Speciality lamps sets created by Littlite to fulfil a number of the more commonly asked for non-standard applications, including lamps to fit on any unused female XLR socket, lamps to mount on microphone stands and dedicated goosenecks to suit Midas audio consoles.
Universal Types
18X-LED-NA
This plugs into any unused female XLR socket, suited for consoles that have no dedicated task light connector or any panel with unused XLR inputs, such as stage and wall boxes.
It is a a derivative of a 457mm (18-inch), X-Series LED gooseneck lamp, supplied with an XLR housing without pin contacts. A captive cable exits from the side of the XLR housing to an in-line dimmer which is then connected via a 153mm (6-inch) lead with a 2.1mm coaxial socket. The lamp set is supplied as standard with the GXF-10 US power supply. For UK operation a Littlite LPS2-4-UK power supply, 51-838, is required.
18X-LED-MIC
This is fitted with a 5/8 inch threaded bush to take a standard 5/8 inch microphone stand. The more common 3/8 inch stands found in the UK may be accomodated by a thread adapter, such as 53-217. Many microphone accessories such as 'guitar clamps' can thus be used to position the lamp.
This is similar to a 457mm (18-inch), X-Series, LED gooseneck lamp but supplied with a 5/8” threaded female fitting rather than an XLR. A captive cable exits from the side of the XLR housing to an in-line dimmer which is then connected via a 153mm (6-inch) lead with a 2.1mm coaxial socket. The lamp set is supplied as standard with the GXF-10
Accessories
See LIttlite Gooseneck Lamps - Power supplies, adapter leads for spare power supplies and power adapter leads.
Dedicated Gooseneck Lamps - For Midas Consoles
These lamps are created especially to suit the Midas PRO2 mixing consoles. They have connector pins orientated correctly to suit the sockets on the console rear panel. Both LED and high-intensity halogen types are offered.
These are standard 18XR-4-LED goosenecks with the right-angle XLR pin orientation set for the sockets on the operator's right and left hand side, respectively.
This is a set of 1x 18XR-4-LED-MR and 1x 18XR-4-LED-ML, see above.
These are standard 18XR-Hi-4 goosenecks with the right-angle XLR pin orientation set for the sockets on the operator's right and left hand side, respectively.
This is a set including 1x 8XR-HI-4-MR and 1x 18XR-HI-4-ML, see above.