This D'n'A series (Digital and Analogue) cable is designed to be suitable for both digital and analogue audio signals, with an impedance of 100 ohms which has been proven to be suitable for AES/EBU digital audio as well as analogue microphone and line level signals. Wire insulation is polypropylene, which shrinks back minimally during soldering (considerably less than PVC or polyethylene).
Wiring specifications for many public buildings call for LFH cables to be used in certain areas, notably in corridors etc. Under combustion circumstances, LFH cables have a significantly reduced smoke emission, and the gaseous products contain no toxic halogens.
FST-HD-LFH is technically identical to standard FST-HD, except that the PVC jacket is replaced by a low fire hazard material, and a protective tape is wound under the jacket.
Technical Specifications:
Conductor: |
16/0.2mm (0.5mm²) tinned copper wire |
Insulation: |
Foamed polyethylene, black, red, OD 2.25mm |
Screen: |
Bondable aluminium/polyester tape with 16/0.2mm tinned copper drain wire |
Jacket: |
Low fire hazard compound, O.D. 5.8mm (+/- 0.2mm), black, printed with metre markings |
CPR Euroclass: |
Eca |
Impedance: |
100 ohms (+/- 10ohms) |
Capacitance: |
41pF/metre core to core, 85pF/metre core to core +screen (+/- 5pF/metre) |
Conductor resistance: |
35 ohms/km |
Weight: |
3.3kg/100m |
Reel length: |
500 metres |
Cut lengths: |
Available in any multiple of 1 metre |
'FST' and 'LFH' are registered trademarks of Canford Audio Limited.