A carefully selected range of loudspeaker cables from leading brands including Canford and Belden.
Copper foil tape, 18mm wide, 0.1mm thick (1.8mm²), insulated with 0.05mm thick Melinex tape bonded to the foil. Approximate resistance 1ohm/100m. Specifically intended for…
A cable specifically manufactured for use in 100 volt line loudspeaker system installations. The cable has two twisted cores of 16/0.2mm (0.5mm sq.) tinned copper wire, with…
Economical 2-core 0.75mm² and 1.5mm² cables designed specifically for exterior use, for both low impedance and 100 volt line loudspeaker systems. The construction is similar to a…
Highly flexible two core large conductor loudspeaker cables, in 2 different cross section sizes. These feature ultra fine wires of high purity oxygen-free copper, laid up in a…
General purpose loudspeaker cables similar in construction to 2-core (GPS 2-core) and 4-core (GPS 4-core) mains cables, but manufactured specifically for use as loudspeaker feeds…
General purpose loudspeaker cables similar in construction to 2-core (GPS-LFH 2-core) and 4-core (GPS-LFH 4-core) mains cables, but manufactured specifically for use as…
General-purpose loudspeaker cable similar in construction to GPS, but with reduced insulation thickness and reduced overall jacket diameter, making this cable not only a little…
Two and four-core 2.5mm² cross section extra-flexible multicore cable for loudspeaker wiring. Core pairs are colour coded using the resistor colour code as there is no standard…
Two, four and eight-core 2.5mm sq. cross section multicore cables for fixed installation loudspeaker wiring when Low Fire Hazard (‘LSOH’) designs are specified. Core pairs are…
Two, four and eight-core 4mm sq. cross-section extra-flexible multicore cable for loudspeaker wiring. Core pairs are colour coded using the resistor colour code as there is no…
Two and four-core, 4mm sq. cross section multicore cables for fixed installation loudspeaker wiring when Low Fire Hazard ('LSOH') designs are specified. Core pairs are…
Two core 1.5mm sq. cross section loudspeaker cables, complying to the CPR Euroclass requirements up to B2ca. Oxygen free bare copper stranded conductors offer high conductivity…
Two core 2.5mm sq. cross section loudspeaker cables, complying to the CPR Euroclass requirements up to B2ca. Oxygen free bare copper stranded conductors offer high conductivity…
Four core 2.5mm sq. cross section loudspeaker cables, complying to the CPR Euroclass requirements up to B2ca. Oxygen free bare copper stranded conductors offer high conductivity…
Two core 4.0mm sq. cross section loudspeaker cables, complying to the CPR Euroclass requirements up to B2ca. Oxygen free bare copper stranded conductors offer high conductivity…
There are a very large number of possible combinations of cables that may be required in a 'combined' lay-up. These might be in an 'as flexible as possible' format, with a very…
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
