Description
MUXLAB CAT5E AUDIO AND VIDEO ADAPTERS
Used in pairs, these useful devices (usually known as baluns in the data world) allow the transmission of audio and video signals on existing UTP and FTP structured wiring systems, either as part of a permanent installation or for a temporary rig, possibly avoiding the need for special cable runs.
All of this series are passive devices and are housed in compact plastic boxes. The Cat5 connection is normally an RJ45 socket, a few units have screw terminal connections.
All types are priced and sold SINGLY, these units must be used in pairs with one device at each end of the cabling.
Audio
500028
Two mono or one stereo high quality line-level audio circuits, via two RCA(phono) plugs on flying leads for direct connection to equipment. Bandwidth 20Hz-20kHz, -3dB. May be used stereo or as two mono channels in opposite directions simultaneously. Maximum transmission distance with 24AWG Cat5E UTP is 1km.
500033
Four mono or two stereo line level audio circuits, via four RCA(phono) sockets. Bandwidth up to 300m transmission 60Hz-20kHz, -3dB. Bandwidth up to 1.5km transmission 100Hz-20kHz. May be used with signals passing in opposite directions simultaneously. Maximum transmission distance with 24AWG Cat5E UTP is 1.5km.
500027
A dual channel unit that allows one stereo unbalanced analogue audio signal to be transmitted over Cat5E cable. The audio connection is via RCA(phono) plugs on short tails. Bandwidth up to 300m transmission 60Hz-20kHz, -3dB. Bandwidth up to 1.5km transmission 100Hz-20kHz.
500030
A dual-channel unit that allows one stereo unbalanced analogue audio signal to be transmitted over Cat5E cable. The audio connection is via a 3.5mm stereo jack plug on a short tail. Bandwidth up to 300m transmission 60Hz-20kHz, -3dB. Bandwidth up to 1.5km transmission 100Hz-20kHz.
500019
A single channel unit that allows one unbalanced analogue audio signal to be transmitted over one pair of a Cat5E cable. The audio connection is an RCA(phono) plug, the Cat5E pair via screw terminals. The unit is designed in a very compact housing to allow it to be plugged directly into the video source/destination equipment (58 x 16 x 16mm). The Cat5E cable is broken out into separate pairs for connectioin units, the unit incorporates a cable clamp. Bandwidth up to 300m transmission 60Hz-20kHz, -3dB. Bandwidth up to 1.5km transmission 100Hz-20kHz.
500020
A single-channel unit that allows one SPDIF unbalanced digital audio signal to be transmitted over one pair of a Cat5E cable. The audio connection is an RCA(phono) plug, the Cat5E pair via screw terminals. The unit is designed in a very compact housing to allow it to be plugged directly into the video source/destination equipment (58 x 16 x 16mm). The Cat5E cable is broken out into separate pairs for connectioin units, the unit incorporates a cable clamp. Maximum transmission distance 180 metres.
500025, 500026
These enable an AES/EBU balanced digital audio signal or balanced analogue audio to be carried over Cat5E cable. Audio connection is XLR 3-pin male (500025) or 3-pin female (500026), Cat5E connection is screw terminal inside a cable gland. Maximum transmission distance for analogue line level 1.5km, mic level 900m, AES/EBU digital 380m.
Video
500000, 500009, 500031
One composite baseband video, with video connection via surface-mounted male BNC (type 500000), RCA(phono) male (type 500031) or screw-terminal block (type 500009). Bandwidth DC-8MHz, return loss greater than 15dB. Maximum transmission distance 675 metres.
500021
A single-channel unit that allows one RGB component signal to be transmitted over one pair of a Cat5E cable. The video connection is an RCA(phono) plug, the Cat5E pair via screw terminals. The unit is designed in a very compact housing to allow it to be plugged directly into the video source/destination equipment (58 x 16 x 16mm). The Cat5E cable is broken out into separate pairs for connectioin units, the unit incorporates a cable clamp. Supports one component of the YPbPr signal for transmission up to 300 metres. Bandwidth DC-8MHz, -3dB. Insertion loss less than 2dB DC-8MHz.
500032, 500037
Allows four composite video signals to be transmitted over Cat5E cable. Video connection by RCA(phono) sockets (500032) or BNC female (500037). Bandwidth DC to 8MHz, -3dB. Maximum transmission distance 675m with composite video, 300m with component video. The two models differ only in their connectors, so one of each can be used in a signal path if appropriate.
500054, 500055
These units allow one component video plus an infra-red emitter signal to be passed through Cat5E cable. Video connection is RCA(phono) plugs (500054) or sockets (500055), IR is by screw terminals. They support 480i/p, 720p and 1080i/p video formats and are suuitable for commercial and residential HDTV applications. Maximum transmission distance 300m (480i/p) or 150m (1080i/p).
500056, 500057
These units allow one component video plus one composite video signal to be passed through Cat5E cable. Video connection is RCA(phono) plugs (500056) or sockets (500057). They support 480i/p, 720p and 1080i/p video formats and are suuitable for commercial and residential HDTV applications. Maximum transmission distance 300m (480i/p) or 150m (1080i/p).
500002
Three composite baseband video or one RGB component video, via three female BNC. Supports 480i/p, 720p and 1080i/p resolution for HDTV applications. Transmission distance 300 metres for 480i/p, 150 metres for 720p and 1080i/p. Bandwith DC-60MHz, -3dB. Insertion loss 0.1dB at 0.1MHz gradually increasing to 2.5dB at 60MHz. Supplied complete with 3 BNC-BNC 250mm connecting cables.
Video/Audio
500039
Allows one composite video plus one full-bandwidth stereo audio to be transmitted over Cat5E cable. Connections are RCA(phono) plugs on short tails. Audio bandwidth 20Hz-20kHz, -3dB. Maximum transmission distance 675 metres.
500001
Allows one composite video plus two mono or one stereo audio to be transmitted over Cat5E cable. Connections are BNC female and two RCA(phono) sockets. Audio bandwidth 60Hz-50kHz, -3dB. Maximum transmission distance 675 metres. Supplied complete with 1 BNC-BNC 250mm connecting cable.
500012
Allows two composite video plus two mono or one stereo audio to be transmitted over Cat5E cable. Connections are RCA(phono) sockets. Audio bandwidth 20Hz-20kHz, -3dB. Maximum transmission distance 675 metres.
500048, 500049
These units allow one component video, one stereo audio plus an infra-red emitter signal to be passed through Cat5E cable. Video and audio connection is RCA(phono) plugs (500048) or sockets (500049), IR is by screw terminals. Audio bandwidth 20Hz-20kHz, -3dB. Maximum transmission distance 675m.
500050, 500051
These units allow one component video plus one SPDIF unbalanced digital audio signal to be passed through Cat5E cable. Video and audio connection is RCA(phono) plugs (500050) or sockets (500051). They support 480i/p, 720p and 1080i/p video formats and are suuitable for commercial and residential HDTV applications. Maximum transmission distance 300m (480i/p) or 150m (1080i/p).
500052, 500053
These units allow one component video plus one unbalanced analogue audio signal to be passed through Cat5E cable. Video and audio connection is RCA(phono) plugs (500052) or sockets (500053). They support 480i/p, 720p and 1080i/p video formats and are suuitable for commercial and residential HDTV applications. Maximum transmission distance 300m (480i/p) or 150m (1080i/p).
Ordering note:
All types are priced and sold SINGLY, these units must be used in pairs with one device at each end of the cabling.