Description
AUDIO TECHNICA MICROPHONES
Audio Technica have worked at the forefront of audio transducer technology for over 30 years, with microphones in use in studios and on stage throughout the world. The following types are offered from stock, with the remainder of the range generally available on short delivery to special order. Unless otherwise indicated, all microphones are 200 ohms. Full brochures are available on request.
PRO 41
A cardioid, moving coil, low impedance (300 ohm) microphone with nominally flat response for general purpose usage. Offering a “high performance to cost ratio”, it is supplied with 4.5 metre cable (XLR-XLR), mic-clamp and thread adapter. Weight 304g.
PRO 25ax
Fitted with a hyper-cardioid capsule, this is a high sound level type specifically developed for instrument pick-up. With a short body to aid positioning in tight situations such as amongst a drum kit, the microphone has a nominally flat response making it suitable for general purpose use. An isolation clamp is supplied. Weight 270g.
MB2k
Wide range moving coil dynamic mic with cardioid pickup pattern, featuring high output Neodymium magnet and silent lockable magnetic switch. Designed specifically for close up vocal and instrument use with crisp high frequency response and extended low frequency response. Double shock mounting ensures minimal handling noise. Enclosed in rugged die-cast housing and finished in a special baked-on durable coating. Supplied with slip-in mic clamp for 5/8" - 27TPI thread fitting and protective carrying case. Weight 337g.
MB3k
Including above features but specifically designed for demanding recording and re inforcement situations. Supplied with slip-in mic clamp for 5/8" - 27TPI thread fitting and protective carrying case. Weight 340g.
AT803b
Miniature lavalier omnidirectional condenser microphone ensuring high intelligibility for reinforcement and recording. Wide range 30-20000Hz makes it equally useful for vocal or instrument use. Powered by 1.5V battery or 9-52V phantom power. Supplied with 1.85m cable permanently attached to pre-amplifier/battery box and with clothing clip, windscreen, battery and protective case. Mic weight 2.5g, pre amp module 147g.
AT8015
A wide range fixed charge electret condenser ‘shotgun’ microphone with a 40° acceptance angle for long distance sound pick-up. Commonly used in the recording, broadcast, sound reinforcement and film/TV sound industries, this low impedance unit is phantom powered (11-52V DC) and has a very high S.P.L. of 132dB before distortion and a nominal bandwidth of 40-20000Hz (100-20000Hz in roll off position). Snap-in stand clamp, foam windshield and protective vinyl case are included. Length 465mm. Weight 200g.
AT8033
Cardioid condenser microphone, for sound reinforcement, recording and broadcast. Requires 11-52VDC phantom, or AA size alkaline battery (life >1200 hours). Supplied complete with stand clamp and windshield. Weight 150g.
MB4k
Slim bodied cardioid condenser microphone for vocal, instrument or reinforcement applications. Fitted with non-lockable on/off switch and powered by 1.5V battery or 9-48VDC phantom power. Low handling noise, high gain before feedback and good rejection of background noise. Supplied with 5/8" - 27TPI thread microphone clamp and protective carrying case. Weight 182g.
AT831R
A miniature cardioid condenser microphone designed for high quality close up miking of voice and instruments. A 2 micron gold vaporised miniature diaphragm provides excellent frequency and transient response and reduced distortion. 7.6m cable to AT8538 pre-amplifier (supplied). Dimensions 20.5mm x10.0mm diameter. Requires 9-52V DC phantom power. Supplied complete with lapel clip, AT8444 guitar mount, AT8417 clothing clip, AT8116 windscreen and protective carrying case.
MT830R
A subminiature omnidirectional condenser microphone intended for unobtrusive use. With an almost flat frequency response from 30-20,000Hz, a maximum input level of 131dB SPL and a dynamic range of 107dB (typical) the MT830R ensures clean, accurate reproduction of speech and musical instruments. Supplied with clothing clip, 7.6m cable, AT8533 pre-amplifier with XLR3M connector and foam windshield. Dimensions: 15.8 x8.5mm, colour black.
ES945/ES947
Balanced, low impedance fixed charge condenser boundary microphones designed for unobtrusive installation in ceilings, panels or tables up to 65mm thick. ES945 is omnidirectional (hemispherical) while ES947 is cardioid in a hemisphere above the fixed surface, with the front marked by the Audio Technica symbol. Mounting is by a 24mm diameter hole using two supplied isolators (21mm diameter without isolators) with only 30mm diameter, 10mm height appearing above the surface. Overall length 80mm. Frequency response 30-20000Hz, sensitivity 7.9mV/Pa. Requires 9-52V phantom power with integral 3-pin XLR/M type. Available in black (ES945 and ES947) or white (ES945W and ES947W).
U853A/U853AW
These ultra-miniature microphones are designed for inconspicuous pick up, particularly when hanging from their own cable (over choirs or orchestras) using the matching wire hanger. The response is nominally “flat” from 30-20000Hz (80Hz roll-off switchable), with a high maximum input of 133dB making it suitable, in addition, for “show relay” purposes. The supplied cardioid condenser capsule requires 48 volt phantom power or battery powering. The capsule is interchangable, and other capsules (UE-H hypercardioid (100°); UE-O omnidirectional (360°); UE-UL UniLine (90°)) are also available to special order - contact Sales. A 7.6m cable leaves the mic body which connects to the power module with a miniature QG style plug. The mic is supplied with two-stage windshield, desk stand adapter, and hanging adaptor. The U853A is black, the U853AW is white. Weight 14g (less cable and PSU), 153g total.
ATR4697
Intended primarily for tabletop use, these omnidirectional boundary layer condenser microphones are an ideal solution for meetings or teleconference purposes that require a low profile, self-powered microphone. The response is nominally “flat” from 50-15000Hz, making it more than suitable for voice recording. Impedance 1000ohms. The unit is powered by an internal LR44 type 1.5V battery (supplied) and it’s rugged housing contains a power switch on the bottom, to conserve battery life (nominally 1000 hours). A 1.5m fixed cable is terminated with a miniature 3.5mm jack. The mic is supplied with a 3.5mm to 6.35mm 2-pole jack adapter and LR44 type battery. The ATR4697 is black. Weight 48g.
Note: The unit can only be powered by the internal LR44 type battery and can NOT use 48 volt phantom power. Replacement LR44 type batteries are available seperately (see Index for Special Purpose Batteries).
U859QL
Wide range condenser gooseneck microphone, supplied fitted with cardioid pattern capsule. Ideal for all presentation situations where a slim gooseneck is desirable. With an XLR/M insert in its base, it can be plugged directly into a panel mount XLR/F or to a standard microphone cable. The capsule is interchangable, and other capsules (UE-H hypercardioid (100°); UE-O omnidirectional (360°); UE-UL UniLine (90°)) are also available to special order - contact Sales. Powered by 11-52VDC phantom, the double gooseneck construction allows accurate positioning whilst avoiding the ‘droop’ problem sometimes present on such slim goosenecks. Fitted with roll-off switch and finished in reflective black. Supplied with two stage foam windscreen. Length 480mm. Weight 152g.
ES935/ML
This small diameter 290mm single gooseneck is designed for professional presentation and broadcast applications. The supplied ‘MicroLine’ element restricts sound pickup from 90° reducing unwanted sidenoise. XLR/M base for direct fitting to XLR/F panel mount or standard microphone cable. Powered by 9-52VDC phantom. Includes a surface mounting shockmount. Weight 80g. Roll-off switch fitted to pre-amp module. Supplied with two stage foam windscreen.
AT8010
Omnidirectional condenser microphone, for interview, sound reinforcement, instrumental pickup, recording and broadcast. Requires 11-52VDC phantom, or AA size alkaline battery (life >1200 hours). Supplied complete with stand clamp and windshield. Weight 165g.
AT8004
This handheld omnidirectional moving coil dynamic microphone is specifically designed for use in professional recording and broadcast applications and is equally suitable for high quality reinforcement situations. With its diecast case and hardened steel grill, this rugged unit is especially useful in field applications. Internal shockmounting minimises handling noise. Supplied with snap-in stand clamp and protective vinyl case. Weight 213g.
AT8022
This stereo microphone uses a coincident capsule configuration to produce an X/Y stereo image, and with its diecast case and hardened steel grill, this rugged unit is especially useful in field recording and is equally suitable for interviews and video camera-mount use (supplied with both pro and consumer adaptor cables - see below). Switchable low frequency high pass filter. 11-52V DC, 2mA phantom power or battery powered (1 x AA type). 7 hours use (typical). Supplied with two adaptor cables (2 x 3-pin XLR Male balanced and 3.5mm 3-pole minijack variations), AT8405a snap-in stand clamp, windscreen, battery and protective vinyl case. Weight 247g.
AT4033aSM
Transformerless cardioid capacitor microphone for the most demanding studio applications. Equally suitable for vocal/instrument recording or on-air presentation. High SPL of 145dB, or 155dB with fitted 10dB pad switch. Extremely low self noise of 17dB SPL. Its fixed charged, back plate permanently polarised construction with gold plated “Aged Diaphragm” give exceptional signal-to-noise ratio. Fitted with 80Hz Hi-pass filter switch. Supplied complete with AT8449 shock-mount suspension in protective carrying case. Weight 380g.
AT8449
Shockmount for above to fit any 5/8"- 27TPI thread stand.
AT4050/SM
Transformerless large diaphragm studio condenser microphone with switchable omni/cardioid/figure-of-8 patterns and two gold plated “aged diaphragms” for consistent long term performance. 10dB pad and 80Hz high pass filter switches are also provided. Supplied complete with shock mount. Foam windshield AT8137 available separately.
AT4041
A pressure-gradient capacitor microphone with a uniform cardioid polar pattern. The frequency response extends from 20-20,000Hz with a slight rise in the high frequency region. The transformerless output gives low self noise and high output, up to 145dB SPL, and the low mass “aged” diaphragm improves transient response and reduces handling and mechanical noise. Turned brass 21mm diameter matt black housing. Recessed high-pass filter (80Hz, 12dB/oct). Requires 48V (±4V) phantom power. Weight 120g. Supplied complete with stand clip, foam windshield and protective carrying case.
PRO 8HE
This inconspicuous head-worn mic has been developed for speech applications. The headband may be worn at the back of the head, the strong but lightweight construction ensuring a comfortable yet firm fit. The flexible boom is fitted with a low impedance, dynamic, hypercardioid capsule with response optimised for close positioning. A fixed 2.2 metre lead is fitted with belt clip and XLR male connector. Weight 60g.
ATM75/ATM73a
A miniature condenser microphone with cardioid pattern fitted to a headworn support system. Adjustable gooseneck fitting allows either side wearing with accurate positioning of the microphone for optimum results. Ideal for performers or broadcast and commentary applications. High gain before feedback with excellent suppression of background noise. Light and comfortable for long periods of use. The microphone capsule is fitted with a moisture barrier, and the coated stainless steel headband and durable cable assembly make the unit reliable in adverse operating conditions. Powered by 1.5V battery or 9-52VDC phantom the unit is permanently fitted by a 1.4 metre cable to the pre-amplifier/battery module with roll-off switch, which has a clip for belt fitting. Supplied with large and small windscreens and cable-tidy clothing clip. Microphone weight 60g, pre-amplifier 147g. ATM73A is similar, optimised for high SPL in P.A. use.