CANFORD ANALOGUE AUDIO LIPSYNC DELAY - 2 channel
A two-channel, low cost, stereo 'lipsync' audio delay for offline editing and monitoring, with a minimum of engineer set-up controls and no user-adjustable controls.
The inputs are balanced, line-level, or unbalanced, consumer level (500mV), auto-sensing, on XLR 3-pin female connectors. Output is balanced, line-level, on XLR 3-pin male connectors. The gain is adjustable via recessed controls -12dB to +12dB, accessible by screwdriver or trimpot tool.
The delay is user-adjustable from 850 micro seconds to 337 milliseconds in 1 millisecond steps, via recessed controls accessible by screwdriver or trimpot tool.
The unit is housed in a rugged, extruded aluminium case with protective end-bezels. Power input is 230V AC via a fused IEC inlet (mains cable not included).
Technical Specifications:
Audio
| Input impedance: |
47k ohms |
| Input level: |
+12dBu maximum |
| Gain range: |
-12dB to +12dB, nominal |
| Load impedance: |
500 ohms to 50k ohms |
| Output noise: |
-69dB RMS re. +6dBu output (20Hz-22kHz, 0dB gain, input terminated 600 ohms) |
| Distortion: |
0.03%THD (1kHz, +6dBu output) |
| Frequency response: |
20Hz-20kHz +/- 1.8dB |
| Output level: |
+10dBu (10k ohms load), +10dBu (600 ohms load) |
Delay
| Delay: |
850 micro seconds to 337 milliseconds, adjustable in 1ms steps. |
General
| Power source: |
230V AC +/- 10%, 6VA |
| Dimensions: |
220 x 110 x 47 (l x w x h)mm. |
| Weight: |
1kg |
Optional accessory: Steel clamp bracket 16-728 is designed to allow the unit to be fitted on the underside of work surfaces.
NOTE: This product is NOT suitable for programme chain use, it has been designed solely for use in edit suites and at editing workstations.