Description
INTER-M PA MIXER-AMPLIFIERS
A budget range of units with a wide range of applications in industrial, commercial and recreational installations. All units carry a 5 year parts guarantee (2000 hour limit on cassette mechanisms).
PA1000B Mixer-Amplifier
Including a 30 watt into 4-8 ohm or 100 volt line output amplifier, 3 inputs(2 balanced mic, 200 ohm : XLR or 6.35mm jack (priority override on mic 1), 1 aux 10k ohms : 6.35mm jack), overall bass, treble plus master volume control and built-in chime tones (manual operation). 230V AC powered, fixed lead, no plug..
PA2000A/4000A Mixer-Amplifier
Including a 60 watt (PA2000A) or 120 watt (PA4000A), into 4-8 ohm or 100 volt line output amplifier, 6 inputs (5 balanced mic 600 ohm: XLR with input level range 0.25mV to 80mV. (back panel preset adjusts), 1 switchable unbalanced mic 600 ohms/gram 2mV (22k ohms): twin phono (RCA)), a telephone system input (paging output from phone system (not BT line): 0.775V at 600 ohm). Vox priority override is on mic 1-2 and telephone inputs. Additionally there is a preamp out (500mV, 600 ohm); main amp in (1V, 47k ohm); slave output (100mV, 15k ohm) and all on 6.35mm jack. An overall 5 band graphic equaliser plus master volume control, loudspeaker zone selection (5 zone and “all-call”) on 100 volt outputs and built-in chime and siren tones (manual operation) is also featured. 230V AC powering IEC inlet, lead supplied, no plug.
A60/120 Mixer-Amplifiers
This simple, economical range of desk top amplifiers provides a cost-effective solution to public address, show-relay and similar applications. Two versions are available with outputs of 60 and 120 watts respectively at either 70V/100V line or 4ohms. Each has five inputs; three microphone, balanced, low impedance and two auxiliary, unbalanced, high impedance. Microphone one has selectable vox priority over all other inputs. Bass and treble tone controls. Power: 230 V AC, fixed lead, no plug. Dimensions: 420mm (w) x 88(h) x 320(d). Weight: 8.9 kg/10.3 kg, A60/A120.
PAM-120A Mixer-Amplifier (with optional tuner and CD/MP3)
Designed for shop, bar, church, factory and general applications, they feature individual phantom power switching and 3 band equalisation on each of 6 universal balanced mic or line inputs with XLR connectors. These together with the channel gain controls have been located on the rear of the unit, away from the eyes of the phantom knob twiddler. The front panel has only channel and master level plus bass and treble controls, with switches for power, chime and zone control. Inputs 1 and 2 have vox priority over the remaining inputs individually defeatable on the rear panel, an additional 0dB input has priority over all the other inputs (this input has no level control and is accessed by screw terminals on the rear panel). A range of entertainment modules is available which fit into the two slots on the front panel. The left slot accepts the PAM tuner only, whilst the right slot accepts the CD/MP3 player.
Built in chime module for local or remote operation. Phantom power: 24V, for use only with microphones which are intended for use at this voltage. Input sensitivity: Variable, 1mV, 10kohms. Low level output: 1V, low impedance, for driving loop amplifiers or similar purposes. Loudspeaker zone selector: Five zone plus all-call (100V/70V outputs only). Output: 120W RMS, 100V/70V and 4ohms.
The unit is 19” rackmountable with the supplied kit. Powering 230V AC and 24V DC, IEC inlet, lead supplied, no plug. Dimensions 420(w) × 132(h) × 360(d)mm. Weight PAM-120 13.5kg.
PAM-340A Mixer-Amplifier (with optional tuner and CD/MP3)
The PAM-340A is identical to the PAM-120A in most respects, the pre-amplifier section and entertainment modules being the same. Power output is 340 watts into a 100 V/ 70V line only. The inclusion of relays in the zone control section means it is possible to utilize an optional dedicated zone microphone console (RM-05A) to address the five zones either separately or in any combination. Rack-mountable with the kit supplied. Power: 230V AC only, IEC inlet, lead supplied, no plug. Dimensions: 420mm (w) x 132(h) x 360mm(d). Weight:11kg
RM-05A Remote Five-Zone Microphone
Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.
Please note: Inter-M were previously known as Inkel PA.