kr
€
£
kr
CHF
$

Canford

www.canford.co.uk

Selection information

Selection information Triax

Triax

Triax

BNC

Categories in BNC

BNC CONNECTORS - TERMINOLOGY AND TERMINATION
Used for applications including video, radio frequency signals, digital audio and test equipment the BNC connector has a long history. Impedance They are available in two impedances, 75 ohms and 50…
...view more
22 Products
NEUTRIK BNC CONNECTORS - Male cable types - Rear twist - HDTV
This range of high quality BNC connectors offers excellent mechanical and electrical performance and simple assembly. Precision machined components give true 75 ohm impedance and excellent…
...view more
14 Products
NEUTRIK BNC CONNECTORS - Male cable types - Push-pull - HDTV
A range of high quality BNC connectors, giving excellent mechanical, electrical and assembly performance. Precision machined components give accurate impedance and excellent return-loss, even at high…
...view more
16 Products
NEUTRIK BNC CONNECTOR TOOLS
A range of crimp tools, die sets and a spanner, required to assemble Neutrik Rear Twist and Push-Pull series BNC connectors. Crimp tool HX-BNC A high quality hand crimp-tool offering the…
...view more
10 Products
TELEGARTNER BNC CONNECTORS - Male cable types - HDTV
These high-performance, 75 ohm types, from a leading German manufacturer, have been developed specifically for HDTV applications. They have extremely low return loss, and are rated to 1000 mating…
...view more
25 Products
TELEGARTNER BNC CONNECTORS - Male cable types - Standard
Offered in crimp and solder termination, in 75 ohm and 50 ohm versions, these standard connectors, from a leading German manufacturer, are suitable for analogue and SD video applications, but may not…
...view more
34 Products
COAXIAL CONNECTOR STRAIN RELIEF BUSHES
Moulded plastic strain reliefs for use with BNC and MUSA crimp connectors. “Groups” refer to Canford Cable Groups, see Coaxial Connectors Selection Guidance entry. All types are long-bush designs…
...view more
13 Products
PALADIN COAXIAL CONNECTOR CRIMP TOOLS
A range of ratchet-action crimp tools with interchangeable die sets. All tools feature a fully-ratcheting cycle with safety release lever, six ratchet gear settings for adjustable crimping force, and…
...view more
4 Products
AMPHENOL BNC HD CONNECTOR - MALE CABLE TYPES - HDTV
These high-performance, 75 ohm types have been developed specifically for HDTV applications. They have extremely low return-loss, and are rated to 1000 mating cycles. The impedance-matched…
...view more
13 Products
AMPHENOL MINI BNC HD CONNECTOR - Male Cable Types - HD-SDI 3Gb/s
These are bayonet-coupling, 75 ohm types, 51% smaller than standard BNC connectors, allowing four times the packing-density. They are found on the rear of equipment with multiple connections such as…
...view more
10 Products
TROMPETER BNC CONNECTORS - Male cable types - HDTV
The Trompeter UPL2000 series are high-performance, true 75 ohm types that have been developed specifically for HDTV applications. They have extremely low return-loss, and are rated to 500 mating…
...view more
1 Products
TROMPETER BNC CONNECTOR CENTRE CONTACT CRIMP TOOL
Twelve point crimp-tool for Trompeter UPL2000 series BNC connectors. Ratchet action for secure closing of crimp. Application note: The outer braid is secured using a conventional hex crimp tool, see…
...view more
22 Products
CANARE BNC CONNECTORS - Male cable types - HDTV
Canare BNC connectors are true 75 ohm types, with impedance-matched performance characteristics, suitable for HDTV, SDI (serial digital) and analogue video. BCP-C types fully meet the requirements of…
...view more
24 Products
CANARE STRAIN RELIEF BUSHES
Silicon rubber strain-relief bushes for Canare BNC, RCA and F connectors. Note that these are not suitable for use with Canare slimline BNC types. CB03 suits Canford Group X size cables plus Canare…
...view more
6 Products
CANARE CRIMP TOOL
A Swedish-manufactured crimp tool with scissors ratchet action, emergency release lever, and adjustable crimp force. Die sets are ordered separately as required. These are a two-piece precision-fit…
...view more
14 Products
ICM BNC CONNECTORS - Male cable types - Compression fit
For RF applications, these 75 ohm connectors are typically used for RF distribution. They feature a nickel or gold plated solid brass body, with a solid hex nut for easy installation and 360 degree…
...view more
4 Products
AUDIOJOG CABLE TESTERS
These dedicated audio cable testers from cable-testing specialists CableJog offer manual and automated testing of cables, fitted with a variety of industry standard connectors, of up to nine…
...view more
2 Products
BNC FITTING TOOLS
Special tools to enable BNC’s to be fitted in, and removed from densely packed panels. Available in two lengths for standard BNC’s: 200mm and 300mm.
...view more
3 Products
BNC RESISTIVE TERMINATORS
BNC plugs incorporating a terminating resistor. 50ohm +/-1%, 75ohm+/-1% and “precision” 75ohm +/-0.1% suitable for HD-TV. Gold plated centre-contacts, nickel-plated bodies.
...view more
4 Products
ITT DIN 1.0/2.3 COAXIAL CONNECTORS
Push-pull coupling, sub-miniature 75 ohm coaxial connectors approved for use with the Miranda / N-Vision and other ranges of SD / HD and AES routers. Suitable for cable group X (Canford SDV, Belden…
...view more
2 Products
DANIELS CENTRE CONTACT CRIMP TOOL - Miniature coaxial connectors
Eight point crimp tool and contact positioner for miniature coaxial connectors, including DIN 1.0/2.3 types. Ratchet action for secure closing of crimp. Both the crimp tool and contact positioner are…
...view more
20 Products
BTX PROBLOX MULTIMEDIA CONNECTORS HD video/audio/control
A range of lockable multi-contact connectors, suitable for HD-SDI video, audio and control signals, accommodating up to 16 coaxial and 26 audio/control contacts. The design is based on the well known…
...view more
1 Products
CANARE BNC 75 OHM TERMINATORS
All 75 ohm signals, once entered into a termination, must be fully converted into energy. If the impedance matching is not perfect, part of this energy will be reflected and a poor return loss (VSWR)…
...view more
1 Products
TELEGARTNER BNC CONNECTORS - Female cable types
Solder type have compression gland with hex nut fixing.
...view more
14 Products
CANARE BNC CONNECTORS - Female PCB types - HDTV
These high-performance, precision 75 ohm types, are available in a variety of mounting options and PCB orientations, and are suitable for HDTV applications (SMPTE424M). They have an extremely low…
...view more
1 Products
TELEGARTNER BNC CONNECTORS - Female panel types - Back to back - 3Gb/s HDTV
3Gb/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analogue and Unbalanced 75ohm AES Audio High definition 75 ohm, in-line female-female cable adapter, with impedance-matched performance characteristics…
...view more
1 Products
BNC PANEL INSULATING WASHERS
Plastic insulating washers are available for panel mounting of un-insulated type BNC connectors. Panel hole diameter 17.0mm, for use with 12.8/13.0mm connectors. Washers are supplied singly, two…
...view more
1 Products
CANARE BNC CONNECTORS - Female panel types - Back-to-back - HDTV
75 ohm in-line female-female cable adapter, with same performance as connectors.
...view more
3 Products
CANFORD BNC CONNECTORS - Female panel types - Back-to-back - Insulated - 3Gb/s HDTV
3Gb/s 1080p HDTV, 1.5Gb/s 1080i HDTV, SDTV, Analogue and Unbalanced 75ohm AES Audio Panel-mounting double-sided BNC connectors (also known as “back-to-back” or “bulkhead through-adapter”), designed…
...view more
1 Products
CANFORD BNC KEY
It is often neccessary to fit BNC connectors in drilled, rather than punched, holes, without the anti-rotation flats that a punching tool would provide. Tightening up the locking ring becomes a…
...view more
11 Products
UNIVERSAL SERIES BNC CONNECTORS
These are based on two Canford custom moulded plastic components, and provide connectors which use the same (24mm diameter) panel mountings as the Neutrik ‘D’series XLR connectors, jack sockets and…
...view more
4 Products
SWITCHCRAFT BNC CONNECTORS - Universal series
BNC feedthrough connectors mounted in metal housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with connection panels, connection plates, wallboxes…
...view more
4 Products
SWITCHCRAFT BNC - RCA (PHONO) ADAPTERS - Universal series
BNC to RCA (phono) feedthrough adapters mounted in metal housings which fit the Neutrik ‘D’ series and Canford ‘Universal’ series cut-out. Suitable for use with connection panels, connection plates…
...view more
1 Products
D-SERIES BNC ADAPTER PLATE
Moulded plastic plates, similar to the Canford 40-991 D-series blanking plate, designed to accept a BNC connector. These fit into “Universal” 24mm punched holes, as used by Neutrik D-series XLR…
...view more
6 Products
NEUTRIK BNC CONNECTORS - Female panel types - Back-to-back - HDTV
A range of high quality BNC connectors, giving excellent mechanical, electrical and assembly performance. Precision machined components give accurate impedance and excellent return-loss, even at high…
...view more
2 Products
NEUTRIK DUST PROTECTION COVERS - For panel connectors
These dust protection covers can be used in Neutrik D-series size panel connectors when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when…
...view more
2 Products
TELEGARTNER BNC CONNECTORS - Female panel types - Back-to-back
Double-sided panel connectors, also known as "back-to-back" or "bulkhead through-adapter". These have BNC connectors on both sides of the panel. Single hole fixing. Panel hole diameter 13mm…
...view more
8 Products
CANARE BNC CONNECTORS - Female panel types - Back-to-back
Available for single-hole fixing (double “D” profile, diameter 11.2mm with two flats on opposite sides 9.6mm apart), in both BNC-solder and BNC-BNC (“back-to-back”) types. Both are uninsulated from…
...view more
19 Products
BNC ADAPTERS
Designation denotes configuration of adapter contacts, all adapters supplied pre-wired. ‘T’ adapters act as splitters/combiners. Terminology used in adapter descriptions: BNCF:BNC female BNCM:BNC…
...view more
1 Products
BNC ADAPTERS SET
A set of BNC adapters, in a foam lined, plastic transit case, is also available. Contains adapters as follows: BNCF-BNCF 50…
...view more
5 Products
ICM COMPRESSION CONNECTOR CRIMP TOOLS
A range of tools that are designed to service the various ICM ranges of compression connectors. ICM CPLCCT-SLM Standard compression tool The ICM CPLCCT-SLM compression connector crimp tool is…
...view more

Please select from the list of categories above

See all new products New products