A comprehensive range of power supplies and adapter leads to facilitate the powering of Littlite task lights.
Power Supply - LPS2-4-UK
A 12V DC 2A power supply suitable for use with all Littlite incandescent, halogen and LED type lights. Having a case with fixing lugs, this unit can easily be wall mounted if required. Mains connection is via a 1.5m cable to a UK 3 pin 13A plug, outlet connection is via a 1.8m (6 foot) lead with 2.1mm DC coaxial plug.
Power Supply - EXF-10G
12V DC 1.0A, plug-in, Euro (Shuko Plug) power supply, suitable for use with all Littlite incandescent, halogen and LED type lights with a captive lead and 2.1mm DC inlet socket. With a 1.8m captive cable, the outlet connection is a 2.1mm DC coaxial plug.
Power Supply - GXF-10
12V DC 1.0A, plug-in, US, 2-pin power supply suitable for use with all Littlite incandescent, halogen and LED type lights with a captive lead and 2.1mm DC inlet socket. A 1.8m captive cable is terminated with a 2.1mm DC coaxial plug.
Adapter Cable - BA
BNC female to 2.1mm coaxial plug. Provides power to any Littlite task light with captive lead and 2.1mm DC inlet socket, from an unused BNC connector on a sound console.
Adapter Cable - CP-2
Cigarette plug to 2.1mm DC coaxial plug, 1.8m cable. Powers any Littlite task light with captive lead and 2.1mm DC inlet socket from a 12-volt, cigarette plug style power point.
Extension Cable - EXT
2.1mm DC coaxial socket to 2.1mm DC coaxial plug, 1,8m cable. Extension cable for all power supplies outlined in range.
Adapter Cable - GAD
2.1mm DC coaxial socket to 2x 6.3mm female spade terminals. Provides connection of all power supplies listed to older Littlite task lights.
Power Cable - LAD
2.1mm DC coaxial socket to bare ends. For the connection of any of the listed power supplies to panel-mounted sockets.
Wiring Kit - LV
A wiring kit for connecting hard-wired Littlite lamps to 12V power. Consisting of an in-line fuse and holder, 2x crimp female spade connectors, 2x crimp male spade connectors, 1x ring crimp terminal, 1x IDC splice and a set of instructions.
Power Splitter - PYE
2.1mm DC coaxial socket to 4x 2.1mm coaxial plugs. Provides connection of up to four low-intensity or LED goosenecks to any listed power supply. (NOT recommended for use with high intensity task lights)
Power Splitter - WYE
2.1mm DC coaxial socket to 2x 2.1mm DC coaxial plugs. Provides connection of two Littlite task lights to any listed power supply.