www.canford.co.uk

  • Next day delivery
    available
  • Free standard UK delivery
    on all orders over £100
  • Industry leading
    customer service
  • Free technical support
    from our team of experts

SENNHEISER RADIOMICS - XS Wireless series

Offered in a series of packages, these are 'high-quality', 'low-budget', presentation, vocal, and instrumental systems, 'offering reliable transmission and excellent sound quality'. The systems are 'quick and easy to set up' with automatic search for free frequencies and synchronisation via RF remote channel. 'Professional True Diversity technology guarantees optimum reception under any circumstances'. Systems are offered with dynamic and condenser hand-held transmitters in addition to belt-pack transmitters with either miniature body-worn or head-worn microphones or for use with electric instruments, such as guitars. Receivers may be mounted in a standard rack, using accessory hardware.

These systems are offered set for channel 38 (606 - 614 MHz), which is the range for licensed radio microphones and in-ear monitors in the UK. A licence is required to operate this equipment in channel 38. Up to date information should be available at www.jfmg.co.uk.

Twelve channels may be operated simultaneously in one location. Eight frequency 'banks' are available, each can have a maximum of twelve preset channels. Frequencies may be set manually, in steps of 25kHz, or by selecting a frequency bank and then a preset channel. The receiver may be used to scan for an unused channel within a frequency bank and select it. The settings selected on the receiver can then by transferred to the transmitter by pressing the sync button on the transmitter and then the sync button on the receiver. The receiver has adjustable squelch to reduce RF interference. Transmitters have mute buttons; the user can prevent the audio from being heard without intervention at the receiver or by the sound operator.

System performance:

Noise: Better than -103dB, A weighted. Distortion: Less than 1% THD. Operating time: 10 hours. Operating temperature: 0 to 40 degrees C.

EM 10 Receiver

Present in all the XS series systems, this is a diversity receiver, with two rear antennae which may be removed and mounted remotely. It is constructed in a metal housing, has both balanced and unbalanced output connections, and may be rack-mounted using accessory hardware.

On the front: Standby button. LCD display shows frequency, channel, bank, sync; RF and audio level on bar-graphs, battery charge status of transmitter; scan, preset, tune menu items; active antenna. 'Up', 'down' and 'set' buttons navigate the menu to set the frequency; a 'sync' button transfers the setting to a transmitter. Audio output level, rotary control adjusts both audio outputs.
On the rear: Antenna connectors, 2x BNC, 50 ohms. Audio outputs; 3-pin female XLR, balanced; 6.35mm jack socket, unbalanced; line/microphone switch. Squelch level, rotary control. DC power input, coaxial, with associated cable grip.

Sensitivity: Less than 3uV, for 52dB A RMS signal to noise. Adjacent channel rejection: 60dB. Audio frequency response: 60-16000Hz. Audio outputs: +14 dBu maximum, balanced, 3-pin XLR ; +8dBu maximum, unbalanced, 6.35mm jack. Power source: 12V DC nominal, 300mA. Dimensions: 200 x 127 x 42mm. Weight: 730g.

Included accessories: 2x rod antennae, manual, NT 2-3 AC power adapter.
Optional accessories: Rack-mounting hardware, GAM 1, GAM 2, GAM 3, see below.

SKM 65, SKM 35 Transmitters - Handheld

Both hand held transmitters are similar. The SKM 65 is fitted with a super-cardioid condenser capsule, to offer 'brilliant sound', the SKM 35 has a cardioid dynamic capsule offering 'the legendary e 835 sound' to 'cut through high on-stage levels', both offer 'high feedback rejection'.

On the body: LCD display panel shows frequency, battery capacity remaining. Mute button and LED. Power LED flashes when batteries are low. Input sensitivity control, slide switch. On/off button.
On the end: Sync button. Lower part of body unscrews to reveal battery compartment.

Frequency response: 80 - 16000 Hz, microphone. Sound pressure level: 144/149dB SPL maximum, SKM 65/ SKM 35. Power source: 2x 1.5V AA cells. Dimensions: 54 x 250 (diameter x length) mm. Weight: 240g approximately.

Included accessories: 2x AA cells, manual, transmitter pouch. MZQ stand-mounting microphone clip.

SK20 Transmitter - Body-pack

This is used in the three belt-pack systems; it may be used with condenser microphones or instrument pick-ups.

On the top: Audio input, for microphone or instrument; 3.5mm 3-pole jack, wired differently for microphone and line. Mute button and LED. Power LED flashes when batteries are low. Antenna, fixed whip.
On the sides: Input sensitivity control, slide switch. Sync button. On/off button.
On the front: LCD display panel shows frequency, battery capacity remaining.
On the rear: Belt clip, battery compartment.

Input voltage: 0.5V RMS microphone setting; 1.8V RMS line setting; both nominal at -30dB gain. Frequency response: 100-16000Hz, microphone, 60-16000Hz, line setting. Power source: 2x 1.5V AA cells. Dimensions: 96 x 66 x 24mm. Weight: 95g approximately.

Included accessories: 2x AA cells, manual, transmitter pouch.

XSW 65 Vocal Set System - Handheld - Super-cardioid condenser capsule

Aimed at singers, speakers and presenters, this package contains: One EM 10 receiver and one SKM 65 transmitter, each with included accessories as listed above.

XSW 35 Vocal Set System - Handheld - Cardioid dynamic capsule

Aimed at singers, speakers and presenters, this package contains: One EM 10 receiver and one SKM 35 transmitter, each with included accessories as listed above.

XSW 12 Presentation Set System - Belt-pack - With clip-on microphone

Aimed at speakers and presenters, this package contains: One EM 10 receiver and one SK 20 transmitter, each with included accessories as listed above; one ME 2-2 microphone.

Easily attached to clothing using the supplied clip, the ME 2-2 is an omni directional, condenser microphone. Sensitivity: 5mV/Pa. Sound level: 142dB SPL maximum.

XSW 52 Head Set System - Belt-pack - With head-worn microphone

Aimed at singers, speakers and presenters needing hands-free operation, this package contains: One EM 10 receiver and one SK 20 transmitter, each with included accessories as listed above; one ME 3 microphone.

Providing a 'crystal-clear sound even in noisy surroundings'. the ME 3 is a cardioid, condenser, head-worn microphone. Sensitivity: 1.6mV/Pa. Sound level: 150 dB SPL maximum.

XSW 72 Instrument Set System - Belt-pack - With instrument cable

Designed for guitars and instruments with a jack socket, this offers 'natural sound reproduction', the instrument connects directly to the body-pack transmitter. The package contains: One EM 10 receiver and one SK 20 transmitter, each with included accessories as listed above; one CL1instrument cable, fitted with a 6.35 mm mono jack plug to fit the instrument.

GAM 1, GAM 2, GAM 3 Rack Mounting Kits - For EM 10 receiver

The GAM 1 has two steel brackets, to mount a single EM 10 in 1U of a 19 inch rack. The brackets attach to the sides of the EM 10; they each have an aperture to take a BNC back-to-back connector, supplied, to mount the standard antennae on the front of the rack. Two BNC - BNC cables are included.

The GAM 2 has two steel brackets and two joining plates to mount two EM 10 receivers in 1U of a 19 inch rack. The brackets each attach to one side of the EM 10, the plates connect the two EM 10 receivers together in the centre. The brackets each have an aperture to take a BNC back-to-back connector, supplied, to mount two standard antennae on the front of the rack. Two antenna splitters and six BNC - BNC cables are included.

The GAM 3 has two steel brackets and two joining plates to mount two EM 10 receivers in 1U of a 19 inch rack. The brackets each attach to one side of the EM 10, the plates connect the two EM 10 receivers together in the centre. The brackets each have an aperture to take a BNC back-to-back connector, to mount two standard antennae on the front of the rack. Back-to-back connectors, antenna splitters and cables are not included.

Accessories

The antenna and RF distribution accessories for the Evolution G3 and G4 systems are compatible with the XSW series. See SENNHEISER RADIOMICS - Evolution Series - Accessories.

  Description Price (£) Add to basket
SENNHEISER 504938 XSW 65 VOCAL SET RADIOMIC SYSTEM Handheld, 606-630MHz, channel 38 ready   Stock code:
This item is discontinued. See the product page for suggested alternatives.
SENNHEISER 504933 XSW 35 VOCAL SET RADIOMIC SYSTEM Handheld, 606-630MHz, channel 38 ready   Stock code:
No longer manufactured. See the product page for suggested alternatives.
SENNHEISER 504918 XSW 12 PRESENTATION SET RADIOMIC SYSTEM Beltpack, 606-630MHz, channel 38 ready   Stock code:
This item is discontinued. See the product page for suggested alternatives.
SENNHEISER 504923 XSW 52 HEAD SET RADIOMIC SYSTEM Beltpack, 606-630MHz, channel 38 ready   Stock code:
This item is discontinued. See the product page for suggested alternatives.
SENNHEISER 504928 XSW 72 INSTRUMENT SET RADIOMIC SYSTEM Beltpack, 606-630MHz, channel 38 ready   Stock code:
This item is discontinued. See the product page for suggested alternatives.
SENNHEISER 504944 GAM 1 RACK MOUNTING KIT For 1x EM 10 receiver, includes cables and BNCs   Stock code:
No longer manufactured. Please contact Technical Support for advice on alternatives.
SENNHEISER 504945 GAM 2 RACK MOUNTING KIT For 2x EM 10 receiver, includes cables, BNCs, splitters   Stock code:
No longer manufactured. Please contact Technical Support for advice on alternatives.
SENNHEISER 505669 GAM 3 RACK MOUNTING KIT For 2x EM 10 receiver, NO cables, BNCs, splitters   Stock code:
No longer manufactured. Please contact Technical Support for advice on alternatives.