kr
€
£
kr
CHF
$

Canford

www.canford.co.uk

XLR blanking plates

XLR blanking plates

XLR connectors, miniature

XLR connectors, miniature

XLR connectors

Categories in XLR connectors

38 Products
NEUTRIK XLR CABLE CONNECTORS - XX series
The Neutrik XX series is the successor to the 'industry standard' X series XLR cable connector, and offers several new features. It is available in 3, 4, 5, 6 and 7 pin configurations, with silver or…
...view more
6 Products
NEUTRIK XLR CABLE CONNECTORS - XX-14 series
A version of the XX series for use with larger cables, up to 8.5mm diameter. These have a larger chuck and special gland. The gland and chuck are also available as an accessory, BXX-14, for use with…
...view more
8 Products
NEUTRIK XLR CABLE CONNECTORS - XX-HA series - Crimp
A version of the XX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The contacts are fitted onto…
...view more
2 Products
NEUTRIK XLR CABLE CONNECTORS - XX-HE series
A version of the XX series for use when style is important, these have a sexy, velour, chromium-plated shell. They also differ from the main XX series in having an extra-high temperature resistant…
...view more
4 Products
NEUTRIK XLR CABLE CONNECTORS - XX-CRYSTAL series
An eye-catching version of the XX series, the CrystalCon series have Swarovski 'crystallized' elements embedded into the body. They have a black shell and gold contacts. Each connector is supplied in…
...view more
3 Products
NEUTRIK XLR CABLE CONNECTORS - XX-EMC series
A version of the XX series designed specifically to give enhanced RF screening, for example in live performance, critical recording or where there are particular local problems with radio…
...view more
2 Products
NEUTRIK XLR PANEL CONNECTORS - Cable style, surface mount - EMC shielded
The EMC-XLR Series is a specifically designed version of the XX series to give enhanced RF screening for critical applications in live performance and recording where there are particular problems…
...view more
4 Products
NEUTRIK XLR CABLE CONNECTORS - XX-HD Series
The XX-HD series are heavy duty XLR cable connectors for outdoor use. The all metal design is dust and water protected to IP67 when mated with XX-HD cable connectors or MPR-HD chassis connectors…
...view more
12 Products
NEUTRIK XLR CABLE CONNECTOR GLANDS - XX series
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands supplied with connectors are black as standard, but are available with colour flashes for…
...view more
11 Products
NEUTRIK XLR CABLE CONNECTOR RINGS - XX series
Colour coding rings are available to fit over the shell at the base of the gland, and are 6mm wide. They are suitable for use with standard 6mm wide labelling machine tapes. A transparent version…
...view more
1 Products
NEUTRIK ASSEMBLY TOOLS For XX series XLR and X series jack plugs
Hand tools to aid assembly of the Neutrik XX series XLR connectors and X series jack plugs. They grip the gland securely, and enable it to be firmly tightened down onto the connector shell.
...view more
1 Products
NEUTRIK ASSEMBLY TOOL For XX series XLR
A bench tool to press-fit the cable gland onto XX series XLR connectors.
...view more
32 Products
NEUTRIK XLR CABLE CONNECTORS - X series
The “industry standard” XLR cable connector, easy to assemble and check in the field, with only 4 parts and no screws. Contact block is fibreglass reinforced hard plastic, inserted from rear of…
...view more
2 Products
NEUTRIK XLR CABLE CONNECTORS - XY series
Cable connectors with nickel plated shell and silver plated contacts. These use the same shell, strain-relief etc as the X-series, with insulation displacement connections (pins 2, 3) for field…
...view more
2 Products
NEUTRIK XLR CABLE CONNECTORS - XCC series - Digital
A version of the X series designed specifically for the transmission of digital signals. The female connector features a coaxial ground spring which gives an accurate connection to the mating shell…
...view more
10 Products
NEUTRIK XLR CABLE CONNECTOR GLANDS - X series
Glands with polyurethane strain reliefs give high protection to the cable against bending stresses. Glands are black as standard, but are available in nine colours as accessories.
...view more
10 Products
NEUTRIK XLR CABLE CONNECTOR RINGS - X series
Colour coding rings are available to fit over the shell at the base of the gland, and incorporate a flat area 10mm × 6mm which can be engraved or accommodate a label. They can be fitted…
...view more
6 Products
NEUTRIK XLR CABLE CONNECTORS - X-HD Series
Heavy-duty, environmentally protected FX and MX. The FX-HD has a diecast zinc shell and one piece neoprene jacket with sealing lips, to protect the shell and latch mechanism from ingress of dirt and…
...view more
3 Products
NEUTRIK XLR CABLE CONNECTORS - Switched and locking
FXS A modified version of the 3FX socket, this incorporates a rotary switch with positive click action, labelled “on” and “off”. “Off” position shorts pins 2 and 3. FX-SPEC Positive locking version…
...view more
22 Products
NEUTRIK XLR CABLE CONNECTORS - RX series
The RX Series is the right angle version of the XX cable connector series. The successor to the RC series, they offer several new features which make it easier to assemble and to have improved…
...view more
2 Products
NEUTRIK XLR CABLE CONNECTORS - ConvertCon
The ConvertCon is a 'unisex' 3-pin connector, that converts between male and female by sliding the housing along the body. It is designed for emergency applications, avoiding the need for…
...view more
30 Products
NEUTRIK XLR PANEL CONNECTORS - D-L series
Universal metal-bodied housing common to most Neutrik connector ranges allows simpler metalworking and more flexibility of use. Panel cutout 24mm, connector can be mounted front or rear of panel…
...view more
7 Products
NEUTRIK XLR CABLE CONNECTORS - RC series
Compact, low-profile, right-angled connectors. Contact assembly can be set at 45° intervals relative to the cable entry housing, giving a total of seven possible positions of the contacts relative to…
...view more
36 Products
NEUTRIK XLR PANEL CONNECTORS - D-LX series
The new D-LX series is the next generation development from the long-established D-L series, and features a compact all metal housing with an ingenious duplex ground contact, which offers excellent…
...view more
5 Products
NEUTRIK XLR CABLE CONNECTOR CAPS - RC series
Coloured caps that snap over the covers of right-angled connectors are also available. These may be used for circuit identification, and can be engraved if required.
...view more
8 Products
NEUTRIK XLR PANEL CONNECTORS - D-LX-HA series - Crimp
A version of the D-LX series with crimp contacts instead of the usual solder types. The crimp termination is with the standard 'B-crimp' tool (IEC standard IEC 60352-2). The contacts are fitted onto…
...view more
2 Products
NEUTRIK XLR PANEL CONNECTORS - D-S series
Similar to the D-L series, but with screw terminal connection in place of the solder cups. Cable range 0.128 sq.mm - 0.52 sq.mm. Black shell with gold-plated contacts.
...view more
2 Products
NEUTRIK XLR PANEL CONNECTORS - PP series - Plastic D series
Universal housing plastic shell connectors, without latch. Effectively these are plastic D-series connectors. Panel cutout 24mm, connector can be mounted front or rear of panel. Available in 3 pin…
...view more
20 Products
NEUTRIK XLR PANEL CONNECTORS - P series
Traditional style panel mount connectors. FP has 25mm panel cutout and latch which is pressed towards the panel to release. MP has 20mm panel cutout and both types are for front-of-panel mounting…
...view more
3 Products
NEUTRIK XLR PANEL CONNECTORS - PR-HD series
Sealed male XLR panel connectors, specifically for use with Neutrik X-HD cable connectors to achieve a dust and water ingress sealing to IP65 rating. They have gold plated contacts in a nickel…
...view more
59 Products
NEUTRIK XLR PANEL CONNECTORS - A series
Plastic bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The A series offers low cost basic…
...view more
20 Products
NEUTRIK XLR PANEL CONNECTORS - AA series
These are a lower cost version of the Neutrik A series plastic-bodied XLR panel connectors from Neutrik. They have the smallest size and highest packing-density (23mm between centres). The AA series…
...view more
3 Products
NEUTRIK XLR PANEL CONNECTORS - PRH series
Plastic shell economically priced PCB mount connectors. Mounting holes compatible with D and G series. NC3FPRHWith latch, gold plated contacts. NC3FPRH-0With spring retention (instead of latch)…
...view more
30 Products
NEUTRIK XLR PANEL CONNECTORS - B series
Metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres, except HL and HR type 25.5mm). The B series offers low cost ultra-basic…
...view more
48 Products
NEUTRIK XLR PANEL CONNECTORS - BA series
These are a lower cost version of the Neutrik B series metal bodied XLR panel connectors from Neutrik, these have the smallest size and highest packing density (23mm between centres). The BA series…
...view more
26 Products
NEUTRIK XLR PANEL CONNECTORS - D series
FD-H and MD-H Universal metal-bodied housing series, for PCB mount applications. Designed for use where connector is mounted such that connector enters horizontally and PCB is horizontal, ie angled…
...view more
2 Products
NEUTRIK XLR PANEL CONNECTORS - Cable style, surface mount
These are special hybrid connectors which offer a cable style contact section mounted on a 'D' series mounting flange. They can be front or rear mounted, and have a black finish with silver plated…
...view more
2 Products
NEUTRIK XLR PANEL CONNECTOR FEED-THROUGH ADAPTERS
These feed-through 3-pin XLR adapters are mounted on a 'D' series mounting flange. NA3FDM has female contacts at the front and male at the rear, overall length 57mm. NA3MDF is not a wooden version…
...view more
2 Products
NEUTRIK XLR PANEL CONNECTOR ADAPTERS - D series - Screw terminal and IDC
These PCB adapter modules allow 4 and 5-pin D-series XLR panel connectors to have screw-terminal or IDC connections. The IDC terminals, which accept wires with 0.50mm - 0.64mm conductors and…
...view more
24 Products
NEUTRIK XLR AND JACK COMBINED CONNECTORS - I series - Panel type
Many pieces of equipment have two input connectors – a 3 pin XLR, low impedance balanced, often for microphones, and a 2 or 3 pole 6.35mm jack, usually high impedance unbalanced. In almost all cases…
...view more
6 Products
NEUTRIK XLR AND JACK COMBINED CONNECTORS - A series - Panel type
These second-generation, XLR / jack hybrid panel-mount connectors combine a 3-pole XLR female and 6.35mm 3-pole (stereo) jack socket in one XLR plastic housing, to give a space-saving combination…
...view more
1 Products
NEUTRIK IN-LINE HOUSING
A two-part rectangular profile extruded case which enables custom adapters to be assembled. It accepts any D-series connector from Neutrik or Canford at each end. The two sections interlock, and are…
...view more
4 Products
NEUTRIK HINGED COVERS
These hinged covers are suitable for all Neutrik D-series and Canford ‘Universal’ series connectors, and seal them, when unmated, from dust and water ingress to IP42. There is a recess on the cover…
...view more
2 Products
DELTRON XLR TYPE CONNECTORS
Assembly of the plugs and sockets is achieved by a few quick turns of the back shell. Generous solder buckets enable easier termination and cater for larger conductor sizes, the strain relief collets…
...view more
2 Products
NEUTRIK PHOENIX-STYLE PANEL CONNECTORS - A series
These are 3-pin male-contact PCB-mounting connectors in a Neutrik A series housing, which mate with the Phoenix 3-pin screw terminal block connector. They have the same PCB footprint as the Neutrik A…
...view more

Please select from the list of categories above

See all new products New products