A two-channel, low cost, stereo 'lipsync' audio delay for offline editing and monitoring, with a minimum of engineer set-up controls and no user-adjustable controls.
The inputs are balanced, line-level, or unbalanced, consumer level (500mV), auto-sensing, on XLR 3-pin female connectors. Output is balanced, line-level, on XLR 3-pin male connectors. The gain is adjustable via recessed controls -12dB to +12dB, accessible by screwdriver or trimpot tool.
The delay is user-adjustable from 850 micro seconds to 337 milliseconds in 1 millisecond steps, via recessed controls accessible by screwdriver or trimpot tool.
The unit is housed in a rugged, extruded aluminium case with protective end-bezels. Power input is 230V AC via a fused IEC inlet (mains cable not included).
||-12dB to +12dB, nominal
||500 ohms to 50k ohms
||-69dB RMS re. +6dBu output (20Hz-22kHz, 0dB gain, input terminated 600 ohms)
||0.03%THD (1kHz, +6dBu output)
||20Hz-20kHz +/- 1.8dB
||+10dBu (10k ohms load), +10dBu (600 ohms load)
||850 micro seconds to 337 milliseconds, adjustable in 1ms steps.
||230V AC +/- 10%, 6VA
||220 x 110 x 47 (l x w x h)mm.
Optional accessory: Steel clamp bracket 16-728 is designed to allow the unit to be fitted on the underside of work surfaces.
NOTE: This product is NOT suitable for programme chain use, it has been designed solely for use in edit suites and at editing workstations.