CANFORD MICROPHONE CABLES, FOR CAMERAS
These pre-wired cables are for use with most camera microphone inputs. They have a black XLR 3-pin female for the microphone connection and a 3.5mm 3-pole jack plug, straight or right-angle, for the camera connection.
Tip and ring on the jack plug (left and right channels) are wired to pin 2 (signal) on the XLR. Sleeve on the jack plug (ground) is wired to pins 3 and 1 on the XLR.
The cable length is defined as the length of visible cable, measured from the end of the connector strain reliefs.