A carefully selected range of video, data, KVM extenders - wireless, cable, fibre from leading brands including Muxlab and Gefen.
A selection of Muxlab wallplate interfaces that have been designed to be compatible with standard single or dual-gang back boxes - some with Decora faceplates. The interfaces…
Used in pairs, these useful devices (usually known as baluns in the data world) allow the transmission of audio and video signals on existing UTP and FTP structured wiring…
A selection of products from Muxlab that have been designed to better allow the transfer of video over SDI. 500701 HD-SDI video Each balun has a 75 ohm, male, BNC connector…
These two-part devices extend VGA video signals over a single Cat5E cable up to 100 metres.
These video extenders offer transport of a single DVI video signal over SC fibre up to 1000 metres or a dual link DVI connection up to 330 metres of SC fibre or a DVI signal over…
The Gefen DVI Detective and HDMI Detective models record the Extended Display Identification Data from a monitor, used to communicate to computers the array of video resolutions…
MuxLab HDMI point to point video extenders have been designed to facilitate the transfer of data from compatible 3G, 6G, or HDMI equipment over Cat5e/6 to distances up to 150m…
MuxLab video extenders are available in point to point, point to multi-point, and multi-point to multi-point configurations, facilitating the transfer of data from compatible…
A range of MuxLab accessories to aid installation of hardware devices into studios, offices, and control rooms. 500905 Rackmount chassis, 1U A 19-inch, 1U rackmount chassis…
Providing a means of extending USB or RS232 signals over Cat5 or fibre cables, depending on model, these devices are used most commonly to connect remotely-sited peripherals to a…
Lusem's 'OxLinx' series, active, optical HDMI cables are intended for applications where longer cable-run lengths than those obtainable with standard copper HDMI cables are…
With applications including video production, broadcasting, OB vans, studio-to-studio, live events and medical imaging display, these video extenders have been designed to extend…
LYNX yellobrik OTX 1712 or OTX 1742 CWDM ('Coarse Wavelength Division Multiplexing') transmitters, combined with an ORX 1702 receiver, overcome the restrictions involved in the…
RCT 1012 is part of the yellobrik range of modules from Lynx Technik. It is designed to control up to twelve yellobrik modules from a single Ethernet port, enabling a more…
OTR-1441 and OTR-1442 are self-contained, single-fibre, transmission systems for the transport of 4K (12G uncompressed) video, split over four separate 3G HD-SDI links, with…
A range of fibre optic SFP modules which may be fitted to Yellobriks equipped with an SFP cage. They provide single mode or multimode fibre extension for SDI, AES and analogue…
Designed to combat the restrictions involved with the distribution of uncompressed, broadcast-quality, video signals over long distances, these modules, part of the yellobrik…
These modules, part of the yellobrik range manufactured by Lynx Technik, extend electrical communications circuits over distances of up to 10km using fibre optic cables. The range…
Designed to distribute MADI 64-channel audio over long distances, these modules, part of the yellobrik range manufactured by Lynx Technik, extend MADI circuits over distances of…
Canford Audio Limited is registered in England and WalesCompany registration no: 1385727VAT no: GB 660116371
