INTER-M PA MIXER-AMPLIFIERS
A budget range of units with a wide range of applications in industrial, commercial and recreational installations. All units carry a 5 year parts guarantee.
The PA60A amplfier provides 60watt into 4ohm, 40watt into 8ohm, or 60watt into 70/100V line output. The amp has 6 inputs including 5x balanced mic (-70dBu) or line level (-20dBu), and 1x twin phono (RCA), -20dBu (2kohm) input. A telephone system input (paging output from phone system (not BT line), 0dBu (10kohm)). Vox priority override is on mic 1-2 and telephone inputs. Additionally there is a MIX out (0dBu, 10kohm); EXT in (0dBu, 20 kohm, balanced) all on 3-pin euroblock connectors. Overall bass (100 Hz) and treble (10 kHz) tone controls plus master volume control, loudspeaker zone selection (5 zone and “all-call”) on 100 volt outputs, built-in chime and siren tones (manual (or for chime, remote via rear euroblock operation)) and an external mute facility (rear on euroblock) to mute inputs 3 to 6 is also featured. 230V AC powering IEC inlet. Weight; 6.25kg. Dimensions; 420 x 88 x 318.7(mm).
PAM-120A Mixer-Amplifier (with optional CD/MP3/FM Tuner)
Designed for shop, bar, church, factory and general applications, they feature individual phantom power switching and 3 band equalisation on each of 6 universal balanced mic or line inputs with XLR connectors. These together with the channel gain controls have been located on the rear of the unit, away from the eyes of the phantom knob twiddler. The front panel has only channel and master level plus bass and treble controls, with switches for power, chime and zone control. Inputs 1 and 2 have vox priority over the remaining inputs individually defeatable on the rear panel, an additional 0dB input has priority over all the other inputs (this input has no level control and is accessed by screw terminals on the rear panel). A CD/MP3 player and FM tuner module, PAM-MPM4, is available, which fits into the right slot on the front panel. It offers playback from CD or USB, allows transfer of CD or USB to its internal 2GB playback memory, as well as offering the output from an FM tuner. CD-DA, MP3 or WMA filetype playback featured.
Built in chime module for local or remote operation. Phantom power: 24V, for use only with microphones which are intended for use at this voltage. Input sensitivity: Variable, 1mV, 10kohms. Low level output: 1V, low impedance, for driving loop amplifiers or similar purposes. Loudspeaker zone selector: Five zone plus all-call (100V/70V outputs only). Output: 120W RMS, 100V/70V and 4ohms.
The unit is 19” rackmountable with the supplied kit. Powering 230V AC and 24V DC, IEC inlet, lead supplied, no plug. Dimensions 420(w) ×132(h) ×360(d)mm. Weight PAM-120 13.5kg.
PAM-340A Mixer-Amplifier (with optional CD/MP3/FM Tuner)
The PAM-340A is identical to the PAM-120A in most respects, the pre-amplifier section and entertainment modules being the same. Power output is 340 watts into a 100 V/ 70V line only. The inclusion of relays in the zone control section means it is possible to utilize an optional dedicated zone microphone console (RM-05A) to address the five zones either separately or in any combination. Rack-mountable with the kit supplied. Power: 230V AC only, IEC inlet, lead supplied, no plug. Dimensions: 420mm (w) x 132(h) x 360mm(d). Weight:11kg
RM-05A Remote Five-Zone Microphone
Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.
Please note: Inter-M were previously known as Inkel PA.