NEUMANN EA 1 MT MICROPHONE SUSPENSION Elastic, for TLM 103 MT/TLM 193, black

Stock code

92-883

Brand

Neumann

Model number

EA 1 MT

Colour

NEUMANN EA 1 MT MICROPHONE SUSPENSION Elastic, for TLM 103 MT/TLM 193, black

Order

VAT / Delivery

£240.80
each (ex. VAT)

Quantity

Ordered on demand, cancellations may incur charges, available in 1‑2 weeks. Need it sooner? Call us

RoHS Compliant

Also bought

Find similar

NEUMANN MICROPHONES - Studio - Large diaphragm, condenser

Neumann large-diaphragm microphones are renowned their quality when used for professional and semi-professional recording and broadcast applications. This range of microphones have either fixed or variable polar patterns to suit microphone positioning and the pick-up pattern required.

TLM Series

TLM 102

Available in nickel or black finish, and in Studio Set variants that include EA 4/EA 4 BK shock mounting suspension. TLM 102 has been designed for broadcast, voice over, home and professional studio, and live environments, and is said (by Neumann) to be 'beautifully balanced sound for silky vocals, crisp guitars and powerful drums'. A cardioid pickup pattern and 20Hz to 20kHz frequency response, with a slight lift around 10kHz, along with a 'well-controlled' proximity effect enables the user to capture the character of the subject, whilst a self-noise level of 12dB-A is low in comparison to the ambient noise of a quiet room. The microphone is often used for male or female vocals, electric guitar, bass guitar, double bass, percussion, brass and saxophone, aided by a dynamic range of 132dB and maximum SPL of 144dB.

Spare and accessories: SG 2 stand mount, EA 1 elastic suspension, EA 1 MT elastic suspension, EA 4 shock mount, EA 4 MT shock mount, WS 2 windshield.

Variants

TLM 102	A TLM 102 microphone with nickel finish and SG 2 swivel mount.
TLM 102 BK	A TLM 102 BK microphone with black finish and SG 2 swivel mount.
TLM 102 Studio Set	This set includes the TLM 102 microphone with nickel finish, and EA 4 elastic suspension mount in place of SG 2 mount.
TLM 102 BK Studio Set	This set includes the TLM 102 BK microphone with nickel finish, and EA 4 BK elastic suspension mount in place of SG 2 mount.

TLM 103

Available in nickel and black along with Studio Set versions, this pressure-gradient, large diaphragm, cardioid, condenser microphone has been designed for applications including broadcast, voiceover, home studio, live sound, concert hall, or recording studio. The capsule has been derived from the popular U 87 Ai and is 'acoustically well-balanced' and often preferred for vocal recording, broadcast announcing, or for instruments such as wind, strings, percussion and overhead drum positioning. A frequency response of 20Hz to 20kHz is offered, with a flat frequency response up to 5 kHz and a wide, flat, presence boost of 4dB above that. A wire mesh protects the capsule as well as offers resistance to plosives and pop noises. A Neumann SG 2 swivel mount is included in standard versions, or EA 1/EA 1 MT with Studio Sets. Both mounts are designed for use with a compatible microphone stand. The microphone has a 3-pin XLR connector and requires +48V phantom power.

Spare and accessories: SG 2 swivel mount, EA 1 elastic suspension, EA 1 MT elastic suspension, WS 82 windshield.

Variants

TLM 103	A TLM 103 microphone with nickel finish and SG 2 swivel mount. The product is furnished with wooden box.
TLM 103 MT	A TLM 103 microphone with black finish and SG 2 swivel mount. The product is furnished with wooden box.
TLM 103 Studio Set	This set includes the TLM 103 microphone with nickel finish, and EA 1 elastic suspension mount in place of SG 2 mount.
TLM 103 MT Studio Set	This set includes the TLM 103 MT microphone with nickel finish, and EA 1 MT elastic suspension mount in place of SG 2 mount.

TLM 107

Available in nickel or black finish, and in Studio Set variants that include shock mounting suspension; TLM 107 has been designed for use in broadcast, voice over, home or professional studio, live event or concert hall environments. A dynamic range of 131dB allows the TLM 107 to capture 'anything from a slight whisper to massive drums without unwanted noise or distortion'. The microphone can be switched between five polar patterns including omnidirectional, wide angle cardioid, cardioid, hypercardioid, and figure-8. The navigation toggle on the back of the microphone allows control over settings including 0/-6/-12dB pad, linear/40Hz/100Hz low cut, and the afore mentioned polar patterns.

Spare and accessories: SG 2 stand mount, EA 1 elastic suspension, EA 1 MT elastic suspension, EA 4 shock mount, EA 4 MT shock mount, WS 47 windshield.

Variants

TLM 107	A TLM 107 microphone with nickel finish and SG 2 swivel mount. The product is furnished with wooden box.
TLM 107 BK	A TLM 107 BK microphone with black finish and SG 2 swivel mount. The product is furnished with wooden box.
TLM 107 Studio Set	This set includes the TLM 107 microphone with nickel finish, and EA 4 elastic suspension mount in place of SG 2 mount.
TLM 107 Studio Set BK	This set includes the TLM 107 BK microphone with nickel finish, and EA 4 BK elastic suspension mount in place of SG 2 mount.

TLM 193

TLM 193

This black, large diaphragm, cardioid, condenser microphone is aimed at professional and semi-professional recording of vocals and instruments where close-positioning to high sound pressure levels is required, having a capability of handling sound pressure levels up to 140dB without distortion. It is supplied in a wooden box along with Neumann SG 2 swivel mount. A wire mesh grille protects the capsule as well as offers resistance to plosives and pop noises. The microphone has a 3-pin XLR connector and requires +48V phantom power.

Spares and accessories: SG 2 swivel mount, EA 1 MT elastic suspension, WS 89 windshield.

TLM Series Specifications

	TLM 102	TLM 103	TLM 107	TLM 193
Acoustical operating principle	Pressure gradient transducer	Pressure gradient transducer	Pressure gradient transducer	Pressure gradient transducer
Directional Pattern	Cardioid	Cardioid	Omni, wide angle cardioid,	Cardioid
			cardioid, hypercardioid, figure-8
Frequency Range	20 Hz - 20 kHz	20 Hz - 20 kHz	20 Hz - 20 kHz	20 Hz - 20 kHz
Sensitivity at 1 kHz into 1 kohm	11 mV/Pa	23 mV/Pa	11 mV/Pa	18 mV/Pa
Rated Impedance	50 ohms	50 ohms	50 ohms	50 ohms
Rated load impedance	1 kohms	1 kohms	1000 ohms	1 kohms
Equivalent noise level, CCIR	21 dB	17.5 dB	22 dB	21 dB
Equivalent noise level, A-weighted	12 dB-A	7 dB-A	10 dB-A	10 dB-A
Maximum SPL for THD 0.5%	144 dB	138 dB	141 dB	140 dB
Signal-to-noise ratio, CCIR (1)	73 dB	76.5 dB	72 dB	73 dB
Signal-to-noise ratio, A-weighted (1)	82 dB	87 dB	84 dB	84 dB
Maximum output voltage	13 dBu	13 dBu	10 dBu	13 dBu
Supply voltage (2)	48 V +/-4 V	48 V +/-4 V	48 V +/-4 V	48 V +/-4 V
Current consumption (2)	3.5 mA	3 mA	3.2 mA	3 mA
Matching connector	XLR 3 F	XLR 3 F	XLR 3 F	XLR 3 F
Weight	approx. 210 g	approx. 450 g	445 g	approx. 480 g
Diameter	52 mm	60 mm	64 mm	49 mm
Length	116 mm	132 mm	145 mm	175 mm

Notes: (1) re. 94dB SPL. (2) P48, IEC 61938.

U Series

U 87 Ai

This microphone is a Neumann classic best-seller and is available in either nickel or black finish, and in Studio Set versions that include the elastic suspension mount. The polar pattern is variable; omni directional, cardioid and figure-of-eight patterns can be set using a switch located below the mesh grille. There are also switches to apply 10dB attenuation and LF roll-off to frequencies below 1kHz. Applications include 'spot' placement for instruments such as wind, string, piano and percussion, 'overhead miking', and vocal recording. The U87 Ai is capable of handling sound pressure levels up to 127dB without distortion. The microphone has a 3-pin XLR connector and requires +48V phantom power. It is supplied in wooden box.

Spares and accessories: EA 87 elastic suspension, EA 87 MT elastic suspension, WS 87 windshield.

Variants

U 87 Ai	A U 87 Ai microphone with nickel finish. The microphone is furnished with wooden box.
U 87 Ai MT	A U 87 Ai microphone with black finish. The microphone is furnished with wooden box.
U 87 Ai Studio Set	This set includes the U 87 MT microphone with nickel finish, together with an EA 87 MT elastic suspension mount. A wooden box houses the microphone, with the suspension included in the outer cardboard packaging.
U 87 Ai MT Studio Set	This set includes the U 87 MT microphone with black finish, together with an EA 87 MT elastic suspension mount. A wooden box houses the microphone, with the suspension included in the outer cardboard packaging.

U 89 i

With similar shape to the U 87 Ai, but a little smaller, the U 89 I is available in nickel or black finish. Five polar patterns, omni directional, wide cardioid, cardioid, hyper-cardioid and figure-of-eight are available to suit most studio applications, such as instrument 'spot' pick-up and voice reproduction. This versatile microphone offers a frequency response of 20Hz to 20kHz with the option of a two-stage, LF roll-off filter to reduce frequencies below 80Hz or 160Hz. Use of the 6dB attenuator switch takes the maximum sound level, for 0.5% THD to 140dB - more than the peak sound pressure level immediately in front of a trumpet. The microphone has a 3-pin XLR connector and requires +48V phantom power.

Spares and accessories: EA 89 A elastic shock mount, SG 289 stand mount, WS 89 windscreen.

Variants

U 89 i	A U 89 i microphone with nickel finish. The microphone is furnished with wooden box.
U 89 i MT	A U 89 i microphone with black finish. The microphone is furnished with wooden box.

U Series Specifications

	U 87 Ai	U 89 i
Acoustical operating principle	Pressure gradient transducer	Pressure gradient transducer
Directional Pattern	Omnidirectional, cardioid,	Omnidirectional, wide angle,
	figure-8	cardioid, hypercardioid, figure-8
Frequency Range	20 Hz - 20 kHz	20 Hz - 20 kHz
Sensitivity at 1 kHz into 1 kohm	20/28/22 mV/Pa ± 1 dB (Omni/cardioid/8)	8 mV/Pa = −42 dBV ± 1 dB
Rated Impedance	200 ohms	150 ohms
Rated load impedance	1 kohms	1 kohms
Equivalent noise level, CCIR	26/23/25 dB (Omni/cardioid/8)	28 dB
Equivalent noise level, A-weighted	15/12/14 dB-A (Omni/cardioid/8)	17 dB-A
Maximum SPL for THD 0.5%	117 dB (cardioid)	134 dB
Maximum SPL for THD 0.5% with preattenuation	127 dB	140 dB
Signal-to-noise ratio, CCIR (1)	68/71/69 dB (Omni/cardioid/8)	66 dB
Signal-to-noise ratio, A-weighted (1)	79/82/80 dB (Omni/cardioid/8)	77 dB
Maximum output voltage	-6 dBu	0.3 dBu
Supply voltage (2)	48 V ± 4 V	48 V ± 4 V
Current consumption (2)	0.8 mA	0.8 mA
Matching connector	XLR 3 F	XLR 3 F
Weight	500 g	400 g
Diameter	56 mm	46 mm
Length	200 mm	185 mm

Notes: (1) re. 94dB SPL. (2) P48, IEC 61938.

Description Price £
ex. VAT Add to basket
Delivery