The Credenza has been designed specifically for audio-visual applications, and is a fully-open frame for mounting 19-inch equipment, useful where easy access to cabling and equipment is needed frequently. Finished in black epoxy-powder paint, it is available in four heights, two of which will fit under many work surfaces and consoles.
The 503 is supplied as a rigid frame with four 19-inch adjustable mounting-angles, which may be positioned freely within the rack. Three earth-bonding links are included, and a set of castors for easy movement. In addition, four adjustable feet can be brought into use, once the rack is positioned, for additional stability if required.
Available in four sizes; 10U, 12U, 16U and 22U heights, 550mm width and 500mm depth with the ability to hold up to 70kg of equipment. The mounting angles can be adjusted to give a maximum spacing, face to face, of 450mm. Overall height: 10U - 549mm, 12U – 638mm, 16U – 816mm, 22U – 1082mm.
Accessories
The 503 will accept the majority of 19-inch equipment. Enclosure Systems offer modem shelves (mount on front mounting-angles of a rack. 250mm depth have 2U height, 400mm depth have 4U height) and fixed ventilated shelves (which attach to the front and rear mounting angles), all finished in black.
Side and Top Panels
By adding these optional wooden side and top panels, the Credenza is transformed from an open rack suitable for equipment areas, into a very pleasing cabinet which would not look out of place in a conference or presentation room, post production suite or even an exhibition stand (you may have spotted them on our show stands!) The ash veneer panels are secured to the metal rack frame by the supplied 'hook and loop' strips and can be easily removed for access to equipment. The rear of the rack is left open to ensure adequate ventilation and cooling. Top covers fit any of the 500mm deep models; side panels are offered to fit 22U, 16U and 12U, 500mm deep types.
Other veneer finishes are available to special order subject to minimum order quantity.