Wisycom accessories are designed to complement Wisycom wireless microphone or In Ear Monitoring systems.
Wisycom's UPK MINI Infrared programming kit is a compact and lightweight USB interface that has been designed as an intermediary device to sit between a PC with Wisycom Manager software and other Wisycom hardware with infrared, to assist in setup. Once connected by infrared the user can edit frequency, channel and group information as well as other settings including Mic Mode, Phase, LED mode, and pre-set information.
Compatible devices: MCR42S, MTH400, MTP40S, MTP41S, MPB40S, MPR50-IEM.
This LPDA (log periodic dipole Array) active wideband antenna is housed within a ‘sturdy’ metal body, has epoxy protection of the cable joints, and has 5/8-inch mounting thread. The antenna has a working bandwidth of 470-870MHz and a typical beam width of 90-degrees. The integrated amplifier provides 15dB gain, with user adjustable steps of 1dB.
LBNA2 has BNC type connection
LNNA2 has N-type connection
Power supply: +12V, 100mA. Dimensions (HxWxD): 276 x 336 x 61mm. Weight: 535g.
The LFA directional wideband antenna, with an ‘ultra-wideband’ frequency range of 410-1300MHz has a waterproof gasket along with an epoxy fiberglass skeletal form, designed to reduce wind resistance and therefore reduce any movement which cause fluctuating quality of operation. Available with either N Type connector or BNC connector; both with an impedance of 50ohms, the LFA antenna can be set up to receive commands remotely via the RF coaxial cable. Alternatively the setup options can be applied using the inbuilt navigation buttons and TFT display. Three tuneable high pass and three tunable low pass filters can be applied to control interference and a fixed 935-960MHz saw filter can also be applied.
F1 versions offer tuneable high pass filters at 410/470/510MHz, tuneable low pass filters at 600/700/810MHz, and fixed filter at 935-960MHz.
F2 versions with BNC or N type connector are available by request. This version has high pass filters at 470/520/550MHz, low pass filters at 617/663/698MHz, and fixed filter at 935-960MHz.
Power supply: +12V, 100mA. Dimensions (HxWxD): 276 x 336 x 61mm. Weight: 550g.