COVID-19: Canford remains open for business and web orders are being processed normally. Please see our Coronavirus statement for the latest updates.

UK Sales: 0191 418 1122         International: +44 191 418 1133

Menu

www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

ELECTROVOICE MICROPHONES - Instrument

This selection of microphones is more suited to instrument applications than vocals, either in live performance or studio environments. Some N/DYM Series designs, with neodymium based magnet structure providing greater sensitivity and signal-to-noise ratio are offered together with a true condenser instrument microphone and end-firing, large diaphragm dynamic microphones offering performance which is comparable with condenser based designs, in a considerably more rugged format. The classic RE200 is synonymous with American AM broadcasters, yet is equally suited for use with drums, or thrusting inside a saxophone.

ND68 - Dynamic, supercardioid

Designed specifically for kick drum or bass frequency applications in live environments, the ND68 is designed to have ‘excellent isolation’ from nearby audio sources. In addition to this isolation, a humbucking coil has been integrated to reduce any hum when using near speaker cabinets or EMF-generating equipment. The transducer is enclosed in a memraflex mesh screen fitted to a rugged die cast zinc body. Response is tailored to uplift bass at 50-60 Hz and upper frequencies at approximately 5kHz and 11kHz.

Applications: Kick drum, bass amplifier, tom. Frequency response: 20-11,000Hz. Sensitivity: 0.8mV/Pascal, open circuit. Maximum SPL: 140dB. Impedance: 150ohms. Dimensions (HxDia): 143 x 60.8mm. Weight: 374g.

Included accessories: Stand adapter, soft pouch.

RE20 - Dynamic, cardioid

This extremely versatile, venerable, broadcasting icon is used widely for presenter or DJ work in hundreds of AM stations, yet is also the mainstay of many a recording engineer's armoury. The heavy-weight case conceals large diaphragm and low-mass aluminium voice coil to give 'studio condenser' response, yet no powering is required and the microphone is near-immune to overloading. The unique EV dual-ported, continuously Variable-D design offers minimal proximity effect, and a steel case and hum-bucking coil provide exceptional magnetic shielding. A 'bass tilt down' switch corrects spectrum balance for use in long-reach situations or other applications where bass attenuation is needed. A true cardioid microphone, the RE20 offers greatest rejection at 180 degrees off-axis, directly to the rear of the microphone. An integral blast and wind filter covers each acoustic opening.

Applications: Accordion, acoustic strings, brass, guitar amplifier, kick drum, snare, speech, tom, woodwinds. Frequency response: 45-18000Hz. Sensitivity: 1.5mV/Pascal, open circuit. Dimensions: 217 x 55 (length x maximum diameter) mm. Weight: 737g.

Included accessories: Stand adapter, hard case, zipped vinyl pouch.
Optional accessories: 309A shock-mounted stand adapter for use with floor stand or recording boom.

RE27N/D - Dynamic, cardioid

The RE27N/D utilises the proven design concepts pioneered by the RE20 and incorporates neodymium magnet technology to create a dynamic microphone that exhibits higher output and even wider frequency response than the RE20. The continuously Variable-D design reduces bass-boosting 'proximity effect' to maintain a uniform low-frequency response, up close or at a distance. There are three switchable filters; one high-frequency and two low-frequency. Due to the increased sensitivity provided by N/DYM, the switchable filters enable the selection of either a flat high-end response or a shelving emphasis above 4 kHz for enhanced vocal presence, and the option of two low-frequency roll-offs. An integral blast and wind filter covers the microphone head and vents along the body, preventing 'pop' breath sounds or excessive sibilance.

Applications: Accordion, acoustic strings, brass, choir, guitar amplifier, kick drum, snare, speech, tom, woodwinds. Frequency response: 40-20000Hz. Sensitivity: 3.1mV/Pascal, open circuit. Dimensions: 217 x 54 (length x maximum diameter) mm. Weight: 709g.

Included accessories: Stand adapter, hard case, zipped vinyl pouch.
Optional accessories: 309A shock-mounted stand adapter for use with floor stand or recording boom.

309A SHOCKMOUNT, Cradle style, for RE20, RE27N/D

This suspension shock mount was designed specifically for use with the RE20 and RE27N/D dynamic microphones. It provides 'near-perfect' shock isolation for the already internally, shock-mounted RE20 or RE27N/D. For most applications, the Model 309A may be attached directly to the recording boom or to a floor stand. A stand adapter with 5/8 inch thread is provided.

The design allows quick installation of the RE20 or RE27N/D microphone without tools. A 'bayonet' locking action assures that the microphone will not fall out of the shock mount under its own weight and a set screw can be tightened to lock the microphone in place after it has been properly positioned. Four neoprene shock cords suspend and support the microphone within an aluminium and steel frame-work.

Spare elastics are available for the 309A shockmount in the form of the 78297.

  Description Price £
ex. VAT
Add to basket
Show carriage
ELECTROVOICE ND68 MICROPHONE, Dynamic, cardioid, bass drum   Stock code: 74-6106
Please login for stock availability and lead times.
£172.50
ELECTROVOICE RE20 MICROPHONE, Dynamic, cardioid, live instrument / announcer   Stock code: 92-320
Please login for stock availability and lead times.
£572.00
ELECTROVOICE RE27N/D MICROPHONE, Dynamic, cardioid, live instrument / announcer   Stock code: 92-327
Please login for stock availability and lead times.
£662.00
ELECTROVOICE RE200B MICROPHONE, Condenser, cardioid, live instrument, black Black Stock code: 92-325
No longer manufactured. See the product page for suggested alternatives.
ELECTROVOICE 78297 ELASTIC For 309A shockmount   Stock code: 92-308
Please login for stock availability and lead times.
£5.44
ELECTROVOICE 309A SHOCKMOUNT, Cradle style, for RE20   Stock code: 92-309
Please login for stock availability and lead times.
£110.80
ELECTROVOICE 320 MICROPHONE CLAMP, Spare, for RE20, RE27N/D, N/D868   Stock code: 92-316
Please login for stock availability and lead times.
£37.83
ELECTROVOICE 311 MICROPHONE CLAMP, Spare, for 635A   Stock code: 92-315
Please login for stock availability and lead times.
£15.73
ELECTROVOICE 379-1 WINDSHIELD, for N/DYM microphones, grey Grey Stock code: 92-313
Please login for stock availability and lead times.
£16.91