RYCOTE BOOM AND STAND ACCESSORIES
This range of Rycote boom and stand accessories include quick attaching and/or releasing adaptors to mount microphones or microphone suspensions to boom poles.
185801 PCS-Boom Connector
This 3/8-inch PCS-Boom Connector has been designed to give the sound recordist or boom pole operator a quick fitting and releasing solution to attach microphones or microphone suspensions to a boom pole such as the Panamic boom poles - see PANAMIC BOOM POLES (FISHPOLES) - Carbon fibre for more details. Compatible with 3/8-inch threaded boom poles, the installation and removal from the boom pole can be undertaken with one hand by using the sprung collar mechanism.
Included: 1x PCS-Boom Connector, 1x 3/8-inch Adaptor Tip with leather washer, 1x Hex key.
Dimensions (HxWxD): 136 x 58 x 30mm. Weight: 53g, including Adaptor Tip.
185805 Adapter Tips
This pack of two PCS-Boom adapter tips has been designed to affix to secondary microphone clips, shockmounts, or windshields so that the user can quickly swap between accessories. Each adapter tip comes fitted with leather washer.
Dimensions (HxWxD): 56 x 48 x 20mm. Weight: 26g, pack of two.
185807 Classic Adapter
The Classic Adapter allows connectivity between a Rycote windshield and PCS-Boom Connector. An included XLR ‘holder’ bracket is positioned with a slight ‘kick angle’ for clearance, and allows the user to neatly position the XLR with 360 degree rotation.
Dimensions (HxWxD): 80 x 90 x 60mm. Weight: 76g, packed.
185808 Cyclone Adapter
The Cyclone Adapter allows connectivity between Rycote Cyclone series windshield and PCS-Boom Connector. See RYCOTE MICROPHONE WINDSHIELDS AND SUSPENSIONS - Cyclone for details of Cyclone windshields. An included XLR ‘holder’ bracket is positioned with a slight ‘kick angle’ for clearance, and allows the user to neatly position the XLR with 360 degree rotation.
Dimensions (HxWxD): 80 x 90 x 60mm. Weight: 86g, packed.
048488 Back-To-Back Clips
Back-to-back clips are used for 'piggy backing' one microphone parallel to another when using a mid-side stereo pair or perhaps simply mounting an extra microphone at a press-conference. They are manufactured from the same Hytrel material as the Lyre supports used in Rycote suspensions and have a soft rubber internal grip to minimise noise and damage on the microphone body.
They fit round and 'slab-sided microphones' between 19 and 25mm diameter. They are supplied in pairs, together with rubber bands to tighten the grip and reduce the risk of slipping.
048493 XLR Holder MkII
This moulded fitting has a flat area with a hole to take the 3/8 inch stud of a microphone stand or boom; it is then held in place by a microphone clamp, suspension shock-mount or other 3/8 inch threaded accessory. It has a clamp to hold an XLR connector securely, fixed by tightening a knob.
As a result, the XLR is positioned at a set distance from the side of the pole to prevent the XLR becoming unclipped or making noise. The Mk II vesion is also strong enough to support the weight of most standard plug-on radiomic transmitters.
048402 Boom Poles Adapter
Supplied as standard with Rycote modular windshield kits, the is the adapter, as an alternative to a pistol grip, which connects a microphone stand or boom to the suspension. A threaded insert in the base fits 3/8 inch threaded studs on stand or boom. A circular plate fits to the suspension with angle-adjustment and locking accomplished by a ratchet lever.