kr
€
£
kr
CHF
$

Canford

www.canford.co.uk

Soldering & crimping

Categories in Soldering & crimping

4 Products
SOLDER
Two versions are offered. A 60:40 tin-lead alloy solder is included for use by users who may still legitimately use leaded solder, however it must not be used in equipment which must comply with the…
...view more
3 Products
DE-SOLDERING TOOLS
Professional quality tools for efficient solder removal. They have PTFE nozzles, and the extraction springs are located outside the vacuum chamber to prevent sticking and promote long life. Spare…
...view more
4 Products
GOOT SOLDERING IRONS
A mains powered, temperature controlled soldering iron, suitable for use with both lead and lead-free solder. The tip temperature is variable from 250-450°C with a temperature control on the handle…
...view more
1 Products
ANTEX GAS SOLDERING IRON
A gas powered soldering iron, refillable from a standard butane lighter cannister – one charge will allow continuous operation for approximately 60 minutes. There is a built-in flint igniter in it’s…
...view more
1 Products
CONTACT CRIMP TOOL
Crimps Contact 42/64/108 way multipin connector contacts. Ratchet action for secure closing of crimp.
...view more
1 Products
EDAC CRIMP TOOL
Crimps EDAC 516 and Varelco 8016 series contacts. Ratchet action for secure closing of crimp.
...view more
1 Products
PALADIN EDAC CRIMP TOOL
Crimps EDAC 516 and ELCO (Varelco) 8016 contacts. It features embedded pin locators to properly align pins to ensure accurate, reliable crimping, and soft rubber handles for user comfort. Note that…
...view more
1 Products
ELCO CRIMP TOOL
Crimps EDAC 516 and Varelco 8016 series contacts. Ratchet action for secure closing of crimp.
...view more
10 Products
BEL STEWART CRIMP TOOLS
Ratchet type crimp tools suitable for both the Bel Stewart and generic RJ45 and RJ11 plugs supplied by Canford. They all have a full cycling, parallel action, ratchet crimp action with manual…
...view more
6 Products
CANARE CRIMP TOOL
A Swedish-manufactured crimp tool with scissors ratchet action, emergency release lever, and adjustable crimp force. Die sets are ordered separately as required. These are a two-piece precision-fit…
...view more
12 Products
PALADIN COAXIAL CONNECTOR CRIMP TOOLS
A range of ratchet-action crimp tools with interchangeable die sets. All tools feature a fully-ratcheting cycle with safety release lever, six ratchet gear settings for adjustable crimping force, and…
...view more
1 Products
PALADIN CRIMP TOOL CASES
Rugged, padded nylon zipper cases with zip closure and wrist strap, suitable for a crimp tool and four die sets, or five die sets if there is one in the tool. Dimensions: 280(l) x 115(w) x 50(d)…
...view more
2 Products
PALADIN COAXIAL CONNECTOR CRIMP TOOL KITS
A Paladin coaxial connector crimp tool plus three die sets, supplied in a padded case. Kits contain either the 1302 or 8000 crimp tool, plus die sets 2034, 2656 and 2699. The case is the Paladin…
...view more
1 Products
PALADIN COAXIAL COMPRESSION CONNECTOR CRIMP TOOLS
The Paladin 'SealTite Pro Crimper' crimps weatherproof and waterproof linear CATV 'F', BNC, RCA and right-angle compression-type connectors from most manufacturers for RG6, RG6 quad shield, RG59 and…
...view more
5 Products
PALADIN KRONE PUNCHDOWN TOOLS
All termination of wires on Krone connectors must be carried out using a special tool. The tool applies the correct pressure to both wire and contact and trims the excess wire off at the same time…
...view more
3 Products
TUK RJ45 CRIMP TOOL
A ratchet type tool for crimping RJ45 type connectors. Two die sets are available, one is for Cat5E type plugs, the other suits Cat5E and Cat6 plugs. The tool is supplied without die sets, which…
...view more
5 Products
ICM COMPRESSION CONNECTOR CRIMP TOOLS
A range of tools that are designed to service the various ICM ranges of compression connectors. ICM CPLCCT-SLM Standard compression tool The ICM CPLCCT-SLM compression connector crimp tool is…
...view more

Please select from the list of categories above

See all new products New products