These steel mounts fix to the ceiling via a bracket with cover plate; a fixed stem allows internal cable management. Both swivel and tilt adjustments to the speaker are available and can be locked to desired position.
The rectangular 160x118mm ceiling mount is a combination of mounting bracket and cover plate, the cover plate being fixed to the bracket by four M8x12 hex screws. A 20x12mm aperature on the side of the cover plate and a 62mm aperature on the mounting bracket allows both sub-surface or side exit of any cabling. Ceiling clearance of 250mm is provided by a one-piece steel stem fixed to the cover plate, internal cable management is provided via a 35x13mm aperature to the side of the stem. Fixed to the bottom of the stem is a 90x47mm bearing plate which is adjustable with 90 degrees of swivel 0-45 degrees of tilt. Loudspeakers with a vertical mounting hole spacing of 70 - 76.2mm can be mounted directly to the bearing plate. Further mounting options are provided by the K&M AP1 - AP6 series of adapter panel accessories. Maximum load capacity: 25kg. Weight: 1.79kg. Available in black or white finish.
For a range of accessories for use with these ceiling mounts see K&M LOUDSPEAKER STANDS - Accessories