Canford

www.canford.co.uk

92-412 SHURE MX412/N MICROPHONE 12" Gooseneck, preamplifier base, no capsule

each (ex. VAT) 1+
Price £ 134.40
Special order product. Order cancellations may incur charges
SHURE MX412/N MICROPHONE 12" Gooseneck, preamplifier base, no capsule

Manufacturers description

MX412 and MX418 Microflex® Standard Gooseneck Microphones

Microflex Standard Gooseneck microphones bring a whole new meaning to the word flexible with their fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound. 

Features

Microflex Gooseneck microphones are available in four models with a variety of heights and mounting styles to choose from. One model includes a silent mute switch with LED indicator, a Shure Microflex exclusive. And every Microflex Gooseneck features high sensitivity and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.

The polar pattern of the cartridge is indicated by the model number suffix:

C = Cardioid, S = Supercardioid, N = No Cartridge

Gooseneck Microphones

MX412/C, MX412/S, MC412/N

304.8 mm (12 in.) gooseneck Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen

MX418/C, MX418/S, MX418/C

457.2 mm (18 in.) gooseneck Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen

MX412S/C, MX412S/S, MX412S/N 

304.8 mm (12 in.) gooseneck Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

MX418S/C, MX418S/S, MX418S/N

457.2 mm (18 in.) gooseneck Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator

MX412SE/C, MX418SE, MX418SE/N

304.8 mm (12 in.) gooseneck In-Line Preamp, Shock Mount, Flange Mount, 10-ft Side-Exit (or Bottom-Exit) Cable, Snap-Fit Foam Windscreen

MX418SE/C, MX418SE/S, MX418SE/N

457.2 mm (18 in.) gooseneck In-Line Preamp, Shock Mount, Flange Mount, 10-ft Side-Exit (or Bottom-Exit) Cable, Snap-Fit Foam Windscreen
Desktop Gooseneck Microphones

MX412D/C, MX412D/S, MX412D/N

304.8 mm (12 in.) gooseneck Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen

MX418D/C, MX418D/S, MX418D/D

457.2 mm (18 in.) gooseneck Desktop Base with 10 foot Cable, Logic Functions, Programmable Switch and LED Indicator, Snap-Fit Foam Windscreen
  • Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
  • Interchangeable cartridges provide the right polar pattern for every application
  • Balanced, transformerless output for increased immunity to noise over long cable runs
  • Shock mount provides over 20 dB isolation from surface vibration noise
  • Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
  • Snap-fit foam windscreen
  • Programmable on/off switch and LED on/off indicator (MX412D/MX418D)
  • New brighter LED improves visibility under strong ambient lighting (MX412D/MX418D)
  • Logic input and output terminals for remote control or use with automatic microphone mixers (MX412D/MX418D)
  • Supplied shock mount for more than 20 dB isolation from surface transmitted noise (MX412SE/MX418SE)
  • Supplied threaded flange mount for permanently securing the microphone to a lectern, pulpit, or conference table (MX412SE/MX418SE)

Specifications

MX412, MX418, MX412S, MX418S Spec Sheet (pdf)

MX412SE, MX418SE Spec Sheet (pdf)

MX412D, MX418D Spec Sheet (pdf)

Frequency Response

     50 to 17,000 Hz

       view larger

Output Impedance

     180 ohms actual (EIA rated at 150 ohms)

Sensitivity (At 1,000 Hz, open circuit voltage*)

     Cardioid: -35.0 dBV/Pa (17.8 mV)

     Supercardioid: -33.5 dBV/Pa (21.1 mV)

     Omnidirectional: -27.5 dBV/Pa (42.2 mV)

     All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL

Maximum SPL (1 kHz at 1% THD, 1 k ohm load)

     Cardioid: 124.2 dB

     Supercardioid: 122.7 dB

     Omnidirectional: 116.7 dB

     All values +6 dB at 0 gain

Equivalent Output Noise (A-weighted)

     Cardioid: 28.0 dB SPL

     Supercardioid: 26.5 dB SPL

     Omnidirectional: 20.5 dB SPL

Signal to Noise Ratio (referenced at 94 dB SPL)

     Cardioid: 66.0 dB

     Supercardioid: 67.5 dB

     Omnidirectional: 73.5 dB

Dynamic Range at 1 k ohm load

     96.2 dB

     100 dB at 0 gain

Common Mode Rejection

     45.0 dB minimum

Preamplifier Output Clipping Level (1% THD)

     -6.0 dBV (0.5 V)

     -12 dBV at 0 gain

Polarity

     Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.

Power Requirements

     11 to 52 Vdc phantom, 2.0 mA

Environmental Requirements

     Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)

     Relative Humidity: 0 to 95%

Dimensions

     See User Guide.

User Guides

Description

SHURE MICROPHONES

A selection of the most popular designs are generally held in stock, but all the Shure range are available to order. Full brochures and data sheets are available on request. All types are 150 ohm output, with XLR connector, and are supplied complete with stand clamp, unless otherwise stated.

SM7B

Cardioid dynamic studio ‘on-air’ microphone, for radio and TV voice-over work. Switches for presence boost and LF roll-off. Yoke assembly for accurate positioning.

SM10A-CN

“Head mic” - uses same noise cancelling capsule as SM2. Intended for performers who sing as they play, or other applications requiring “hands-free” operation.

SM11-CN

Dynamic lavalier microphone, supplied with tie clip and tietack mountings.

SM48

Similar to SM58, vocalist and speech microphone, with cardioid polar pattern and enhanced mid range response. Frequency response 55-14000Hz.

SM57

Well known cardioid with presence boost for well defined drum, string and amplifier instrument reproduction. Frequency response 40-15000Hz.

SM58/SM58S

World standard rugged professional stage microphone, with distinctive Shure upper mid-range presence peak for an intelligible, lively sound. Frequency response 50-15000Hz. SM58S has integral on/off switch.

Beta 57A

In the style of SM57, but with extended LF and HF response. Tight hypercardioid response.

Beta 58A

In the style of SM58, extended HF response. Tight hypercardioid.

Beta 87A

The latest addition to the highly successful Beta series, this is a hypercardioid (uni-directional) electret condenser microphone for high quality vocal/handheld use. Designed for professional sound reinforcement, broadcast and studio applications, the Beta 87 retains its tight supercardioid pattern throughout the frequency range to provide extreme maximum isolation and feedback rejection. Highly effective shock mount system cuts handling noise to a minimum, rugged construction and grille.

Beta 87C

As Beta 87A, but with cardioid pick-up, which has reduced rear lobe and broader frontal pattern, which may be preferred by artistes using in-ear-monitors rather than wedge monitors.

MX183/MX185/MX184

Condenser lavalier microphones in omnidirectional (MX183), cardioid (MX185) and supercardioid (MX184) polar patterns, with single and dual-microphone tie-clips for placement flexibility. Also includes RK100P phantom powered belt-clip pre-amp, and snap-fit foam windscreen. Supplied with the relevant 'Microflex' capsules, so can be re-configured by using alternative pattern capsules - R183B; omnidirectional, R185B; cardioid, R184B; supercardioid (order seperately if required). Terminated with Tini-QG TA4F 4-Pin female mini connector and therefore compatible with suitable Shure wireless bodypack transmitters. Cable length 1.2m.

SM93

A diminutive lapel microphone, unusually, rectangularly shaped (9.4 × 5.8 × 3.8mm), the SM93 is equalised for optimum pick-up when worn on the chest. It is particularly suited to applications where the microphone is to be camouflaged by sewing into (black) clothing, using the bracket supplied, such as sound reinforcement for the clergy. A phantom powered pre-amplifier is provided, with in-line XLR style connector, to which it connects with a Tini-QG TA4F miniature plug.

MX392/MX393

Boundary layer microphones with interchangeable capsules. Available in omni (/O), cardioid (/C) and supercardioid (/S) versions, spare 'Microflex' capsules (R183B/5B/4B) permit change of response characteristics. Programmable membrane switches can be set to push-to-talk, push-to-mute or push-on/push-off modes. All electronics are housed in the base of the mic. These designs suit a range of applications such as conferencing, distance learning centres and churches. Each mic comes with a paint masking kit to allow the housing and the grille to be sprayed any colour to match the decor. MX392 also have logic control inputs and outputs, and have a fixed cable supplied unterminated. MX393 have detachable cable.

MX412N/MX418N

Miniature gooseneck condenser mics, available with two stem lengths, with high sensitivity and good gain-before-feedback. Gooseneck is 300 or 450mm long with a rigid section in the centre, helping to give a neater visual appearance. Mic capsule 11mm diameter, preamplifier incorporated into base, together with a variety of mounting options (locking flange mount, flush shock mount). Frequency response 80-20000Hz. MX412-N has 300mm stem, MX418-N has 450mm stem, both XLR plug-in types. Additional model MX412SE-N has side cable entry and surface mount flange. Body only, order 'Microflex' capsules separately; R183B; omnidirectional, R185B; cardioid, R184B; supercardioid

VP64A

Omnidirectional ENG handheld interview microphone, with extra high level output
(-71dBV, 0.28mV) and low signal-to-noise. Smooth presence peak with calibrated low-end roll-off tailored for speech, suppresses boominess and low frequency background noise while picking up voices with crispness and clarity.

VP88

Studio quality single point stereo microphone.

KSM32

Side-address cardioid condenser for studio recording and live sound productions. Exceptional low-frequency response, high input SPL capability and output level, extremely uniform polar response. Supplied complete with locking aluminium carrying case, elastic suspension shock mount and swivel mount. Available in champagne (KSM32/SL) and charcoal grey (KSM32/CG) finishes.

545SD

“Unidyne III” vocalist and drum microphone, with shaped response. Switchable high and low impedance, plus on/off switch. Frequency response 50-15000Hz.

565SD

“Unisphere 1” series are renowned for solving difficult acoustic problems in sound reinforcement, broadcast and recording. They have cardioid polar pattern and an extremely effective built-in spherical windshield to permit close usage without wind, noise or breath pops, switchable high and low impedance, plus on/off switch. Frequency response 50-15000Hz.

588SDX

“Unisphere B” series, economy cardioid, features similar to 565. Dual impedance, with on/off switch. Frequency response 80-13000Hz.

PG58

All PG (Performance Gear) series mics feature a cardioid polar pattern for reduced feedback.PG58 is a rugged dynamic mic for lead and backing vocals with on/off switch. XLR-XLR cable supplied. Frequency response 70-15,000Hz

PG48

Dynamic vocal mic for spoken word and Karaoke with tailored frequency response and on/off switch. XLR-XLR cable supplied. Frequency response 70-15,000Hz.

PG57

Dynamic instrument mic for acoustic and amplified instruments with tailored frequency response and on/off switch. XLR-XLR cable supplied. Frequency response 50-15,000Hz.

PG81

Electret condenser instrument mic for acoustic instruments with smooth frequency response and on/off switch. XLR-XLR cable supplied. Frequency response 40-18,000Hz. Phantom or battery (AA, supplied) powered.

PG52

Dynamic bass drum and instrument mic for with tailored frequency response and integral stand mount. XLR-XLR cable supplied. Frequency response 30-13,000Hz.

PG56

Dynamic drum mic for close micing snare, tom-toms and percussion with tailored frequency response and integral stand mount. Drum mount adapter AD50 (clips to rim of most drums) and XLR-XLR cable supplied. Frequency response 50-15,000Hz.

PGDMK4

Kit of four drum mics: one PG52 and three PG56, complete with four XLR cables and three drum mounts, in a durable case.

PGDMK6

Kit of six drum mics: one PG52, three PG56 and two PG81, complete with six XLR cables and three drum mounts, in a durable case.

Ask a question

Please select the appropriate department from the dropdown list and enter your question providing as much relevant detail as possible.

(Fields marked * are required)

  1. UK Sales

    1. 08.30 - 17.30 UK time
    2. Telephone Number Tel: +44 (0) 191 418 1122
    3. Fax Number Fax: +44 (0) 191 418 1123
    4. e-mail address E-mail: sales@canford.co.uk
  2. International Sales

    1. 08.00 - 17.30 UK time
    2. Telephone Number Tel: +44 (0) 191 418 1133
    3. Fax Number Fax: +44 (0) 191 418 1134
    4. e-mail address E-mail: international@canford.co.uk
  3. Technical Support

    1. 09.00 - 17.30 UK time
    2. Telephone Number Tel: +44 (0) 191 418 1144
    3. Fax Number Fax: +44 (0) 191 418 1145
    4. e-mail address E-mail: techsupport@canford.co.uk

All items in: SHURE MICROPHONES