A preset mixer with ten mono inputs and four mono outputs, in a 1U rack mounting case. Any input may be routed to any of the outputs using switches behind a cover on the front panel. Uses include a multiple clean-feed generation, zone mixing and multiple stereo to mono conversion.
The inputs and outputs are electronically balanced, use XLR connectors and can be wired unbalanced. Each input has a gain control accessible through the front panel, with sufficient range to accommodate consumer and professional equipment at input and output.
||Greater than 20kohms, balanced
|Maximum input level:
|Common mode rejection:
||Greater than 60dB typically
||-8dBu to +18dBu
|Off-isolation / crosstalk:
||Greater than 90dB at 1kHz
||20Hz to 20kHz, +/- 0.1dBu, 600ohm load, 1kHz
||Less than 0.01%, 1kHz, 0dBu to +26dBu
||-86dBu RMS 22Hz-22kHz unity gain, ref +8dBu
||Less than 50ohms
|Maximum output level:
||110-120V, or 220-240V AC, 6W maximum, switchable
||480 x 108 x 420 (w x d x h) mm
Included accessories: Handbook, IEC supply cable with plug.
Optional accessories: RB-RK3 rear panel rackmount kit for reverse mounting.