SHURE WIRELESS SYSTEMS - SLX-D Series - Digital
Shure SLX-D professional digital wireless UHF systems have been designed for use in lecture halls and houses of worship where RF stability is required. With a choice of systems using either handheld microphone, bodypack transmitter, desktop or rackmount receiver, SLX-D also caters for live music performance.
Frequency band: 606-650MHz (K59)
Usage Note: Licensing and legal use information for radiomic equipment in this product group is applicable to the UK only. Customers should check with the relevant regulatory body for the territory the equipment is to be used in prior to purchase to ensure appropriate legal usage and local environmental restrictions.
SLXD4 Receiver – Single channel
One of two receivers in the SLX-D range, SLXD4 is a desktop, single channel receiver that can be mounted in a 1U, 19-inch format by using the included mounting bracket kit. The user can operate up to thirty-two compatible systems in each 44MHz band block, using infrared pairing for speed of setup, or via Ethernet control for multiple setups. Features such as 120dB dynamic range and ‘digital predictive switching diversity’ – a process that allows the receiver to select the best receiving channel from channels A and B; are included on the SLXD4 receiver.
The front facing panel of the SLXD4 receiver has all status identifying tools including a flashing/solid LED for sync status, and visual display showing both receiver and linked transmitter settings along with menus for adjustment. Power button, control knob, sync and exit buttons are also located on the front facing panel, along with an infrared port for syncing with selected transmitter.
The rear facing panel of the receiver houses all audio and data connectivity including BNC connectors for antenna A and B, DC power supply input, Ethernet port with associated LED for status, and audio outputs on both balanced 3-pin XLR and balanced 6.35mm jack. Rack mounting fixing is provided to fit 19-inch racking.
Audio frequency response: 20-20kHz. Audio output: balanced 3-pin XLR, 150ohm mic, 400ohm balanced line, 200ohm unbalanced line; balanced 6.35mm jack, 1.3kohm balanced, 670ohm unbalanced. Networking: single port Ethernet 10/100Mbps. Network addressing: DHCP or manual IP address. Power source: 15V DC, 600mA, tip positive. Dimensions (H x W x D): 42 x 197 x 152mm. Weight: 816g.
SLXD4D Receiver – Dual channel
SLXD4D has all the functionality and specifications as the SLXD4 received, however it is doubled in terms of channels.
Dimensions (H x W x D): 42 x 393 x 152mm. Weight: 1451g.
SLXD2 Transmitter - Handheld
SLXD2 handheld transmitter is manufactured from metal for durability and offers interchangeable mic capsules including SM58, BETA58a, KSM8, BETA87a amongst others. This handheld transmitter is able to transmit a frequency range of 20Hz to 20kHz with flat response, however each mic capsule offers a different frequency response curve. Usage is up to eight hours continuous with 2x AA alkaline batteries, or a single SB903 lithium battery pack can be used to gain monitoring information including battery health, status, and remaining charge in hours and minutes. External charging contacts on the base of the microphone allow the recharging of the SB903 batteries when used with the compatible Shure SBC203 charging unit. Like the SLXD1, the SLXD2 offers OLED screen that shows important information including group/channel and frequency. Lockout functions are accessible by navigating the user menu.
Operating range: 100m without barrier. Display: OLED. Power source: 2x AA alkaline batteries or single SB903 lithium battery pack. Dimensions (D x L): 37.1 x 176mm Weight: 147g.
Shure microphone clamps are supplied as standard with a 5/8 inch thread. 5/8 inch to 3/8 inch adapters are available separately (stock code 53-217).
SLXD1 Transmitter - Beltpack
Manufactured from PC (Polycarbonate) and ABS (Acrylonitrile Butadiene Styrene) plastic, SLXD1 belt pack transmitter has many of the features the handheld transmitter offers, however has a fixed whip antenna and 4-pin TA4F connector for use with optional WA302, WA304, WA310, cables, WA360 in-line audio mute switch, or compatible lavalier microphones. SLXD1 has charging contacts for docking and charging with optional SBC203 battery charger, and can be powered using either 2x AA battery cells or a single SB903 rechargeable lithium battery pack. When the SB903 lithium-ion battery is employed, the user gains access to battery charge status in hours and minutes, along with battery life and health status.
Operating range: 100m without barrier. Display: OLED. Power source: 2x AA lithium/alkaline batteries. Battery life: 8h, alkaline. Dimensions (H x W x D): 98 x 68 x 25.5mm. Weight: 89g.