These two ranges provide discreet, localised, illumination in a variety applications, such as industrial machine lights or workstation lights where the lamp base is to be fixed to a surface, with the cable going through it. Two chassis configurations are available, each with a choice of two gooseneck lengths and a choice of LED or halogen lamp.
Available in two gooseneck lengths of 305 and 457mm (12 and 18 inches), with permanent top-mount and end-mount gooseneck fittings.
These use the Littlite surface-mounting base with top-mounted, permanently-fixed, goosenecks with full-range dimmer for halogen models and 3-way switch to switch between off and white or red colour output for standard LED models and off and white or blue colour output for LED-BLUE models. Terminated via a 305mm (12 inch) lead with a 2.1mm DC coaxial socket exiting through the base. All IS# Units are supplied with an Energy Star qualified switch-mode 12V power supply with US connector as standard.
The surface-mounting base is a rectangular metal enclosure with a footprint of approximately 75mm x 25mm. Height is approximately 18mm, or 50mm to the top of the control knob. By removing two screws from the upper surface, a 'chassis plate' is revealed, which may be fastened to a flat surface by means of fasteners fitted through two screw holes, after which the upper part of the base may be replaced to cover the plate and fasteners. Alternatively the chassis plate may be fixed by to a surface by two machine screws, fitted from the other side of the mounting surface. In some applications, hook and loop style fasteners may prove sufficient. See Littlite Gooseneck Lamps - Mounting hardware for a variety of alternatives, including a magnetic base, clips, clamps and rack adapter.
These use a low-profile base, made from an extrusion with a central 'tube' and two flat 'wings' which lie flat on the mounting-surface. The two wings have fixing holes for fasteners; one end of the tube, which lies parallel to the mounting surface, has an on/off switch, the other a permanently-fixed gooseneck, exiting the base parallel to the mounting surface. A 500mm captive cable exits the bottom of the tube so the plate may be mounted flat on the surface, with no cable showing.
Halogen lamp: 5W nominal; 380mA at 12V. Light output: 237 Lux, at 305mm. Colour temperature: 3000K.
LED array: 1.5W nominal; 150mA at 12V. Light output: 398 Lux, at 305mm. Colour temperature: 4000K. CRI (Colour rendering) 85RA.
For UK operation a Littlite LPS2-4-UK power supply, 51-838, is required. See Littlite Gooseneck Lamps - Power supplies, adapter leads for spare power supplies and power adapter leads. All power supplies are terminated via a 1.8m (6 foot) lead with 2.1mm DC coaxial plug.