UK Sales: 0191 418 1122         International: +44 191 418 1133


25 June 2024
  • Next day delivery
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

TC ELECTRONIC DB-8 MKII AES TRANSMISSION PROCESSOR 25-pin D-sub connector, XLR breakout, redundancy

Stock code
TC Electronic
TC ELECTRONIC DB-8 MKII AES TRANSMISSION PROCESSOR 25-pin D-sub connector, XLR breakout, redundancy
TC ELECTRONIC DB-8 MKII AES TRANSMISSION PROCESSOR 25-pin D-sub connector, XLR breakout, redundancy

TC ELECTRONIC PROCESSORS - DB8 MKII - Transmission processor

The DB-8 mkII is a loudness tool with four processing engines and redundant power, designed for larger broadcast centres. Using this hardware along with the TC Icon remote or a connected computer running TC Icon Software, the user can ensure that the loudness of the source is compliant with the latest legislation including ITU BS.1770, EBU R128, ATSC A/85, TR-B32, and OP-59.

The four engines of the DB8 are capable of running a total of four independent processing algorithms. Algorithms that are pre-installed include;

Algorithms that are pre-installed include:
LM6 - a visual reference of an audio source including information such as loudness history, momentary loudness, program loudness and loudness range.
DMix - an algorithm that allows the downmix, peak limit, and loudness of a mono, stereo, or 5.1 source.
UpCon HD -.uses intelligent monitoring to 'seemlessly' crossfade any signals to 5.1 if they fall back to stereo.
Multiband 5.1 - simple four band dynamic control for 5.1 including compression, limiting and expansion.
EQ/Delay 8 - multi-channel EQ with four band parametric EQ, and user defined delay.
ALC6 - automatic loudness management with correction.
MDX 5.1 - a dynamic controller with compression and limiting for multichannel signals.
ATX/DTX - 48 bit peak limiter, level optimiser and loudness control for stereo, wide stereo, or dual mono signals.
Downconvert 5.1 - is an algorithm to downmix multichannel formats such as 5.1, to stereo or mono output.

The 2U front panel is mainly dedicated to visual indication, with LEDs illuminating green to signal power to each of the two independent power sources - these LEDs light up red if there is a problem with the related power input. A single LED shows the status of the unit - with green being 'ok', flashing orange meaning 'update in progress' and red indicating a network issue. Additionally, the front panel houses a reset button which can be used to reset the I/P address to default and a PCMCIA slot whereby a user can use a card of up to 2MB SRAM to store additional presets and banks.

The rear panel has IEC inlets for mains power and input and output connectors.

Ordering Notes:

The DB-8mkII is offered in four configurations. All share the same features of MIDI in/out/through connectors, 6.35mm jack input socket for SMPTE sync and a 6.35mm jack socket input to which a pedal can be connected to switch up to eight presets. A ground-lift switch can also be used if there is a problem with mains 'hum'. An RJ45 Ethernet LAN connection can be used to link to a computer or TC Icon remote.

These configurations have in addition the differing I/O options listed:
87-0151 8-channel single-stream HD SDI with BNC I/O
87-0152 16-channel dual-stream HD SDI with BNC I/O
87-0153 8-channel AES I/O with balanced D-sub connectors and XLR breakout
87-0154 8-channel AES3id I/O with unbalanced BNC connectors

Inputs and outputs:
87-0151: 2x 75 ohm BNC input, 2x 75 ohm BNC output, 1x Firewire.
87-0152: 4x 75 ohm BNC input, 4x 75 ohm BNC output, 1x Firewire.
87-0153: balanced 110ohm 25-pin D-Sub.
87-0154: 4x unbalanced 75ohm BNC input, 4x unbalanced 75ohm BNC output

Power source: 2x 100-240 V AC, 50-60 Hz, 60W. Dimensions: 89 x 483 x 305 (h x w x d) mm. Weight: 8.6kg

Alternative product

For applications needing the processing characteristics of the DB-8 mkII but not requiring as many processing engines, the DB-4 MKII has the same functionality and algorithms as the DB-8 mkII. However it houses two processing engines and is capable of running two independent and simultaneous algorithms as well as LM6 radar monitoring. See:'TC Electronic Processors - DB4 MKII - Transmission processor'.