This D'n'A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene).
A low fire hazard, low smoke zero halogen version of FST-M, for use where space is at a premium.
||25/0.1mm (0.20mm sq.) bare copper
||Foamed polypropylene, 1.46mm O.D., red, black
||Two cores twisted together with 25/0.1mm bare copper drain wire
||Aluminium/polyester foil tape, bonded to jacket
||LFH compound, O.D. 3.7mm (wall thickness 0.3mm), black, printed with metre markings
||41pF/metre core to core, 85pF/metre core to core +screen (+/- 5pF/metre)
||Available in any multiple of 1 metre
‘FST’ and ‘LFH’ are registered trademarks of Canford Audio Limited.