ENCLOSURE SYSTEMS RACKS - 262T Series Cabinets - Assembled
These 262T Series rack cabinets are a competitively priced range of floor-standing, 19 inch, steel-framed racks. Available in two widths, four depths, a range of heights and in a choice of grey or black finish, they are supplied fully assembled, with removable front and rear doors and side panels.
Alternative models are available, supplied without doors and side panels, with the same basic frames as the 262T models, see Enclosure Systems Racks - 262BF Series Cabinets - Basic Frames. These may be combined with accessories, to make up enclosed cabinets or bayed suites.
Similar models, optimised for use with servers, are also offered, see Enclosure Systems Racks - 296S Series Cabinets - Server - Assembled.
The racks are available in four depths, 600mm, 800mm, 1000mm or 1200mm. Each rack has four pillars forming the frame of the rack, fixed to top and base frames. Horizontal cross-members fix to the pillars, front to back. Front and rear 'rack strip' mounting-profiles fix to the cross-members, and are adjustable through the depth of the cabinet, to suit installation of rack slides and deep or shallow equipment. The mounting-profiles have two sets of perforations to take cage nuts, to fix equipment both in the open faces of the rack and accessories, such as shelves and chassis guides, inside the rack. They have three apertures for cage nuts per 1U on each face and are screen-printed with 'U' height measurements to aid installation.
All doors fit flush, within the rack frame. The front 'picture-frame' doors have toughened, safety-glass inserts and swing lock. This has a door handle which sinks into the door when locked, nearly flush with the front. The rear doors are plain steel, with a cylinder lock. Both have quick-release hinges to improve access in confined spaces. The two steel side-panels fit to the bottom of the rack and have spring-loaded catches and a cylinder lock at the top.
Top covers and bases have air vents. The top has a removable rectangular panel towards the rear and circular knock-outs for cable entry. Base plates are included; all or part can be removed for cable entry. Racks are supplied with an fitted earth-continuity kit and standard-duty 'transit' castors, 450kg maximum load per set of four.
The 800mm wide cabinets offer considerable space at either side of the mounting profiles, which are mounted on spacer-blocks to the horizontal cross-members. Optional, vertical, cable-management frames, with side and rear cable apertures, plastic rings and cover, can be front-mounted to the spacer blocks, see below. The racks can be supplied with these frames fitted. Please call Enclosure Systems Sales on 0191 418 1177.
Note (1): Height without castors, levelling feet or plinth, including an allowance of 10mm for screw heads.
|Maximum depth for equipment:
||Nominal depth minus 40mm.
||800kg with or without levelling feet, 450kg with standard castors, 600kg with heavy duty castors.
||Light grey, RAL 7035, or black, RAL 9004, powder coat.
See Enclosure Systems Racks - Accessories - Hardware - For 262, 296 Series for fixing brackets, plinths, fixed shelving, cable management panels and baying kits.
The racks will also accept most standard 19-inch accessories and fittings. Enclosure Systems offer a range of accessories and fittings with matching finish, which are listed in this section.