Accessories for Evolution G3 and G4 wireless systems are available for handheld, plug-on and beltpack transmitters. These accessories include cables, powering, antennas, mountings, cables and more.
A passive, directional, antenna for transmission or reception, offering a 14dB front-to-back ratio, this can be mounted on a 3/8 inch thread of a microphone stand.
A passive omni-directional antenna for transmission or reception, this can be mounted on a 3/8 inch thread of a microphone stand.
An active antenna, incorporating a 24MHz bandwidth within a frequency range of 450-960MHz, the A12-AD has an integrated, booster amplifier to increase the signal by a minimum of 10dB.
AB 3 Antenna Booster
An antenna booster that adds 10dB of gain to compensate for signal-loss over longer runs of cable. Up to two AB 3 antenna boosters can be used for a single antenna feed. Available in six frequency bands.
AB 4 Antenna Booster
A range of six antenna boosters with differing operational bandwidths. This filtered, inline antenna adds 10dB of gain to compensate for signal-loss over longer runs of cable. Up to two AB 4 antenna boosters can be used for a single antenna feed. Terminations are by way of BNC connectors and is compatible legacy Evolution wireless systems along with ew300 G4 and ew500 G4 which have wider tuning bandwidths.
AM 2 - Antenna Cable Set
For mounting antennas on the front of a GA 3 rack adapter, this is a pair of cables with male BNC connectors to connect to the back of the rack-mounted device and panel-mounting female types to fit the pre-punched apertures in the rack-adapter blanking-plate. The rack-adapter blanking-plate is used when a single receiver or transmitter is to be mounted in a 19 inch rack.
ASA 1 Antenna Splitter
An active antenna-splitter that allows up to four diversity receivers to be fed by only two antenna. Two ASA 1 splitters can be combined to allow an 8 channel diversity system with only two antenna. Includes 8x BNC cables.
Designed for the Evolution G4 series, the ASA 214-UHF 4:1 active antenna-splitter allows up to four diversity receivers to be fed by only two antenna. Also compatible with Evolution G2 and G3 series. Can be rackmounted using the optional GA 3 kit. Covering a frequency range of 470 – 870MHz, up to two ASA 214-UHF splitters can be combined to allow an 8 channel diversity system with only two antenna. Includes 8x BNC cables and NT1-1 UK power supply.
ASA 3000 Antenna Splitter
A 16 channel active antenna splitter that can be utilised for eight dual receivers. Can be positioned on desk or rack mounted using the included 1U rack-mounting kit. Includes 2x telescopic antenna. Frequency range of 470-870MHz
ASP 212 Antenna Splitter
A passive two-way antenna-splitter with 2x two in and 2x one out. DC coupling can be used with a maximum of 0.3A. Compatible with frequencies within 30-950MHz.
BA2015 - Rechargeable Battery Pack
This contains two rechargeable NiMH cells and is inserted into the battery compartment instead of two standard AA cells. The battery pack has an integrated sensor which indicates the battery status and monitors temperature during recharging. It may be recharged using an L 2015 charger. Suitable for any Sennheiser Evolution G3 and G4 transmitter or receiver. Capacity: 1500mAh.
CC 3 System Case
Suitable for Evolution G3 and G4 components, this offers 'safe storage and transportation'. The 'robust' carrying case is made from 'durable' plastic.
DC 2 - External DC Power Adapter
This is an adapter which fits inside mobile radiomic transmitters and IEM receivers, replacing the batteries, using instead power from a camera or other DC source. A captive cable, 1.4 metres, is supplied unterminated, for connection to a power source 6-18V. For EW G2/G3/G4 and 2000 Series.
Telescopic antenna with BNC connection and swivel mount to allow better positioning. Covers 430-960MHz bandwidth.
GA 3 Rack Mounting Adapter
This can be used to mount one or two Evolution G3 and G4 series wireless monitoring transmitters, static radiomic receivers or the AC 3/AC 41-UK active antenna combiner in a 1U of a 19-inch rack. When a single device is to be mounted, a blanking plate is used for the other half of the rack width. This has two pre-punched apertures, filled with blanking plugs, which may be used in conjunction with the AM 2 antenna cable set to mount the standard antennas on the front of the rack, or to provide a convenient termination point for external antennas.
L 2015 - Battery Charger - Two-way
This is a convenient, quick-charging, automatic charger for two BA 2015 battery packs. The batteries are either inserted directly into the charger or remain in their bodypack transmitters or receivers of evolution wireless G3 and G4 100, 300 and 500 Series. Bodypack transmitters and receivers are automatically switched off when they are inserted into the L 2015.
The charger recognises a fully-charged battery and automatically switches to trickle charging. Temperature and voltage are monitored for increased safety, faults are detected automatically. Battery life is prolonged by over-charge protection and regeneration of exhausted batteries. Several charging units can be 'daisy-chained' and powered by one power supply unit. Charging time 2.5 hours, approximately. Power source: 10 - 20V DC, 400 - 750mA. Dimensions: 145 x 80 x 110 mm. Weight: 310g. Requires NT 1-1 or NT 3-1 power supply for AC operation.
LA 2 Charging Adapter
A charging adapter to allow charging of SKM-G3 or SKM-G4 handheld transmitters via an L 2015 battery charger.
A plug-in, 13.8V 2.0A AC/DC adapter for the ASA 1 antenna splitter and L 2015 charger, supplied with a UK AC connector.
Plug-in 12V 400mA AC/DC power adapter with UK AC connector. For all G1, G2, G3, G4 and XS Wireless fixed receivers.
Plug-in 12V 400mA AC/DC power adapter with EU AC connector. For all G1, G2, G3, G4 and XS Wireless static receivers.
Plug-in 12V AC/DC power adapter with UK AC connector. For antenna combiner AC 3 or up to three L 2015 chargers.
RMS 1 Remote Mute Switch
A remote mute switch that adds push-to-talk and push-to-mute functionality to an SK300-G3 or SK300-G4 beltpack transmitter.