LUSEM OXLINX ACTIVE OPTICAL CABLES - HDMI 2.0 - Deployable
Lusem 'OxLinx' series of active, optical, HDMI 2.0 cables are intended for applications where longer cable-run lengths are required than can be obtained with standard copper HDMI cables. They are also useful where the cable needs to pass through environments with high electrical interference and offer a considerably more elegant and cost-effective solution for long cable runs than Cat5E cable with converter box systems.
Designed for rental and stage use, applications can include professional AV systems interconnection and indoor and outdoor digital signage and kiosks as well as home theatre systems in larger houses. To enable HDMI 2.0, the plug on HDMI type A adapters may require external USB powering for certain equipment.
Cables are available in a range of lengths from 10 to 100 metres and all have a LSOH (low smoke zero halogen) cable jacket. They support 18Gb/s and 4K at 60Hz, with 8-bit colour-depth and 3D capabilities. Audio can be transmitted as 8-channel PCM, Dolby Digital True HD or DTS-HD Master Audio.
LHM2-PT Types
LHM2-PT cables are manufactured from 4.5mm TPU (thermo-plastic urethane) and are terminated with micro HDMI type D connectors and supplied with adapters to fit full-size, type A, HDMI connectors. Also known as the 'pluggable' versions, LHM2-PT cables were developed to aid fixed installation; the micro HDMI connectors reducing the likelihood of snagging as the cable is pulled through conduit, fed through voids or behind plaster board. Other benefits may include applications where cables must pass through congested and/or small apertures, such as internally wired brackets and mounts. The cables are crush resistant to 500kg and have successfully passes the IEC 60794-1 E2A jacket abrasion test.
Included accessories: Custom, screw-locking, micro HDMI-D to HDMI-A adapters are supplied with LHM2-PT pluggable cables.
Replacement adapters are available if required; 38-8892 (Display) & 38-8893 (Source).
Ordering notes:
(1) Lusem active HDMI2.0 cables may require external power via the included Micro USB to USB cable. By using in conjunction with one or more DVI-D adaptors the cable will no longer be HDMI2.0 compatible but will convey HDMI1.4 signal.
(2) Lusem LHM2-PT cables have a crush-resistant jacket, up to 500kg, and are therefore suitable for deployable applications.