LYNX YELLOBRIK FIBRE OPTIC EXTENDERS - MADI - 10km or 40km with CWDM option
Designed to distribute MADI 64-channel audio over long distances, these modules, part of the yellobrik range manufactured by Lynx Technik, extend MADI circuits over distances of up to 10km or 40km using duplex or simplex fibre-optic cables. The yellobrik range includes a two-fibre transceiver (10km), a bi-directional WDM transceiver (10km) enabling send and receive over a single singlemode fibre, and a CWDM transceiver enabling transmission over duplex SM fibres up to 40km with the option to multiplex over a single fibre. A multimode (MM) duplex fibre version of the transceiver is also available providing a transmission range of up to 550m. Modules may be used alone, or mounted in an optional rack-mounting frame with dual (redundant) power supply option.
Coaxial input: 1x 75 ohm BNC. Supported standards: AES10-2008. Cable length 250m (SDV-L / Belden 1694A).
Coaxial output: 1x 75 ohm BNC. Amplitude: 750mV p/p. Cable length: 250m (SDV-L / Belden 1694A).
Power source: +12V DC, 2.7W, nominal, 7-16V DC AC adapter supplied.
Dimensions: 140 x 42 x 22mm including connectors.
Ambient operating range: 5 - 40 degrees C, 90% humidity (non-condensing).
Included accessories: All yellobrik modules are supplied each with a plug-top power supply with UK, US and European plug fittings, hook and loop mounting pads and a plastic transport case.
Optional accessories: Power adapter cables for 12V working, alternative power supplies and a rack-mounting frame for to 14 yellobrik modules are available. Please see Lynx Yellobrik Power Supplies And Mounting Accessories.
Technical note: WDM
WDM is wavelength-division multiplexing. This technology multiplexes a number of optical carrier signals onto a single fibre by using different wavelengths of light. This can be used to increase the capacity of the fibre or to enable bi-directional communication over a single fibre.
OTR 1210, OTR 1210 MM MADI coax - fibre transceivers
Both versions use the same basic module with either singlemode (SM) or multimode (MM) fibre SFP fitted. Each module has one fibre input and one fibre output via duplex LC connection.
Supplied complete with single-mode LC fibre SFP fitted.
Transmitter: 1310nm (-3dBm).
Receiver sensitivity: 1260nm to 1620nm (-3dBm to -21dBm).
Maximum distance: 10km
OTR 1210 MM
Supplied complete with multi-mode LC fibre SFP fitted.
Transmitter: 850nm (-2dBm to -7dBm).
Receiver sensitivity: 850nm (0dBm to -15dBm).
Maximum distance: 550m
OBD 1210 MADI coax - fibre bi-directional transceivers
The OBD 1210 modules are supplied in pairs complete with fibre SFPs fitted, one Type A and one Type B, which work together. They are linked together by a single fibre, using WDM multiplexing (see below), to provide a bi-directional (send and receive) transmission system for 64 channels of audio in MADI format.
Supplied complete with WDM singlemode Bi-Di LC fibre SFPs fitted.
Fibre transmitter/receiver: WDM using 1310nm and 1550nm wavelengths.
Optical budget: 18dBm.
Maximum distance: Approximately 10km.
Note: All type A modules are identical, as are all type B modules. Any Type A module can be paired with any Type B module.
OTR 1240 MADI coax - fibre transceivers - 40km / CWDM
Supplied as a module only, order CWDM LC transceiver OH-TR-54-XXXX SFP separately.
Suitable for either point-to-point connection or multiplexing, with a range of up to 40km.
Transmitter: CWDM (ITU-T G.694.2) 18 selectable wavelengths.
Receiver sensitivity: 1270-1610nm (-3dBm to -23dBm).
Maximum distance: Approximately 40km.
80km CWDM SFPs are available to special order - please contact Sales.