AUDIO TECHNICA WIRELESS SYSTEMS - System 10 Pro Radiomics - 2.4GHz, digital
Audio Technica System 10 PRO is a compander free, digital, 24-bit/48 kHz wireless microphone system for fixed installation. The system operates in the licence-exempt, 2.4GHz frequency band. Similarly to other System 10 products, System 10 PRO is 'plug-and-play', making it suitable for a wide variety of user groups.
An automatic frequency selection function ensures intuitive set-up, interference-free and reliable performance. Both receiver and transmitter units incorporate an 'easy-to-read' numerical 'System ID' display and 'Pair' button.
System performance: Operating frequency: 2.4 GHz ISM band. Noise: Better than -109dB, A weighted. Distortion: Less than 0.05% THD. Operating time: 7 hours approximately. Operating temperature: 0 to 40 degrees C. Operating range: 60m open range environment with no interfering signals. RF Power Output: 10mW.
ATW-RU13 2.4GHz Receiver Unit
Present in all System 10 Pro wireless systems, the ATW-RU13 is a digital, 24-bit, 48 kHz diversity receiver with two detachable and adjustable antennas. It is designed to be mounted within the ATW-RC13 receiver chassis or as a remote receiver, mounted on a tripod using the 1/4 inch threaded socket positioned on the rear of the receiver module. An LED located between the mounting socket and RJ45 connector indicates current status, with solid green signifying paired status, slow blinking signifying not paired, and fast blinking to signify pair process in operation. This unit has no audio outputs and requires connection to the ATW-RU13 chassis. Dimensions: 57 x 19 x 77.6 (WxHxD) mm. Weight: 64g.
Included accessories: 2x Antenna, AT8690 RU13 holder
ATW-RC13 2.4GHz Receiver Chassis
The RC13 chassis is present in all System 10 Pro systems, along with up to two ATW-RU13 receiver units. Two slots are located on the front panel to receive the RU13 receiver modules, with eject buttons located below each slot for easy removal. A power switch is located to the left of the front panel, and when turned to the 'on' position a visual display illuminates to show audio reception, pairing status (as shown on the back of the RU13 receiver module, transmitter battery life, and RF reception, as well as the set channel. The rear of the chassis has all connectivity including 12V DC input, 3-pin balanced XLR output for each channel, unbalanced 6.35mm jack output for each channel, ground lift, and two link connections on RJ12. The RU13 receiver modules, if positioned remotely, can be connected via separate RJ45 inputs.
It is possible to link up to five ATW-RC13 receiver chassis via the supplied RJ12 cable. Linking the receivers creates one stable coordinated multi-channel system which can enable the simultaneous use of up to 10 channels. (Ordering note: Although individual components can be purchased separately, it is not possible to use multiple transmitters simultaneously with a single receiver). Dimensions: 209.8 x 44 x 169.3 (WxHxD) mm.
Included accessories: AC power adapter, link cable, rack mount adapters, joining plate, rubber feet.
ATW-T1002 2.4GHz Transmitter - Handheld
Supplied within the ATW-1302, ATW-1312, and ATW-1322 systems, the ATW-T1002 2.4 GHz handheld transmitter is fitted with a unidirectional dynamic microphone capsule. A 7-segment display identifies the numerical 'System ID'. A soft-touch switch in the base of the transmitter controls powering and mute. Coloured LEDs confirm battery status and mute condition. An input level (Gain) control is located beneath the cover which screws off the body, along with a miniature screwdriver for precise adjustment.
RF Power Output: 10mW nominal. Operating range: 30m (typical). Battery life: 7hrs (alkaline). Dimensions: 254.8 x 50mm. Weight: 280g (excluding batteries). Powering: 2x 1.5v AA battery (not included).
Included accessories: AT8456a Quiet-Flex stand clamp.
Optional accessories: Batteries, see AA batteries, 10-pack.
ATW-T1006 2.4GHz Transmitter - Boundary microphone
This cardioid, condenser, boundary microphone transmitter has a touch-sensitive switch which to toggles between talk and mute modes or functions as a press-to-talk or press-to-mute button. Red/green LEDs positioned on the front and rear of the microphone allow users to quickly determine toggle/talk/mute status, as well as battery or charging status. The internal rechargeable battery is a 3.7V lithium-ion type and provides up to nine hours of use. Charging is by way of the included USB cable. A switch on the underside of the microphone allows a technician to alter the input gain between -6dB, 0dB and +6dB.
Maximum input level: 139dB SPL. RF Power output: 10mW nominal. Operating range: 30m (typical). Dimensions: 96.1 x 38 x 122.8 (WxHxD) mm. Weight: 408g.
ATW-T1007 2.4GHz Transmitter - Microphone desk stand
The ATW-T1007 has many of the same properties as the ATW-T1006, however it is designed for the user to connect a gooseneck microphone with 3-pin XLR connector. This unit does not include a microphone. Wireless performance and specifications are the same as the ATW-T1006, weight is 392g.
ATW-T1001 2.4GHz Transmitter - Belt pack
Present in the ATW-1311 and ATW-1312 systems, the ATW-T1001 UniPak belt pack transmitter uses the same 7-segment display and intuitive pairing sequence as other System 10 components. The lightweight (100g excluding batteries) plastic body incorporates a fixed antenna. Pairing and level controls are located beneath the battery cover. Powering is via 2x 1.5v AA batteries (not included) which will provide approximately 7 hours of continuous use. Connection to lavaliere and head worn microphones is via 4-pin locking HRS connector.
RF Power Output: 10mW nominal. Operating range: 30m (typical). Battery life: 7hrs (alkaline). Dimensions: 70.2 x 107 x 24.9mm (WHD). Weight: 100g (excluding batteries). Powering: 2x 1.5v AA battery (not included).
Microphones, all with locking 4-pin Hirose connectors:
AT829CW cardioid, condenser, lavalier
AT831CW cardioid, condenser, lavalier
AT889CW noise cancelling, condenser, head-worn
PRO8HECW cardioid, dynamic, head-worn
PRO9CW cardioid, condenser, head-worn
ATM75CW cardioid, condenser, head-worn
Cables, all with locking 4-pin Hirose connectors:
AT-GCW 6.35mm jack, instrument cable
AT-GCWPRO 6.35mm plug, heavy duty guitar
AT-GRCWPRO right-angle 6.35mm plug heavy duty guitar
XLRW Low-impedance 3-pin female XLR
Batteries, see AA batteries, 10-pack.