show when data is being correctly communicated with the attached switch. The left side of the AoIP22 has one Ethercon connector that can mate with Neutrik XLR based network cables and standard RJ45s. This 100Mb connection should be connected to a PoE enabled switch or to a normal network switch via a Mid Span PoE injector.

The four front corners of the AoIP22 AES3 have ‘large strong’ holes that can be utilised for threading cable ties through for security when making temporary installations.

Audio: Frequency response: Flat to 22kHz. Maximum input before clip: 0dBFs. Maximum output level: 0dBFs. Input impedance: 110ohms. Output impedance: 110ohms. Distortion: 0.00006%, THD+N at 1kHz, reference to +18dBu output. Input type: Transformer balanced on Neutrik 3-pin XLR socket. Noise: greater than-123dBu, residual. Dynamic range: 141dBs. Input frequency: 32 to 192kHz. Output frequency: 44.1/48/88.2/96kHz, locked to Dante.

Network audio: Compatible audio networks: Dante uncompressed, low latency audio. AES67 network connection: Neutrik RJ45 EtherCON. Dante network sample rate: 44.1/48/88.2/96/192k. AES67 network sample rate: 48k.

Power: PoE: 1.2W. Source: PoE enabled switch or mid-span PoE Injection. Dimensions (WxDxH): 153 x 105 x 41mm, excluding belt-clip. Weight: 405g. Mechanics: All aluminium construction, anodized and laser etched.

Included items: Handbook (download also available), 2m Cat5 Rj45 plug/Rj45 plug cable, fitted belt-clip

AoIP44 AES3 – AES3 interface for Dante/AES67

Like the AoIP22 AES3, AoIP44 AES3 is designed to easily and quickly interface existing AES3 equipment to a Dante/AES67 network audio system. PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation. AoIP44 AES3 provides 2 balanced AES3 audio circuit on and off the Dante/AES67 audio network.

The front facing panel of the AoIP44 AES3 has two 3-pin XLR inputs that can accept sample frequencies from 32 to 192kHz. When operating a single AES3 output the AoIP44 AES3 can support sampling up to 96kHz; when operating two AES3 outputs the AoIP44 AES3 can support sampling up to 48kHz. The Front panel also houses two 3-pin XLR outputs. The AES outputs are synchronised to the network audio sample rate and as such the clock follows the Dante/AES67 circuits.

The rear facing panel of the AoIP44 AES3 a recessed reset button allows the firmware within the AoIP44 AES3 to be updated. Firmware can be updated via the micro-USB connector and connecting to a compatible PC.

The right side panel of the AoIP44 AES3 two link status LEDs that flashes to show when data is being correctly communicated with the attached switch. The left side of the AoIP44 AES3 one, 100Mb Ethercon connector can mate with Neutrik XLR based network cables and standard RJ45’s. This should be connected to a PoE enabled switch or to a normal network switch via a Mid Span PoE injector.

All four front corners of the AoIP44 AES3 feature large holes that are ideal for threading cable ties through for security.

Audio: Frequency response: Flat to 22kHz. Maximum input before clip: 0dBFs. Maximum output level: 0dBFs. Input impedance: 110ohms. Output impedance: 110ohms. Distortion: 0.00006%. THD+N at 1kHz reference to +18dBu output. Input type: Transformer balanced on Neutrik 3-pin XLR socket. Noise: greater than -123dBu, residual. Dynamic range: 141dBs. Input frequency: 32 to 192kHz. Output frequency: 44.1/48/88.2/96kHz, 1 x AES3 channel driven; 44.1/48kHz, 2 x AES3 driven, locked to Dante. Power: PoE: 1.2W. Source: PoE Enabled switch or mid-span PoE Injection.

Network audio: Compatible audio networks: Dante uncompressed, low latency audio. AES67 network connection: Neutrik RJ45 EtherCON. Dante network sample rate: 44.1/48/88.2/96/192k. AES67 network sample rate: 48k. Dimensions (WxDxH): 153 x 105 x 41mm, excluding belt-clip. Weight: 420g. Mechanics: All aluminium construction, anodized and laser etched.

Included Items: Handbook (download also available), 2m Cat5 Rj45 plug/Rj45 plug cable, fitted belt-clip

  Description Price £
ex. VAT
Add to basket
Show carriage
GLENSOUND AOIP22 AUDIO INTERFACE Bi-directional, 2-channel, Dante enabled   Stock code: 95-9001
Please login for stock availability and lead times.
£200.00
GLENSOUND AOIP22 AES3 AUDIO INTERFACE 1-input, AES3 to Dante/AES67, PoE   Stock code: 95-9002
Please login for stock availability and lead times.
£175.00
GLENSOUND AOIP44 AES3 AUDIO INTERFACE 2-input, AES3 to Dante/AES67, PoE   Stock code: 95-9003
Please login for stock availability and lead times.
£225.00