CANFORD RACKS - ES466 Series - Wall cabinets - IP66

Datasheet Print/PDF

Ask a question

Designed for use in open areas subject to the full force of the elements or harsh environments such as chemical and pharmaceutical plants or marine applications, offering sealing up to IP66, the ES466 Series are wall-mounting 19 inch rack and half-rack (9.5 inch), steel rack cabinets. Available in three heights, three depths and three finishes, they are supplied with a fitted steel front door, complete with gasket.

Cabinets with a lesser degree (IP 55) of sealing are also available, see LANDE RACKS - ES455 Series - 19 Inch wall cabinets - IP55.

The main cabinet is a welded, folded steel construction, using up to 1.5mm sheet depending on the model. The enclosure edge is folded in the shape of a channel to avoid water stagnating on the seal. The rear panel is sealed other than the four depressed fixing points for mounting the unit on the wall.

Folded, plated, steel, rack-mounting profiles are fitted, from the rear of the cabinet, using four M8 press-welded studs and recessed either 50mm or 100mm from the front of the cabinet depending on the model. These profiles have one set of perforations to take cage nuts to fix equipment across the front of the rack. Note that rear rack-mounting profiles are not supplied with this range of cabinets.

A surface-mounted, lockable, steel door is secured to the cabinet using concealed, removable hinges with captive pins, offering 130 degree opening. Hinges can be mounted to allow left or right handed operation. A watertight seal is ensured by a one-piece, polyurethane gasket fitted to the inside of the door. Security is provided by one or two cylinder locks depending on the model. As the door opens within the outer dimensions of the cabinet, units can be mounted directly next to each other without any door interference.

On the base of the grey painted cabinets there is an aperture for cable access. One plain cover plate is supplied complete with a 5mm polyethylene gasket to maintain IP66 sealing. Note that no cable access apertures appear on any stainless steel models.

Cabinets are 300mm or 600mm wide overall and either 210mm, 300mm or 400mm deep overall, depending on model. Finishes available are Light grey, RAL 7035, powder coat, AISI 304 pre-grained stainless steel or AISI 316L pre-grained stainless steel.

Stock Code	Useable	External	External	External	Profile	Gland Plate	No of	Body	Door
	Height	Height	Width	Depth	Recess	Dimensions	Locks	steel	Steel
	(U)	(mm)	(mm)	(mm)	(mm)	(mm)		(mm)	(mm)
15-3071	8U	400	300	210	50	210 x 96	1	1.2	1.2
15-3091 / 15-3111	8U	400	300	210	50		1	1	1.5
15-3072	8U	400	300	210	100	210 x 96	1	1.2	1.2
15-3092 / 15-3112	8U	400	300	210	100		1	1	1.5
15-3073	8U	400	600	210	50	510 x 96	1	1.2	1.2
15-3093 / 15-3113	8U	400	600	210	50		1	1.5	1.5
15-3074	8U	400	600	210	100	510 x 96	1	1.2	1.2
15-3094 / 15-3114	8U	400	600	210	100		1	1.5	1.5
15-3075	12U	600	600	210	50	510 x 96	2	1.4	1.4
15-3095 / 15-3115	12U	600	600	210	50		2	1.5	1.5
15-3076	12U	600	600	210	100	510 x 96	2	1.4	1.4
15-3096 / 15-3116	12U	600	600	210	100		2	1.5	1.5
15-3077	12U	600	600	300	50	510 x 96	2	1.4	1.4
15-3097 / 15-3117	12U	600	600	300	50		2	1.5	1.5
15-3078	12U	600	600	300	100	510 x 96	2	1.4	1.4
15-3098 / 15-3118	12U	600	600	300	100		2	1.5	1.5
15-3079	12U	600	600	400	50	510 x 96	2	1.4	1.4
15-3080	12U	600	600	400	100	510 x 96	2	1.4	1.4
15-3081	16U	800	600	210	50	510 x 96	2	1.4	1.4
15-3099 / 15-3119	16U	800	600	210	50		2	1.5	1.5
15-3082	16U	800	600	210	100	510 x 96	2	1.4	1.4
15-3101 / 15-3121	16U	800	600	210	100		2	1.5	1.5
15-3083	16U	800	600	300	50	510 x 96	2	1.4	1.4
15-3102 / 15-3122	16U	800	600	300	50		2	1.5	1.5
15-3084	16U	800	600	300	100	510 x 96	2	1.4	1.4
15-3103 / 15-3123	16U	800	600	300	100		2	1.5	1.5
15-3085	16U	800	600	400	50	510 x 96	2	1.4	1.4
15-3086	16U	800	600	400	100	510 x 96	2	1.4	1.4