CANFORD MDU2Q AC MAINS POWER DISTRIBUTION UNIT Sequence, red, grey

This range of units has been discontinued. The Canford MDU6 range offers similar features and functionality, with the addition of an IEC loop-out connector for the incoming supply. Available whilst stocks last.

This range of twelve-way, IEC outlet, AC mains power distribution panels with a 20 amp Powercon locking inlet connector is housed in a compact 1U rackmount case. They have on the front panel an illuminated power rocker switch, fuse and dual LED indication of power status for each of the output channels. Inlet and outlets are on the rear panel.

The fuses on the front panel have adjacent green and red LEDs. Green illuminated indicates that the circuit is powered correctly. Red illuminated (and green off) indicates that the fuse has failed.

All outputs are numbered front and rear for easy identification and a designation- strip holder with snap-on cover is fitted on the front panel. The paper strips supplied may be inserted before or after installation; 7.5mm of printable height is available. Templates for printing designation strip labels, available as a DWG file for AutoCAD and compatible applications, can be downloaded from the appropriate product page on the Canford website.
Spare designation-strip inserts (not suitable for printers) 45-3082 and spare clear covers 45-3092 are available.

As IEC cable plugs vary enormously in size and design it is not possible to define a ‘universal’ connector wire retaining clip. To overcome the challenge of securing all IEC connector types both re-wireable and moulded, a single lacing-bar is fitted as standard. The stainless rods may be fitted in a variety of positions to take account of cable connector size.

The front panel has an illuminated switch, independent outlet fuses with status indicators. The rear panel has a 20 amp Powercon locking inlet connector and twelve 10amp IEC outlets. An earth stud is fitted.

Note: Switched versions - maximum total load: 16 amps.
Un-switched versions - maximum total load: 20 amps.

Finished in Dawn Grey, with green illuminated switch on the front panel.

Mating connectors are NOT included and should be ordered separately as required.

Required accessories:
Input connectors: Neutrik Powercon type, NAC3FCA, stock code 42-021.
Output connectors: Bulgin, stock code 42-153 or Schurter, stock code 42-054.
Moulded mains leads: A large range are offered, see AC Mains Power Leads.
Locking, moulded, mains leads: Patented, locking IEC leads, see AC Mains Power Leads - IEC-Lock.

Technical Specification:

Dimensions and weight:

1U, 19-inch rack mounting, 44 x 483 (h x w) mm.