A preset mixer with ten mono inputs and four mono outputs, in a 1U rack mounting case. Any input may be routed to any of the outputs using switches behind a cover on the front panel. Uses include a multiple clean-feed generation, zone mixing and multiple stereo to mono conversion.
The inputs and outputs are electronically balanced, use XLR connectors and can be wired unbalanced. Each input has a gain control accessible through the front panel, with sufficient range to accommodate consumer and professional equipment at input and output.
Technical Specification:
| Input impedance: |
Greater than 20kohms, balanced |
| Maximum input level: |
+36dBu |
| Common mode rejection: |
Greater than 60dB typically |
| Gain range: |
-8dBu to +18dBu |
| Off-isolation / crosstalk: |
Greater than 90dB at 1kHz |
| Frequency response: |
20Hz to 20kHz, +/- 0.1dBu, 600ohm load, 1kHz |
| Distortion: |
Less than 0.01%, 1kHz, 0dBu to +26dBu |
| Noise: |
-86dBu RMS 22Hz-22kHz unity gain, ref +8dBu |
| Output impedance: |
Less than 50ohms |
| Maximum output level: |
+28dBu |
| Power source: |
110-120V, or 220-240V AC, 6W maximum, switchable |
| Dimensions: |
480 x 108 x 420 (w x d x h) mm |
| Weight: |
1.5kg |
Included accessories: Handbook, IEC supply cable with plug.
Optional accessories: RB-RK3 rear panel rackmount kit for reverse mounting.