Audio Technica System 10 is a compander free, digital 24-bit/48 kHz wireless microphone system. It operates in the license exempt 2.4GHz frequency band. System 10 is 'plug-and-play', making it suitable for a wide variety of user groups and applications such as presentation and musical performance. Two systems are offered, the ATW-1102 handheld vocal system and ATW-1101 UniPak body-pack system, supplied without microphone. Each configuration includes the ATW-R1100 2.4GHz fixed diversity receiver and a single 10mW portable transmitter (ATW-T1001 body-pack or ATW-T1002 handheld). A maximum of four separate systems (channels) can be operated in one location without any frequency coordination or group selection issues (Note: although individual components can be purchased separately, it is not possible to use multiple transmitters simultaneously with a single receiver). An automatic frequency selection function ensures intuitive set-up, interference-free and reliable performance. Both receiver and transmitter units incorporate an 'easy-to-read' numerical System ID display and Pair button. Set-up takes seconds, select the desired System ID number at the receiver and press Pair. Pressing the Pair button at the corresponding Transmitter initiates the Automatic Frequency Selection and pairs the devices. The system offers three levels of diversity assurance: Frequency, Time, and Space. Frequency Diversity sends the signal on two dynamically allocated frequencies and constantly monitors them. If required the system will automatically switch frequency to maintain reliable communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize duplex signal integrity.
Operating frequency: 2.4 GHz ISM band. Noise: Better than -109dB, A weighted. Distortion: Less than 0.05% THD. Operating time: 7 hours. Operating temperature: 0 to 40 degrees C. Operating range: 30m typical.
ATW-R1100 2.4GHz Receiver - Fixed
Present in all systems, the ATW-R1100 is a digital 24-bit/48 kHz diversity receiver, with two permanently attached adjustable antennas. A front panel display confirms the numerical System ID which aids multi-system set-up. Coloured Status LEDs signal AF Peak (red) when audio distortion is present at maximum modulation (Note: this is unaffected by position of volume control), and Pair Indication (green) to confirm the presence of a paired transmitter. A rotary knob provides AF Level (volume) control of both unbalanced 6.35mm and balanced 3-pin XLR-M outputs. For optimum performance it is advisable to position the receiver away from metal racking. The casing is moulded to allow stacking of up to four systems.
Audio frequency response: 20-20kHz. Audio output level: balanced 3-pin XLR: 0 dBV, unbalanced 6.35mm jack: +6 dBV. Power source: 100-240V AC (50/60 Hz) to 12V DC 5A (centre positive) switched mode external power supply. Dimensions: 190 x 46.2 x 128.5mm. Weight: 290g.
Included accessories: AC power adapter. Optional accessories: AT8674 rackmount kit, AT8675 blanking plate
ATW-T1002 2.4GHz Transmitter - Handheld
Supplied within the ATW-1102 handheld system, the ATW-T1002 2.4 GHz handheld transmitter is fitted with a unidirectional dynamic microphone capsule. Similarly to the ATW-R1100 fixed receiver, a 7-segment display identifies the numerical System ID. A soft touch switch in the base of the transmitter controls powering and mute. Coloured LED's confirm battery status and mute condition. An Input Level (Gain) control is located beneath the body screw-off cover along with miniature screwdriver for precise adjustment.
RF Power Output: 10mW nominal. Operating range: 30m (typical). Battery life: 7hrs (alkaline). Dimensions: 254.8 x 50mm. Weight: 280g (excluding batteries). Powering: 2x 1.5v AA battery (not included).
Included accessories: AT8456a Quiet-Flex stand clamp. Optional accessories: 59-127 PROCELL MN1500 BATTERY, AA size, alkaline, 1.5V (pack of 10).
ATW-T1001 2.4GHz Transmitter - Beltpack
Present in the ATW-1101 body-pack system, the ATW-T1001 UniPak beltpack transmitter uses the same 7-segment display and intuitive pairing sequence as other System 10 components. The lightweight (100g excluding batteries) plastic body incorporates a fixed antenna. Pairing and Level controls are located beneath the battery cover. Powering is via 2x 1.5v AA batteries (not included) which will provide approximately 7 hours of continuous use. Connection to lavalier and head worn microphones is via 4-pin locking HRS connector.
RF Power Output: 10mW nominal. Operating range: 30m (typical). Battery life: 7hrs (alkaline). Dimensions: 70.2 x 107 x 24.9mm (WHD). Weight: 100g (excluding batteries). Powering: 2x 1.5v AA battery (not included).
Optional accessories: AT829cW Lavalier microphone. AT831aW Lavalier microphone. ATM75cW Headworn microphone. PRO 8HECW Headworn microphone. AT-GCW Instrument cable (6.35mm jack to locking 4-pin Hirose). XLRW Low-impedance microphone input cable (3-pin XLRF to locking 4-pin Hirose). AT-GCW GUITAR INPUT CABLE (6.35mm plug to locking 4-pin Hirose). AT-GCWPRO GUITAR INPUT CABLE Heavy duty (6.35mm plug to locking 4-pin Hirose). AT-GRCWPRO GUITAR INPUT CABLE Heavy duty (right-angle 6.35mm jack to locking 4-pin Hirose). 59-127 PROCELL MN1500 BATTERY, AA size, alkaline, 1.5V (pack of 10).